Gas Chromatography Septa

Gas Chromatography Septa

Products (63)

Compare Tool

Select up to 3 products

  • BTO Septa

    Chromatography Research Supplies

    Maximum setpoint: 400°C Low bleed Long injection life 3 mm thick CenterGuide™ chamber in one face guide the needle with each injection.

  • Inlet Septa

    Agilent Technologies

    Agilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same...

  • Inlet Septa

    Agilent Technologies

    Agilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same...

  • Inlet Septa

    Agilent Technologies

    Agilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point...

  • 3 Layer Septa

    Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick Average life:...

  • Inlet Septa

    Agilent Technologies

    Agilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same...

  • Inlet septa

    Agilent Technologies

    The Agilent Technologies inlet septa is made from strong silicone material and works well even at 35 degree C temperatures. This septa is compatible to use with 5880, 5890, 4890, 6850, 6890, 7890 GC columns. Application: For 5880, 5890, 4890, 6850, 6890, 7890 GCs This product is only available to...

  • Septa, Low Bleed High Temperature

    BTO is Bleed and Temperature Optimized for today's most demanding GC and GC/MS applications. Septa BTO is formulated to extend low-bleed and outstanding mechanical properties or premium GC septa to the highest-temperature applications. 3 mm thick. CenterGuide™ design requires less force for...

  • Inlet Septa

    Agilent Technologies

    Agilent's general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic...

  • HT Grade BTO Silicone Septa

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Inlet Septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

  • Inlet Septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

  • Inlet Septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

  • Butyl Gray Headspace Vial Septa

    For 20 mm vials Temperature range: 40° to 120°C Does not provide PTFE barrier Not suitable for alkalines, benezene, chlorinated solvents or cyclohexane

  • Inlet Septa

    Agilent Technologies

    Agilent's general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic...

  • Inlet septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

  • Inlet Septa

    Agilent Technologies

    Agilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point...

  • Inlet Septa

    Agilent Technologies

    Agilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point...

  • High Temperature Septa

    High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm (0.125")...

  • Precision Seal red and white rubber septa

    Specially engineered to fit standard taper joints and tubes. Manufactured under white room conditions for extreme cleanliness. Made of a more dense rubber, low extractables and a better fit (50% to 80% on joints) these septa are much less likely to fail in the presence of solvents.

  • Inlet Septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

  • Inlet Septa

    Agilent Technologies

    Agilent's general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic...

  • Inlet Septa

    Agilent Technologies

    Agilent now coats each premium 11-mm inlet septa with plasma to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Our premium septa also have a recess on the injection side that guides the syringe needle to the same...

  • Inlet Septa

    Agilent Technologies

    Inlet septa are used to maintain a leak-free seal under the septum nut in the GC inlet, even after many repeated injections. The dimple in the middle of the septum guides the syringe needle through the inlet into the inlet liner to minimize damage to the needle and to ensure injection consistency....

Compare Tool

Select up to 3 products