1000 mL, Flasks, Supplies
-
These PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking…
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
Double Sidearm Celstir® Spinner Flasks
DWK Life Sciences (Wheaton)With Cell Suspension Stirrer, Celstir® Entire flask assembly can be autoclaved Offered in six sizes, working capacities 25 to 1,000 mL Easy access through side arms Of Wheaton “200” borosilicate glass Cylindrical with screw neck and polypropylene cap …
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…
-
Baffles enhance aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and…
-
These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height
-
PYREX VISTA flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The flat bottom boiling flasks are designed to ASTM E-1403.
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
These PYREX® Erlenmeyer flasks with phenolic screw caps are ideal for use as a shaker flask or for mixing, media prep and storage needs. Impact resistant caps with 24-410 GPI threads are equipped with cemented-in, inert white rubber liners which are resistant to steam sterilization. Their…
-
-
Plug-seal screw caps Graduated Neck opening: 29 mm Ideal for all media prep and storage needs. Easy to use with larger volume serological pipets.
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Magna Flex™ Microcarrier Spinner Flasks
DWK Life Sciences (Wheaton)The Wheaton Magna Flex Spinner Flasks feature a flex-type, bulb-shaped glass impeller that rotates from a fixed position above liquid level around an indentation in the base of the flask. Primarily designed for use with microcarrier cultures, this unique stirring system increases stirring…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
Thomas Combustion Flask Replacements and Accessories
labForce® (powered by Thomas Scientific)6514F35 of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 6514F40 stopper fits the 500 and 1,000 mL flasks; glass hook tip on lower end; platinum sample carrier not included. Black paper sample wrappers (6514F70) absorb heat quickly for infrared…
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
Thomas-Schoniger Replacement Combustion Flasks
labForce® (powered by Thomas Scientific)Conical, of heavy-wall borosilicate glass All sizes have Standard Taper 34/28 ground joints and bell-shape lip 65 mm wide x 30 mm deep. 500 mL flask is 195 mm high: 1,000 mL flask, 230 mm. Without stopper or platinum carrier.
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Polycarbonate Erlenmeyer Flasks
CorningDisposable flasks feature wide, easily accessible mouths All flasks have Sterility Assurance Level (SAL) of 10 -6 Non-binding Wide, easy access mouth Made from optically clear polycarbonate Sizes from 125 mL to 1 L Certified non-pyrogenic Non-baffled bottoms Certified…
-
Suitable for shaker culture applications Optically clear polycarbonate Sterilized by gamma irradiation Certified nonpyrogenic Certified RNase- and DNase-free Corning Baffled Erlenlenmeyer Flasks are for use in shaker culture applications. Models are available with vent caps…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
PYREX Vacuum Filter Flask
CorningFor use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Jacketed Double Sidearm Celstir® Spinner Flasks
DWK Life Sciences (Wheaton)The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and…
-
KIMAX Dissolution Flask
DWK Life Sciences (Kimble)Capacity 1000 mL, 108 mm o.d. x 165 mm high Precision-formed borosilicate glass flask for determining the relative dissolution characteristics of drugs in capsule or tablet form. Flasks are suitable for use with most existing equipment.
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…