Laboratory Tubes

Biologix clear polypropylene non-sterile (rnase & dnase free) conical bottom microcentrifuge tubes with safe lock or flat top caps available. Tubes have frosted writing area and marked graduations.

Manufactured from medium wall Borosilicate Glass Type 1 Class A, with permanent graduations designed for DNA/RNA protocols. Includes high temperature red PBT cap with PTFE faced silicone liner. Replacement cap 5639-90045 Specifications: Type 1 Class A Borosilicate Glass Size: 70x300mm

INDUSTRIAL QUALITY || 7ml (0.2oz) Test Tubes made of high quality, heavy duty, Borosilicate 3.3 glass THIN WALL || Uniform wall thickness of 1mm provides excellent thermal shock resistance RIMLESS || Flat, fire polished rims make these tubes ideal for culture testing THERMAL SHOCK RESISTANT ||...

Labcon SuperClear® cap and integral molded elastomeric seal Includes molded graduations and writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) IATA 95kPa certified to conform with USDOT HMR, 49 C.F.R., Parts 171-180 and IATA DGR UN3373 PI650 mailing tube standards and packaging...

With two-position vent stopper that fulfills two functions: When attached lightly, this enables a uniform ventilation of the tube contents When attached firmly, by pressing in the stopper further, an airtight closure of the tub

Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to 20,000...

Eight-well strip cap configuration fits most 96-well MicroWell® Plates Flexible Polyethylene provides a positive seal for each well Shallow depth of cap permits maximum utilization of well volume Each cap can be separated from strip for individual well usage and storage. Both sterile and...

EZBio® 50mL Sterile Centrifuge Tube Assembly, Single Use Technology with Tubing and Pinchpipe, Vented with Diptube and Fitting is a closed system solution. The 50mL Centrifuge Tube Assembly is ideal for biopharmaceutical sampling and transfer. The EZBio® Sampling Tube Assembly are a direct...

The Precision Systems glass sample tube is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use.

Samples of proteins, other biological molecules, and cell cultures are commonly shipped and stored on dry ice, putting them at risk of acidification by up to 2.5 pH units. In standard centrifuge tubes, CO2 vapor from dry ice enters the tube headspace and causes a significant drop in the pH of the...

5mL SuperClear® snap cap centrifuge tubes are an efficient alternative to 15mL tubes. Designed to fit the same rotors as our 15mL centrifuge tubes, you can use these tubes in procedures that require smaller sample volumes. The interior surfaces are ultra-smooth with low retention...

The Surprise Tube! For high-volume liquid samples, solids, and as storage tubes for legacy samples in traditional tube formats. Make your legacy samples automation-friendly. XXLX6000 at a Glance: Working Volume: 6.000 µl Height: 57,8 / 58,2 mm (Tube with Screw Cap / Tube with Screw Cap in...

0.2mL PCR tubes (assorted colors) are made of thin wall polypropylene and designed for precise fit in heat blocks to optimize heat transfer With domed cap for efficient heat transfer Nonsterile and certified DNase- and RNase-free Autoclavable at 121°C and will withstand centrifugation to 10,000...

Graduated Capacity 5 mL in 0.1 mL divisions, with conical tip and Standard Taper 9 ground glass stopper, Thomas number 8770J22 Length including stopper, 140 mm; o.d. 13.5 mm

Suitable for laboratory centrifuge applications and the separation of substances, Microcentrifuge tubes accommodate smaller volumes of samples. Tubes featured a tethered cap for quick and easy closure. Caplugs Evergreen microcentifuge tubes are precision molded in the USA. Molded-in tethered cap for...

The innovative VACUETTE® Blood Collection Tubes made out of virtually unbreakable PET plastic have set the standard on today‘s market. They provide improved safety and hygiene during specimen collection procedures with the advantage of being as clear as glass. Most VACUETTE® Blood...

Open (O) bottom 8-well strips are designed for membrane attachment. Our 8-well strips are compatible with all current plate readers, washers and pipetters. Every strip is precision-molded from polystyrene for minimal well-to-well variations and has uniformly low background readings. Suitable for...

Thistle Tube - Glass 7mm OD stem with Bulb top. Available in the following stem lengths: 150, 300, 400mm

Homogenization calls for a tube that is built to withstand the rigors of lysing applications. So when you need to be sure about the tube you select for lysing and bead beating, choose the brand that has the experience, innovation, and reliability of an industry leader: SureSeal DuraTubes from...

Manufactured from Type 1 Class A Borosilicate Glass. Includes long skirted black phenolic screw cap with white rubber liner. Specifications: Type 1 Class A Borosilicate Glass Screw Cap Included Size: 16 X 150mm Replacement Cap: 2029-00016 Case Quantity: 144

Sterile culture tubes are precision molded from premium-grade, chemically inert plastic materials: polystyrene (PS) for clarity and nearly-transparent polypropylene (PP) for toughness and chemical resistance. Over-fitting caps have inner ribs for two-position fits: loose for aerobic culturing and...

These pierceable caps are great for recapping vacuum blood tubes and test tubes. They are produced from santoprene (a rubberized material) and can easily be pierced with a syringe.