Casework
-
Sinks
INSTOCK LabsThese durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …
Related Products: Fume Hood With Sink
-
Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined…
Related Products: Acid Storage Cabinet
-
Solid Epoxy Work Surfaces
LabconcoBlack chemical-resistant work surface Dished or flat Dished surfaces feature are contoured to fit the dimensions of the enclosure and to contain spills. They are compatible with Xpert Balance Systems & Filtered Balance Stations, Purifier Class I, HEPA Filtered & Filtered PCR…
-
Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…
Related Products: Solvent Cabinet
-
Standing Height, Acid Storage Cabinets, Left Hinged
INSTOCK LabsAcid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…
-
Vent Kit For Acid Storage Cabinet
LabconcoUsed for venting the Protector Acid Storage Cabinet through the SpillStopper Work Surface and into the fume hood. Includes one plastic vent tube assembly complete with 2" diameter threaded connection locknut, flexible tubing and vent extension
Related Products: Acid Storage Cabinet
-
Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…
Related Products: Solvent Cabinet
-
Wall Cabinets
INSTOCK LabsWall Cabinets are to be hung on a wall typically above a run of base cabinets. Wall cabinets come with two adjustable shelves and feature a flush bottom. Each wall cabinet includes a hanging rail.
-
-
Cold Water Faucet
INSTOCK LabsCold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.
-
Solvent Storage Standing Height Cabinet has self-closing doors and are used to store flammables and solvents. Construction meets UFC, OSHA and MFPA No. 30-1993. Includes vent bungs with flame arrestors. The doors are self-closing and synchronized so that both doors will always fully close. The…
-
Standing Height Base Cabinets with 2 doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Mixing Faucet, Deck Mounted, Blade Handles
Water Saver Faucet Co.Application: Deck mounted mixing faucet with vacuum breaker and wrist blade handles for hot and cold water. Body: Forged brass. Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats. Handles: Forged brass wrist blade handles with…
-
27 1/4" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Protector Vacuum Pump Storage Cabinets provide an enclosed space for storing vacuum pumps. Durable, glacier white powder-coated steel construction complements laboratory casework and Labconco fume hoods. Features: a single, manual-closing, non-locking door with left or right hinge; one 115V, 60 Hz…
Related Products: Storage Cabinet
-
Cabinet Fillers
INSTOCK LabsCorner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall. Rear and Center Fillers are used between back-to-back…
-
Standing Height Base Cabinets with 8 Drawers
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
-
Standing Height Corner Cabinets, Right Hinged
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Mobile Cabinet Work Surfaces
INSTOCK LabsMobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch included under the front edge of the work surface to…
-
Sitting Height Base Cabinet, Left Hinged
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
32 3/8" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Suspended Cabinets with 4 Drawers
INSTOCK LabsSuspended Cabinet is designed to be hung from an INSTOCK table. Each suspended cabinet is furnished with complete hanging hardware.
-
Scienceware® Polypropylene Sinks
Bel-Art - SP SciencewareLaboratory sink, drain board, backsplash and legs are made entirely of polypropylene plastic for excellent chemical resistance and easy cleaning. Material is unaffected by acids, alkalis and boiling solutions under 121°C (250°F) 15cm (6") high backsplash and shorter side and…
-
Mixing Faucet
INSTOCK LabsMixing Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.
-
Surgical Scrub Sinks
Eagle Group16ga/304 stainless steel, removable front access panel, 4" backsplash, square edge on front and sides, temperature control mixing valve, Z-clips for wall mounting, includes stainless steel flat strainer drain, tail piece and p-trap, includes flexible stainless steel supply hoses.
Related Products: Sink
-
Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Suspended Pencil Drawer
INSTOCK LabsSuspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.
-
Chase Support Assemblies
INSTOCK LabsThese Chase Support Assemblies are adjustable height, floor mounted, support assemblies for work surfaces as well as drain line and plumbing chase for piping.
-
Rear Wall Cabinet
INSTOCK LabsRear Wall Cabinet Fillers are used to close the space between the rear of the wall cabinet and wall created by the hanging rail. The filled is only needed when the end of the cabinet is exposed.
-
Sitting Height Base Cabinet
INSTOCK LabsSitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
ADA Height Base Cabinet with 3 Drawers
INSTOCK LabsADA Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
