General Chromatography Hardware

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

This assembly includes: Ajustable Torch Mount Assembly, Qty. 1 (N0790214) Viton O-Ring 20.29 mm I.D. Qty. 2 (09902223) PTFE-Coated O-Ring 2.57 mm I.D., Qty. 2 (N0791334) Torch Nut, Qty. 1 (N0776027) Torch Washer, Qty. 1 (N0776028) Torch Sleeve, Qty. 1 (N0791125)

ordinate (photometric) accuracy; potassium dichromate abscissa (wavelength) accuracy; holmium perchlorate level of stray radiation; potassium chloride resolution; toluene in hexane Set comprising six solutions in sealed cells - two referencesolutions and four test solutions. The cells are designed...

Each certificate also includes NIST documentation and information regarding the methods used. Designed to contain virtually every element in the mass spectrum for concentration checks. Multi-element Calibration Standard 1, Matrix per Volume: 2% HNO₃ per 100 mL, Concentration of Element:...

Each standard is supplied with a comprehensive Certificate of Analysis that documents its quality and reliability. Each standard: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities reported at...

Ideal for a range of high-pressure applications, these tube fittings offer a secure, leak-tight connection where four lines intersect. Crafted to withstand the rigors of vacuum and vibration conditions, they ensure reliable performance and a long service life. Their robust design meets the stringent...

Caps close end of fractional tubing Plugs close unused port of fractional tubing Available in brass or stainless steel

Available in brass or stainless steel Ensure secure, leak-proof tubing connections in your chromatography applications with Swagelok's Tube Fittings, Low Dead Volume Unions, and Union Tee. These high-quality fittings are designed to minimize internal volume, reducing sample loss and contamination...

Connect fractional tubing sections. 2713C02 to C16 are brass 2713C21 to C27 are stainless steel

FlashPure Select cartridges are packed the highest quality silica designed to help maximize performance on any flash purification instrument. Large selection of cartridge sizes Several choices of particle size Non-RFID suitable on any system FlashPure Select cartridges are designed for superior...

Nebulizer, MicroMist, borosilicate glass, standard with Agilent 7700x/e, 8800 and 7500cx/ce series ICP-MS, for most sample types except those containing hydrofluoric acid or suspended particulates. This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended...

Ferrule Tools Tools are designed to remove ferrules stuck inside fittings. Screw the stainless steel ferrule tool into the ferrule and pull it out. Use the smaller capillary ferrule tool for capillary column ferrules (0.32 mm ID column and smaller). The megabore ferrule tool is for megabore...

Conveniently designed, pencil-shaped tool and a ceramic wafer that allow you to make clean and easy cuts in fused silica, glass and aluminum-clad capillary columns. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local...

Multipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.

Modular building block-type gas-liquid separator made from chemically-resistant plastic. An exchangeable PTFE membrane in the screw cap of the separator prevents liquid from being carried into the quartz cell or ICP torch when working with strongly foaming samples. (Not for use with ICP-MS. Use P/N...

Agilent's 1200 bar removable fitting (for 1/16 in od capillaries) consists of a stainless steel screw, an internal stainless steel ferrule and a front ferrule in PEEK. The fitting can be used throughout the flow path, but because it can be re-used without losing tightness, it is especially...

Tygon Tubing for Peristaltic Pump (Purple/Purple/Purple) The Connector IIIA T-piece with nipples is designed for use with PerkinElmer's FIAS series, allowing for seamless fluidic connections. It accommodates tubes with an inner diameter ranging from 1.5mm to 2.5mm, making it versatile for various...

Multipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.

Modular “building block” type gas-liquid separator made from chemically-resistant plastic. An exchangeable PTFE membrane in the screw cap of the separator prevents liquid from being carried into the quartz cell when working with strong foaming samples.

This file set scores glass, removes burrs from metal tubing, and cleans threads. This 12-piece file set covers all the laboratory filing needs. The files are 5 1/2 in. long. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their...

MilliporeSigma's Supelclean LC-SAX SPE Tube is engineered for reliable solid phase extraction, crucial in chromatographic separation processes. These tubes facilitate the removal of unwanted components, enhancing the purity of the sample. They are designed for performance consistency, supporting...

The PolyScience ® WhisperCool ® Refrigerated Chiller is designed to deliver quiet and reliable performance over a broad range of operating temperatures and conditions. Extremely dependable and energy ef cient, it features a -10 to 40 °C operating temperature range, built-in process and equipment...

2000 psig pressure rating Temperature rating - 149°C (brass), 204°C (stainless) 1/8“ and 1/4“ tube fittings Metering valves gives very fine control of gas flow between 100 and 800 cc/min. Valve is not designed for shutoff service. The handle dead stop is factory set at a flow...