Ready to Ship, SP Bel-Art
-
Scienceware® No-Wire™ Bottle & Vial Racks
SP Bel-ArtSmall enough to hold in one hand and enough choices to accommodate most vials and small bottles. Offered in 5 grid configurations Dimensions: 12.8 x 10.5 x 4.3cm H (5.08 x 4.15 x 1.70") Polypropylene; autoclavable
-
Scienceware® Radioimmunoassay Tube Racks
SP Bel-ArtOrganize over 100 samples in one rack Polyethylene racks provide practical methods of pipetting and storing a large number of samples Using alternate rows and rotating tubes makes it easy to keep track of the last tube filled Can be used in clinical labs for storage of samples Steam…
-
Cylindrical Spinbar® Magnetic Stirring Bars
SP Bel-ArtCylindrical magnetic stirring bars offer excellent centering and smooth running characteristics. Small removable pivot ring in the center adds to their versatility Pivot ring minimizes the contact area of the bar to the vessel, reduces friction and lessens marring of plastic containers …
-
Clavies® Autoclavable Bags
SP Bel-ArtClavies® bags offer maximum protection and performance for autoclavibility. The durable .05mm thick PP bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri…
-
Scienceware® Bulb Pipettor
SP Bel-ArtSaves time and eliminates mouth pipetting Tapered silicone seal provides airtight fit in all pipet sizes Excellent aspirator for use with Westergren or Wintrobe sedimentation tubes. Comes complete with an elastic cord for dedicating pipettor to a specific reagent bottle.
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
These graduated cylinders have a “nonwetting” polypropylene surface eliminates concave meniscus and makes reading easier and more accurate. Single metric scale with raised numerals for easy reading Flared top rims and large spouts facilitate pouring Octagonal shaped bases…
-
Right-to-Know safety-labeled wash bottles are pre-printed with the full color NFPA diamond and other important safety information providing compliance with OSHA requirements. Unique, patented 2-piece valve prevents pressure build-up of solvents and eliminates dangerous drips. Valve also allows…
-
Polypropylene Check Valves
SP Bel-ArtPolypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted. Useful when connecting a vacuum line to a filter flask Recommended maximum pressure 20psi (1034 Torr) Autoclavable
-
Our Largest Standard Desiccator Clear and durable PVC desiccator cabinet has sleek black ABS accents, horizontal profile, and movable shelves for adjusting dry storage space configuration for moisture-sensitive materials. Interior Volume: 2 cu. ft. Two adjustable, removable, and…
-
Scienceware® Buchner Funnels, Two-Piece
SP Bel-ArtEasy-to-clean two-piece, polypropylene plastic Buchner funnels include a molded in perforated plate. Lightweight; not top-heavy Steam autoclavable at 121°C (250°F) Use with Vac-Ring Filter Seal (1189N06) for quick filter setup
-
Scienceware® Water Bath Racks
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions 213mm x 110mm (8-3/8" x 4-5/16"). Durable polypropylene rack that sinks to the bottom of a water bath and remains upright when agitated. Height: 111mm (4-3/8"). Height top deck: 57mm (2-1/4"). Places: 72. Rows: 6 x 12. Tube size: 10-13mm.
-
Scienceware® Tech Pens
SP Bel-ArtOil-based paint marker withstands washing, weathering, mild acids, and alkalis (INK is autoclavable) Heavy duty soft tip disposable pen writes on glass, metal, ceramics, plastics, paper, and more. Withstands temperature range of -46°C to 65°C (-50°F to 150°F) and autoclaving…
-
Scienceware® Polycarbonate Hydrometer Jar
SP Bel-ArtClear, unbreakable polycarbonate cylinder has a 245ml capacity and is 3.3cm I.D. x 30.5cm H (1?” x 12”) with removable 4” polyethylene base. Hydrometer not included.
-
Unique immobilizing tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy…
-
Teflon-Coated, Polygon Spinbar Stirring Bars
SP Bel-ArtCylindrical alnico magnet sealed in polygon-shaped Teflon shell
-
Scienceware® Tefzel® Forceps
SP Bel-ArtTefzel® Fluorocarbon plastic forceps have smooth square tips 1.6mm (1/16") wide. Excellent for handling small balance weights Will withstand temperature up to 199°C (390°F); autoclavable Individually blister packed
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
100-place Polypropylene Freezer Storage Boxes 100-place polypropylene storage boxes with 10 x 10 rows provide compact, safe storage for 0.5, 1.5 and 2.0ml tubes and cryo vials. Great for organization on the bench, in the freezer, or during transport. Available in six colors for organizing and…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Micro (Flea) Spinbar® Magnetic Stirring Bars
SP Bel-ArtMicro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers. Particularly useful for environmental testing and life science applications in which small sample volumes need to be prepared and evaluated Alnico magnet…
-
Cleanware™ Glassware Scrubbing Sponge
SP Bel-ArtRemove stubborn residue on glassware with this odor-resistant, highly absorbent sponge. It's wipe dry performance is equal to cellulose, yet it maintains the desirable physical properties of polyurethane. Scours glass without scratching Contains anti-microbial technology to inhibit bacterial…
-
Scienceware® Bottle Carrier
SP Bel-ArtThis bottle carrier is made of 1/4" thick high-density polyethylene. Measures 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately Each compartment measures 8.5 x 8.5cm (3-3/8/8 x 3-3/8")
-
Alnico magnets seated in Teflon® Oval shape reduces friction and increases effectiveness in round-bottom flasks.
-
Scienceware® Slide Mailer
SP Bel-ArtChemically inert, polyethylene container has a deep screw cap to provide maximum protection against breakage. Once cap is removed slides project 12.7mm (½") out of the jar for easy grip and clean handling. Internal grooves accept 5 to 10 microscope slides 25 x 75mm (1 x…
-
Scienceware® Poxygrid® B.O.D. Bottle Rack
SP Bel-ArtThese racks have 12 places (3 x 4 rows) for 300mL Biological Oxygen Demand Bottles. Stackable for storage or refrigeration allowing 16.7cm (6-9/16") between racks Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)
-
Scienceware® Economy Dippers
SP Bel-ArtFor convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring …
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
Scienceware® Heavy-Duty Faucets
SP Bel-ArtPolyethylene Needle type O-ring seal prevents back pressure liquif from escaping through the operating knob Used with Scienceware® aspirator bottles and tanks Outlet accepts 16mm I.D. (5/8") tubing 0210D02 fits standard steel drums
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…
-
Scienceware® Vacuum Aspirator Bottle
SP Bel-ArtThe Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the…
-
Sterileware® Sampling Spatulas
SP Bel-ArtThese V-shaped spatulas are ideal for every type of powdered or granulated material. Sterileware Spatulas (9” and 14”) are made of high-impact polystyrene, individually packaged, sterilized by gamma irradiation, lot stamped, and shipped with a Certificate of Processing. Non-sterile…