Ready to Ship, Glass
-
PYREX Fernbach Culture Flasks
CorningDesigned for culturing organisms requiring a large surface area to volume ratio Can also be used in serum production Takes stopper size 13 Thomas number 4912L15 features a triple baffle on the bottom outside edges to achieve maximum oxygen transfer to culture medium. NOTE: do…
-
PYREX® Rimless Culture Tubes
CorningThese reusable PYREX® rimless culture tubes offer greater convenience in plugging and rack storage. Walls and bottoms are of uniform thickness. Ends are fire-polished.
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
KIMAX Squibb Separatory Funnels With Plastic Stopper
DWK Life Sciences (Kimble)With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800
-
These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…
-
Vial 40ml od28 Cs72
DWK Life Sciences (Kimble)Name 33 Expansion Vials with Black Polypropylene Caps and PTFE-faced Silicone Septa Capacity (mL) 40 Capacity (drams) 10 OD (mm) 28 Height (mm) 98 GPI Finish 24-400 Case Qty 72 ·…
-
PYREX® VISTA™ Filtering Flasks
CorningMicro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…
-
Clear French Square Glass Bottles With Black Phenolic Cap with Poly-Seal Liner
DWK Life Sciences (Wheaton)With attached screw caps Ideal for field or general laboratory use
-
Borosilicate N-51a Glass Tissue Culture Tubes
DWK Life Sciences (Kimble)Suitable for tissue culture and general bacteriological use Provided with marking spot which also serves for orientation Caps are not included with tubes and must be purchased separately Packaged in styrofoam trays 9215D32 tube takes size 13-415 cap and is sold in cases containing…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
PYREX Tall Weighing Bottles
CorningShort length Standard Taper joints Capacities from 7 to 85 mL These PYREX tall form weighing bottles have a Standard Taperjoint style opening that accepts a closed bottom, hollow pennyhead style stopper.
-
Sample Introduction/FPD Supplies
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
PYREX Brand Hydrometer Cylinders
CorningBreakage is minimized by the heavy wall construction The large hexagonal base, sealed to the cylinder body, increases stability and prevents the cylinder from rolling off lab bench tops
-
Amber Glass Jugs
I-ChemAmber Type III glass jugs feature a PTFE-lined, polypropylene closure. Jars are suitable for use in water sampling. Recommended for UV light sensitive samples. Certified 200 and 300 series bottles are guaranteed to meet the EPAs Performance Based Specifications for…
-
KIMAX Brand Glass Stirring Rods
DWK Life Sciences (Kimble)With both ends rounded Designed from Federal Specification NNN-R-560, Type 1 Length x diameter in mm are shown in listings
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
300 mL BOD Bottles with Pennyhead Stoppers
DWK Life Sciences (Wheaton)BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…
-
BOD Bottle Accessories
DWK Life Sciences (Wheaton)BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…
-
Glass Beaker, Low Form
United Scientific SuppliesOur beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
KIMAX Squibb Separatory Funnels With Glass Stopper
DWK Life Sciences (Kimble)Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel
-
Centrifuge Tube 15 ml
CorningThese 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…
-
Inside flutings for rapid filtration For use in flasks or test tubes without filter rack
-
Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…
-
These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line…
-
PYREX® Distilling Flasks
CorningSuitable for microchemical applications Side-arm on all sizes is approximately 77 mm below the top of the neck at an angle of 75° Adaptable for use with thermometer calibrated for 76 mm immersion 50 mL flask takes rubber stopper No. 1; 250 mL flasks, stopper No. 3; 500 mL flask, stopper No.…
-
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.