Gas Chromatography Tools

Celebrating Lab Professionals Week

Gas Chromatography Tools

Products (108)

Compare Tool

Select up to 3 products

  • Oxygen Pressure Regulator

    Gas Pressure Regulator Features: Barstock Body Construction Barstock bodies have a lower internal volume than forged bodies, allowing for more complete purging of atmospheric contaminants. Stainless Steel DiaphragmsUnlike elastomeric diaphragms, stainless steel diaphragms don't absorb atmospheric...

  • Combustion Tube for CHN Analysis, Quartz

    Fused quartz has been chosen because of its very high purity and low thermal expansion rate. Because we care about your safety, all combustion tubes are pressure-tested to eliminate any tubes which might contain weak spots. In addition, stringent specifications are used to insure that the combustion...

  • Glass Lined Unions

    For use with fused silica Low dead volume High temperature applications

  • Adaptor Kit for 1/16" Swagelok® Fittings

    Connects directly to a 1/16" Swagelok® union

  • Platinum Hangdown Wire Kit

    Includes six preformed wires.

  • Nebulizer Tubing Assembly for AAnalyst 200

    Nebulizer Tubing Assembly for AAnalyst 200

  • Argon/Nitrogen Regulator

    Can be used with Argonor Nitrogen and hasa CGA 580 fitting. Acolor-coded hose with1/4-inch SWAGELOKfittings is also included. Max Inlet Pressure:3000 psig

  • Rechargeable Desiccant Kit

    Rechargeable Desiccant Kit comes with four desiccant cartridges. Rechargeable desiccant cartridges are contained in rigid metal cages which are user-installable. Two cartridges are required for Spectrum 65/100/100NTS/400 and Frontier spectrometers. It is recommended to have spare desiccant...

  • KBr Window Assembly

    User replaceable parylene-coated potassum bromide sample compartment windows compatible with Spectrum One/100 and Frontier Optica.

  • One-Piece Finger-Tight Fitting

    The PerkinElmer one-piece fitting with a 1/16 Inch inside diameter features a 10-32 thread connection for a finger-tight seal and the PEEK material construction provides more strength.

  • Clear Nebulizer Capillary Tubing, 0.023 i.d., 10 ft

    High solids GemCones are for samples with high dissolved solids (up to 20%). This conespray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. GemCone nebulizers require an end cap for use with Scott Spray Chambers. This is a 10...

  • Single Slot Burner Heads for PerkinElmer AAnalyst Series Spectrometers, Slot Length: 10cm, Flame Type: Air-Acetylene

    The 10 cm burner head is designed to be used with the air-acetylene flame. Because of its long burner path length, it provides the best sensitivity for air-acetylene elements.

  • Metal Body Nebulizer Assembly with Stainless Capillary for PerkinElmer AAnalyst and Earlier AA Instruments

    A complete Stainless Steel body nebulizer with Pt/Ir capillary and Viton o-rings. Preferred for general applications with acid concentrations less than 5%, providing exceptional performance and durability. This nebulizer is compatible with PerkinElmer AAnalyst 100/300/700/800 as well as Model...

  • Stainless Steel Unions

    Low dead volume High temperature applications No back ferrules needed Can be used with Graphite, Graphite Vespel® or PTFE ferrules Suitable for glass, fused silica, metal, plastic or glass lined tubing Non-swaging and no tube distortion

  • Viton Torch Injector O-Ring 6.07 mm I.D. for Avio 200/500 & Optima 2x00/4x00/5x00/7x00 DV/8x00/4300/5300/7300 V

    Two Viton 6.07 mm I.D. o-rings are included each in the Scott/Cross-Flow Torch Injector O-Ring Kit (N0790440) and the Cyclonic/Concentric Torch Injector O-Ring Kit (N0790441).

  • Transflectance Liquids Sampling Accessory Starter Kit

    The Transflectance Liquids Sampling Accessory Starter Kit includes five liquids reflectors, five Petri dish bases, Transflectance Liquids Sampling procedure, and user guide. Compatible with NIRA, NIRA II and NIRM near-infrared reflectance accessories.

  • SS 1/16 SS Union Male Extension Nut

    The PSS Injector Starter Kit (N6120102) includes: universal connectors (5), 0.53 mm i.d. deactivated fused-silica (5 m), 2 mm i.d. quartz liner, 1 mm i.d. quartz liner, glass hourglass liner, 1/16 in. stainless steel nuts (5), 0.5 mm i.d. graphite ferrules (10), 0.8 mm i.d. graphite ferrules (10),...

  • Potassium Bromide Semi-Demountable Cell Window, Thickness: 4mm, One Pair

    By using rectangular windows instead of circular windows, the demountable cell becomes a semi-demountable cell. The semi-demountable cell can be used either as a demountable cell or as a sealed cell for high-viscosity liquids or mull samples. To order a semi-demountable cell, order the Universal...

  • Spectroscopy Cylindrical Cell, Macro With PTFE Stopper, Quartz SUPRASIL, Light Path: 10mm

    Cylindrical cells are used with spectrophotometers that have a larger, circular light beam. Each cell has an outside diameter of 22 mm and an inside diameter of 19 mm. Each package contains one cell and two windows.

  • High Sensitivity Plastic Body Nebulizer Assembly with Tantalum Capillary and Kalrez O-rings

    A complete High-Sensitivity plastic body nebulizer with tantalum capillary and Kalrez o-rings. Recommended for use with aqueous or organic solutions including aqua regia. This nebulizer is compatible with the PinAAcle 500 and 900F/H/T AA instruments.

  • 50mm Rectangular Cell Holder

    A comprehensive range of FT-NIR cells are available for use with PerkinElmer FT-NIR’s and can be found in the cells listing included in the UV section of this catalog.

  • AA Ultra Quiet Oil-Less Air Compressor, 115V/60Hz

    PerkinElmer is expanding its compressor product portfolio to include an industrial grade, quite, oil-less compressor for dependable and clean air supply. With the addition of a water separator with a 5 micron particle filter, no liquid transfers into the air supply, providing you with contaminant...

  • 10µm Stainless Steel Solvent Reservoir Sparger

    Spargers connect directly to the solvent delivery line andare easily removed for cleaning.

  • 10mm NIR Cylindrical Cell, SUP 300

    Cylindrical cells are used with spectrophotometers that have a larger, circular light beam. Each cell has an outside diameter of 22 mm and an inside diameter of 19 mm. Each package contains one cell and two windows.

Compare Tool

Select up to 3 products