Lab Flasks

Corning BioCoat products come in a variety of pre-coated options and are an ideal solution for enhanced cell attachment and growth of a variety of primary cells and transformed cells in serum-free or serum-containing cultures. Corning offers custom coating capabilities. Disclaimer: This product is...

Synonyms: conical flasks; glass flasks; lab flask; laboratory flask Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

These 500mL PYREX(r) distilling flasks are used for the distillation of bituminous materials suitable for road treatment. Also used in the Standard Method of Test of the Distillation of Creosote Oil, American Wood Preservers Association, method 11e, Barrett method C 9, American Association of State...

Pear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap

These 125mL heavy duty PYREX® distilling flasks are suitable for microchemical applications. The sidearm is located approximately 137mm from the bottom of the flask to meet the requirements of ASTM E-1405 and can be used in ASTM tests D-86, D-233 and D-447. Adaptable for use with thermometers...

Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.

Individually calibrated to deliver at 20C. Durable ring marks resilient wear. Certified Class B with individual ring marking per DIN 122664. Supplied with screw cap. Specifications: Volume Ml: 50ml Accuracy +/- Ml: 0.10 Height: 150mm Thread Gl: 18 Case Quantity: 2  

Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they allow Spinner Flasks to operate as bioreactors...

Synonyms: flask round bottom; round bottom flasks; round bottomed flask Legal Information: Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

1000 ML FLASK, ERLENMEYER

10cm² gas permeable membrane surface area with 100 mL media capacity. Expand 5 million cells into between 200 to 400 million cells in about 10 days with NO medium exchange. [GAMMA IRRADIATED. For non-clinical, non-therapeutic, research use only.]

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum.

Round bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.

These PYREX® 200mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers....

With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C

Screw cap or stopper Meet Class A tolerances per DIN EN ISO 1042 PFA or PMP construction Highly transparent Easy to clean Flasks are manufactured from PFA (a perfluoxy copolymer), which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to...

These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical...

Ai 2L, 24/40 standard taper joint, heavy wall, round bottom 2-neck flask with one vertical 24/40 neck, and one angled 24/40 side neck. Glass material: high borosilicate glass 3.3.

Borosilicate glass volumetric flask, fitted with solid glass stopper, in compliance with ASTM-E288 standard. Eisco Labs Borosilicate glass has the following heat tolerances: Strain Point -515°C | Annealing Point 565°C | Softening Point 820°C. Calibrated to contain. Eisco Labs proudly...

Kjeldahl shape flask with a standard taper outer joint. Highly durable and designed for optimal performance, this Kjeldahl Long Neck Flask ensures precision and reliability in all distillation and laboratory processes. Engineered with high-quality glass, it offers excellent chemical resistance,...

Round bottom, HEAVY WALL two neck flask with standard taper outer joints on both the center neck and vertical side neck.

Reinforced bead at top 300 mL and larger sizes have tooled necks 10 and 30 mL sizes are designed from ASTM Specification E 147; 100 mL through 800 mL sizes are designed from ASTM Specification E 1377, Type 1 requirements.

Manufactured from Type 1, Class A, Borosilicate and ideal for all culture and media preparation/storage purposes Supplied with GL45 blue polypropylene linerless screw caps and pouring rings and graduated to approximate volumes

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use....