Lab Filtration Products

Designed for general qualitative laboratory work Fast filtering speed; 25um particle retention Low retentivity, which retains coarse or gelatinous precipitates such as aluminum hydroxide, cobalt carbonate, mercury iodide and magnesium hydroxide Creped surface; thickness approximately 0.23 mm; 24...

Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting...

Quantitative cellulose filter papers are primarily used in gravimetric analysis procedures and perform separations by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media family is also widely used in methods to prepare samples for further...

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum...

CHROMAFIL® syringe filters – Ideal for GC, HPLC and UHPLC sample filtration By using CHROMAFIL® syringe filters unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation. So, filtering your samples leads to an increase of lifetime...

CELLTREAT Vacuum Filter Systems are ideal for large volume sample separation and purification. The filter systems are manufactured in a Class 100,000 clean room, from USP class VI virgin polystyrene. The filter membrane is Polyethersulfone (PES) material in 0.22µm or 0.45µm pore sizes...

Ahlstrom MK360 is a binder-free grade made of extremely pure micro-quartz fibers and conditioned by high temperature pre-heating. MK360 is useful for testing hot "stack" gases as the quartz fibers can withstand temperatures up to 900°C. In addition, micro-quartz is used in liquid filtration when the...

Ahlstrom offers a full range of specially designed filter paper for use in the sugar industry. Ahlstrom 8613 has a smooth black finish designed for use in applications requiring visual examination of particles. Ahlstrom 613 and 615 are particularly well suited for general laboratory filtration...

Depth filtration glass micro fiber GRADE A-E - Fine porosity and fast flow rate, with a 1.0 µm size particle retention. Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm Filtration speed:...

Uniform pore structure for low binding applications where reliable, fast flow rates and high throughputs are required Polyethersulfone Plain surface Hydrophilic Withstands temperatures up to 135°C Filters are inert, providing extremely low extractable levels in critical sterilization...

EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Nylon membrane is has great chemical resistance and makes them ideal for filtering more aggressive...

Made of sturdy polypropylene and strong nylon mesh Three different pore sizes available: 40μm, 70μm, or 100μm, strainers are color-coded according to pore size for convenience Fits perfectly into Biologix 50mL Centrifuge Tubes Gamma radiation sterilized, non-pyrogenic

Banded polypropylene housing ensures lab safety preventing the housing from bursting Color-coded housing allows for easy identification of membrane Most 30mm filters have a 1 micron glass pre-filter For sample volumes of 2mL to 100mL Retention volume < 115µL Maximum operating temperature:...

Overview Millipore fibrous disc filters are available in a wide range of flow rates and throughput capacities. Glass fiber filters are available with or without binder resins and can be sterilized by EO, gamma, or autoclave (121 °C at 1 bar). Glass Fiber Filters with Binder Resin Millipore...

Nalgene filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. Polystyrene housing 90mm Supor®* machV PES membrane 90-mm diameter...

EZFlow® 90mm Glass Fiber membrane disc filters are manufactured from Borosilicate glass without binders. These glass fiber disc filters have good solids holding capacity and can be used as pre-filters for heavily contaminated solution samples. The glass fiber membrane disc filters have high flow...

Engineered by the esteemed Thermo Scientific, these Air Filter Replacement Kits are designed specifically for Ultra Low Temperature Freezers. Their core function is to maintain optimal airflow and temperature control, which are essential for the effective and efficient operation of these...

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation counting and...

Designed for general qualitative laboratory work Medium filtering speed; 6 µm particle retention Medium retentivity, which retains medium crystalline precipitates such as aluminum phosphates, barium carbonate and lead chromate Thickness approximately 0.15 mm 6 µm pore size

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables - Best recovery...

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and hydrophobic interactions similar to...

Foxx Life Sciences’ Autofil Bottle-Top Filtration Systems are disposable, sterile, vacuum operated systems for the sterile preparation of buffers, tissue culture media, microbiological media, and other biological fluids. Systems are available with asymmetric 0.22 µm (sterilization grade)...