Ready to Ship, Bottles, SP Bel-Art
-
Safety-vented * wash bottles provide compliance with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and OSHA's HazCom 2012 requirements - as pertains to "Workplace Labels." Pre-printed with the chemical name and formula, GHS pictogram and…
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Cylindrical Spinbar® Magnetic Stirring Bars
SP Bel-ArtCylindrical magnetic stirring bars offer excellent centering and smooth running characteristics. Small removable pivot ring in the center adds to their versatility Pivot ring minimizes the contact area of the bar to the vessel, reduces friction and lessens marring of plastic containers …
-
Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and added turbulence when compared to…
-
Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions Standard diamond alert symbols indicate the type of hazards the contents may present; CAS numbers are included where appropriate Permanent, colorful silk-screened labels put an end to…
-
Wide Mouth Wash Bottles
SP Bel-ArtLow-density polyethylene wash bottles have color-coded polypropylene closures for easy identification and wide mouths for easy filling. Choose from: Natural, Red, Yellow, Blue, and Green in 250, 500 or 1,000mL Natural also available in 125mL
-
In-Line Test Tube Rack
SP Bel-ArtFor high-visibility, this 6-place high-density polyethylene rack is end-supported by two columns. Top plate has 25 mm diameter holes; base has corresponding hemispherical wells Includes six vertical pins for tube drying Easy snap together assembly
-
Scienceware® Pipette Pump III
SP Bel-ArtSuperior design for better pipette visibility and more precise dispensing User-friendly shape for maximum comfort Lightweight for easy, one-handed use Compact design is ideal for working in hoods or glove boxes Ergonomically designed for comfort and simplicity, the Pipette Pump III has a…
-
Convenient assortment packs suit a variety of needs. Choose from octagonal, round, micro or color-coded bars to best suit your needs Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Manufactured in a registered ISO…
-
Scienceware® Positioner-Retriever, PE
SP Bel-ArtSet the Spinbar® Magnetic Stirring Bar precisely where it is wanted with no splash using the Spinbar® Positioner/Retriever. Just as easily, retrieve stirbars without coming into contact with the liquid in the container. For recovering a Spinbar® Magnetic Stirring Bar, keep the…
-
Spinplus® Magnetic Stirring Bars
SP Bel-ArtSpinplus® magnetic stirring bars add speed and efficiency to mixing operations. The "+" shape creates a deep vortex and provides stable, quiet operation Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert …
-
These egg-shaped stirring bars are designed especially for use in round-bottom vessels as they spin unrestricted by the vessel contour. Particularly well suited for round bottom flasks; shape ensures complete mixing Offers minimal contact when used in plastic containers Egg shape…
-
Six different, small size, double-ended tools (150mm long) and a pair of tweezers (145mm long) suit small sample handling needs. Each double-ended tool has two different end shapes providing 12 implements to better match user needs. Two small spoons ends for transferring and collecting both…
-
Scienceware® Indicator Bottles
SP Bel-ArtIdeal for Staining Slides Low-density polyethylene Can be used as squirt bottles with the supplied tube, and/or as dropper bottles without tube Excellent for use with indicator solutions or dyes
-
Scienceware® Stainless Steel Micro Spatulas
SP Bel-ArtThese micro spatulas are made of stainless steel rod with flat ends coated in brown Teflon® FEP. Complies with FDA regulations governing direct food contact applications Available with straight or tapered blade Ends measure 7.9W x 50mmL (5/16 x 2")
-
Scienceware® Flowmi™ Cell Strainers
SP Bel-ArtScienceware® Flowmi™ Cell Strainers provide fast and efficient filtering of small volume samples (up to 1000µl) and are unmatched at preserving sample volume. These sterile, 40µm or 70µm porosity strainers remove cell aggregates and create uniform single cell suspensions…
-
Adjustable Handle Water Sample Dipper
SP Bel-ArtFor taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm…
-
Scienceware® Bottle Carrier
SP Bel-ArtThis bottle carrier is made of 1/4" thick high-density polyethylene. Measures 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately Each compartment measures 8.5 x 8.5cm (3-3/8/8 x 3-3/8")
-
Conical Tube Holder
SP Bel-ArtMove tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.
-
The multifaceted magnetic stirring bar surface adds turbulence relative to similar size smooth cylindrical stirring bars. Ideal for single use applications mixing radioactive reagents or when cross contamination might be a concern Alnico magnet encapsulated in FDA Grade, USP Class VI…
-
Scienceware® Bulb Pipettor
SP Bel-ArtSaves time and eliminates mouth pipetting Tapered silicone seal provides airtight fit in all pipet sizes Excellent aspirator for use with Westergren or Wintrobe sedimentation tubes. Comes complete with an elastic cord for dedicating pipettor to a specific reagent bottle.
-
Make accurate additions of precious materials as needed. Rotating the toothed thumb wheel vibrates the curved tip spatula, giving you control over transfer from spatula to weighing dish. Narrow V-shaped blade and 21cm (8-1/4”) length maneuvers easily into small mouth containers and…
-
Micro (Flea) Spinbar® Magnetic Stirring Bars
SP Bel-ArtMicro (Flea) magnetic stirring bars are designed for stirring small volumes in vessels such as vials, tubes and gradient makers. Particularly useful for environmental testing and life science applications in which small sample volumes need to be prepared and evaluated Alnico magnet…
-
Scienceware® Cup Type Stoppers
SP Bel-ArtOpen at large end, with uniform taper similar to that of rubber stoppers Hollow shell polyethylene construction affords sufficient flexibility to provide secure seal Top edge is reinforced to increase rigidity Can also be inverted for use as loose or tight-fitting caps. Smooth inside walls and…
-
Color Octagon Spinbar® Magnetic Stir Bars
SP Bel-ArtOctagon magnetic stirring bars with integral pivot ring are the most commonly used shape. Choose from red, yellow or blue. Alnico magnet encapsulated in FDA Grade, USP Class VI Teflon® PTFE low friction coating; durable and inert Interrupted profile provides greater surface area and…
-
Poly-Cone Universal Joint Adapter
SP Bel-ArtThis precision-engineered adapter may be cut with a fine-tooth saw or sharp knife into various adapters, such as individual bushings, stirrer bearings, thermometer and gas inlet tube supports, drip-tips, funnels, trap connectors for tubing, etc. Forms a continuous standard taper inside and…
-
Sterileware® Sampling Spatulas
SP Bel-ArtThese V-shaped spatulas are ideal for every type of powdered or granulated material. Sterileware Spatulas (9” and 14”) are made of high-impact polystyrene, individually packaged, sterilized by gamma irradiation, lot stamped, and shipped with a Certificate of Processing. Non-sterile…
-
Scienceware® Spinbar® Restrainer
SP Bel-ArtHolds on to magnetic stirring bar Easily retrieve magnetic stirring bars from vessels with the handheld Spinbar® Restrainer. Don’t lose magnetic stir bars down lab drains and eliminate the splashing hazard when pouring out of mixing containers. The tool fits comfortably…
-
Spinvane® Magnetic Stirring Bars half-round tapered shape is designed for conical bottom centrifuge tubes. Half-round shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Manufactured to fit 9.7/6.1 x 23.0 x 9.9mm tubes;…
-
Spinvane® Triangular Magnetic Stirring Bars
SP Bel-ArtSpinvane® Magnetic Stirring Bars triangular shape is designed for small conical-shaped tubes and micro vials. Triangle shaped vane is made of solid FDA grade, USP Class VI Teflon® and has a cross-mounted, molded-in Alnico magnet Each size is manufactured for a specific size tube;…