Standards

For use with Cannon High Temperature/ High Shear Viscometers for measurements at 150°C and 10 -6 s -1 shear rate Based on NIST value of 1.0016 centipoise for water at 20°C; traceable to the NIST In accordance with ASTM Standard D 4624 9727U92 and U94 are non-Newtonian reference standards...

Based on NIST value of 1.0016 centipoise for water at 20C; conforms to ASTM Standards D 445, D 88 and D 2161; traceable to NIST Approximate viscosities at varying temperatures in centistokes and centipoises are given in Table 1; each standard is furnished with actual viscosity and density values....

N100 Viscosity Standard 1 L Cannon Instrument's Viscosity Standard, 1 L, is a high-quality reference fluid used for calibrating viscometers in laboratory settings. It ensures accurate and reliable measurements across a range of temperatures. This standard is essential for maintaining quality control...

For calibration of rotational viscometers Viscosity certified at 20, 23, 24, 25, 26 and 27°C Calibrated to a precision of ±0.2% NIST traceable Standards are based on the National Institute of Standards and Technology (NIST) value of 1.0016 mPa-s (centipoise) for water at 20°C...

Bond Elut NEXUS is an ultra-clean, large particle size polymeric SPE ideal for highly viscous samples, available in non-polar or weak cation exchange. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent...

CANNON Instrument Company has released a line of viscosity check oils specifically designed for verification of SAE target viscosities per ASTM D 445, D 5293, and D 4684. The CVCO (Certified Viscosity Check Oil) series includes formulated commercial engine oils with certified values for kinematic...

CANNON Low Temperature Viscosity Standards verify viscometer performance at sub-zero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM Methods including: ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfi eld Viscometer ASTM...

Bond Elut Sodium Sulfate Drying Cartridges simplify drying processes with pre-packed devices. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies...

HT22 Viscosity Standard The Viscosity Standard, 500 mL, NON from Cannon Instrument offers precision calibration for viscometers. This standard fluid is formulated to provide consistent and reliable viscosity measurements. It is suitable for use in a variety of laboratory environments where space or...

Gas Analyzer Standard Kits (2714T95 to T97) Calibration kits contain one box of 2 calibration mix cylinders, 2 regulators, 2 pieces of stainless steel 1/16 in. gas sampling tubing, and 1 carry case, all packaged separately. Gas Analyzer Standard Cylinders (2714T90 to T94) Cylinder specifications:...

This 24 hole vacuum box has a high density polyethylene (HDPE) top for acid compatibility and a clear plastic bottom for visibility of collection tubes. Overall dimensions are 57 cm (long) x 14.5 cm (deep) x 18 cm (high.) The box comes complete with a screw in vacuum gauge, a rack insert which holds...

Compare your column’s performance to the test chromatogram shipped with your J and W column from Agilent. The column test standard contains components that test the column for resolution characteristics, efficiency, and inertness. The test mixes are supplied at a concentration of 250...

The Eichrom cartridge reservoir is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is made of high quality material which ensures long lasting usage. It is easy to handle and convenient to use.

Bond Elut C18 is the most hydrophobic silica sorbent available in this range. It is the most popular SPE sorbent because of its extreme retentive nature for non-polar compounds. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact...

In recent years, quality requirements as outlined by ISO 9000, GLP, GMP and NAMAS have assumed increasing importance. As a consequence, the recommendations of pharmacopoeias have become more influential in the pharmaceutical industry. Formal performance verification of UV-Visible spectrophotometers...

CANNON CL Standards provide certified dynamic viscosity data (in cP or mPa·s) at temperatures from –5°C to –35°C. These standards are used to calibrate the CANNON Cold-Cranking Simulator (CCS) oil testing (see ASTM D 5293 and SAE Specification J300).

For determining viscosities in asphalt and polymers (see ASTM D 2170 and D 2171) Traceable NIST For Kinematic Viscosity Values (cSt), please contact Thomas Scientific

Column Test Standards validate the performance of your Agilent columns by checking such components as polarity and inertness. These standards help ensure the quality of your chromatograms. Agilent Technologies products are intended for sale/shipment within the US only. International customers should...

These columns, nominally 20mL, have an inner diameter of 1.5 cm and a "packable" volume of 17mL. Use them when a large bed volume of one of Eichrom's extraction chromatography or ion exchange resins is required. Columns are supplied with bottom frit pre-inserted, in packages of 20,...

Analytical Standard for gas chromotagaphy. Synonym: 2-Hydroxybenzoic acid methyl ester, Methyl 2-hydroxybenzoate, Oil of wintergreen, Wintergreen oil Linear Formula: 2-(HO)C₆H₄CO₂CH₃ Molecular Weight: 152.15

Conform to SAE specification J300 and ASTM D 5293 Viscosities based on NIST value of 1.0016 centipoise for water at 20°C Traceable to NIST Supplied in one pint bottles

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Bond Elut C18 OH is excellent for balanced retention of polar analytes. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.