Vacuum Flask

For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

SYNTHWARE storage flask with high vacuum valve and side arm. Valve has a PTFE o-ring at the tip and PTFE wiper to protect the Viton o-ring on the shaft.

…bottles 45mm neck size The Denville 250ml, and 500ml Vacuum Filtration Flasks are ideal for separation and purification of your samples. Membrane material includes PES and PVDF in .22µm and .45µm. Our flasks have a wide bottle opening for easy access and pouring of your…

…flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders. This item is an accessory item for multiple kits.Features & Benefits:. Side arm connects to vacuum source with 3/8 in. I.D. hose. 1 L and 4 L flasks accept No. 8 perforated stopper. 125 mL flask…

…side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders. This item is an accessory item for the Glass Microanalysis Filter Holder Kit. Features & Benefits:. Side arm connects to vacuum source with 3/8 in. I.D. hose. 1 L and 4 L flasks accept…

…quick vacuum disconnectThese side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders. This item is an accessory item for multiple kits.Features & Benefits:. Side arm connects to vacuum source with 3/8 in. I.D. hose. 1 L and 4 L flasks accept…

Millipore Glass Vacuum Filtration Accessory ProductGround Joint Flask, 4LThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore All-Glass Filter Holders…

Millipore Glass Vacuum Filtration Accessory ProductGround Joint Flask, 1LThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore All-Glass Filter Holders…

Millipore Glass Vacuum Filtration Accessory ProductGround Joint Flask, 5L, Conical bottomThese accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration. This item is an accessory part for the Millipore All-Glass…

…using vacuum filtration. Included is a 500ml Borosilicate Filtering Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the Buchner funnel. The Vacuum Pump is simplifies the process of vacuum filtration,…

The Gas Generating Bottle is useful in the production of gasses and provides a funnel tube and a connecting tube. Includes a 500ml capacity Bottle, 2-hole Rubber Stopper, Thistle Tube and a 90 degree angle connector tube.

SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…

Used for freezing out undesired vapors in the vacuum system and also for use in conjunction with Dewar flasks.

Twin chamber vacuum trap for double protection against undesired vapors in a vacuum system. Trap can be used in a two liter Dewar flask such as 12540-07. Distance from outside of one body to outside of other is approximately 97mm; height is 250mm. Inlet and outlet have serrated fittings; O.D. of…

…filters with glass support, NS 40/35 joints, 4 L flask (included) Funnel volume is 1000 mL General description Same as Z290432 but with NS 40/35 jont (male on flask, female on funnel support) instead of rubber stopper. Vacuum filtration apparatus for HPLC solvent purification,…

…top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when the sample being…

…water source or vacuum aspirator. It is more economical than an electric vacuum pump. The pumping rate is 15ml per stroke and will displace up to 725ml of air. The pump is fitted with a valve to release the vacuum. Includes: 1 Borosilicate Filtering Flask, 500ml 1 Vacuum Pump 1 Buchner…

…for larger evaporation flasks up to 10L or small vacuum oven applications generating chemically aggressive vapors. Models 2037 & 2047 are high flow DryFast models for lab vacuum applications requiring chemical resistance – vacuum manifold filtration, vacuum ovens, and laboratory…

…removed through the vacuum connection at the top. The unique design allows the user to submerge the flask in an oil bath almost to the bottom seal on the cooling jacket thereby avoiding premature condensation. 25 mL size has a 34/45 joint; 50 mL size has a 45/50 joint. Vacuum tube on both sizes will…

The economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…

Vacuum filtration apparatus for HPLC solvent purification, particulate analysis, bacteriological studies, radiochemical determinations, quantitative gravimetric analysis, and similar applications. Clamp seals filter membrane between flanges on funnel top and funnel stem.Includes: Funnel top, funnel…

Vacuum filtration apparatus for HPLC solvent purification, particulate analysis, bacteriological studies, radiochemical determinations, quantitative gravimetric analysis, and similar applications. Clamp seals filter membrane between flanges on funnel top and funnel stem.Includes: Funnel top, funnel…

…most advanced vacuum trap system. Ideal for protection of vacuum lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your…

…while the attached trap protects the vacuum source from accidental fluid backflow. A flexible collection tube reaches from the bottle and accepts disposable 1 mL pipet tips, glass Pasteur or 2 mL pipets for work with Petri dishes, microtiter plates, flasks and centrifugal tubes. The small footprint…

…Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed polypropylene filter…

…aspirate and collect fluids using a vacuum source Holds 3200ml (108oz) and the included trap prevents fluid flow into the vacuum source Use to aspirate media, waste chemicals, cell washing solutions, and more Ideal for use with dishes, plates, flasks and tubes All parts, except the…

Vacuum trap system protects gauge heads, like our 14034, and pumps from corrosive vapors and particle fouling. System consists of a Dewar flask, cold trap and inlet arm. High-vacuum stopcocks are used throughout. Gauge & inlet arm are Ace-Thred connections. Pump & manifold connections are o-ring…

…portable vacuum system has been designed to be a totally self-contained system for use in vacuum distillations, sample degassing, vapor pressure and other preparative work requiring vacuum to 1 micron.  Please Note: System is supplied complete as shown with the exception of the dewar flask,…

…glass. Will sublime 100gms of solid sample. Cold finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp…