INSTOCK Labs Cabinets and Accessories
-
Cabinet Fillers
INSTOCK LabsCorner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall. Rear and Center Fillers are used between back-to-back…
-
Faucet and Aerator
INSTOCK LabsFoot Operated faucet is deck mounted with a vacuum breaker. Faucet is chrome plated with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats. Faucet has a floor mounted foot operated valve. DI/RO faucet is deck mounted for distilled, deionized or…
-
Standing Height Base Cabinets with 2 doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Cold Water Faucet
INSTOCK LabsCold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.
-
Sinks
INSTOCK LabsThese durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …
-
Chase Support Assemblies
INSTOCK LabsThese Chase Support Assemblies are adjustable height, floor mounted, support assemblies for work surfaces as well as drain line and plumbing chase for piping.
-
Apron Frames with Drawer
INSTOCK LabsApron Drawer with Drawer are used to span a knee space area between two cabinets. Attachment hardware is included.
-
Standing Height Base Cabinets, Left Hinged
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Mobile Cabinet Work Surfaces
INSTOCK LabsMobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch included under the front edge of the work surface to…
-
Suspended Pencil Drawer
INSTOCK LabsSuspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.
-
ADA Sink Cabinets
INSTOCK LabsADA Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Standing Height Corner Cabinets, Right Hinged
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required.
-
Cabinet Base Molding
INSTOCK LabsCabinet base molding is installed directly on the toe-kick of a base cabinet and is the final step in installing a lab to create a finished look. The base molding has a self-adhesive back for easy application.
-
Sitting Height Base Cabinet, Left Hinged
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Wall Cabinets
INSTOCK LabsWall Cabinets are to be hung on a wall typically above a run of base cabinets. Wall cabinets come with two adjustable shelves and feature a flush bottom. Each wall cabinet includes a hanging rail.
-
Steel Pipe Enclosures
INSTOCK LabsPipe Enclosures are used to provide a cover for pipes running from the ceiling to the work surface. This enclosure can be used for island or perimeter locations. They can support pegboards or water purification systems. The cover is pre-punched for attachment and is furnished in three…
-
Sitting Height Base Cabinet
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Standing Height, Acid Storage Cabinets, Left Hinged
INSTOCK LabsAcid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…
-
End Supports
INSTOCK LabsPanel End Supports are to be used in place of a cabinet at one end of a cabinet run to support drawer frames or apron rails. Can be used to support the intersection of two aprons or rails.
-
Standing Height Base Cabinets, Right Hinged
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Knee Space Panels
INSTOCK LabsKnee Space Panels for Drawer Aprons are to be used with Drawer Aprons. Knee Space Panels for Drawer Aprons are to be used with Apron Rails. The knee space closes off the casework to the wall to create a clear sitting under the work surface.
-
-
ADA Height Base Cabinet with 3 Drawers
INSTOCK LabsADA Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Rear Wall Cabinet
INSTOCK LabsRear Wall Cabinet Fillers are used to close the space between the rear of the wall cabinet and wall created by the hanging rail. The filled is only needed when the end of the cabinet is exposed.
-
27 1/4" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Standing Height Sink Cabinets with 2 Doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Sitting Height Base Cabinets with 3 Drawers
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Wire Super Slide, for 24" deep units
INSTOCK LabsWire super slide is made of nickel-chrome wire with clear protective coating. Only for use with 24" deep units. Designed to hold metro totes.
-
32 3/8" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
32 3/8" Tall Mobile Cabinets, Right Hinged
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.