Homogenizers

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually and...

The Mini-Beadbeater-16 is a high-energy cell disrupter designed to handle four to sixteen samples at a time. The Mini-BeadBeater-16 disrupts microbial cells and plant and animal tissue by violently agitating four to sixteen 2 ml screw-cap microvials containing small glass, ceramic or steel beads and...

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel...

Speed control from 8,000 to 30,000rpm Interchangeable shafts 6 position control dial Autoclavable stainless steel shafts The Scilogex D160 Homogenizer can rapidly homogenize, disperse, and emulsify samples in 0.1-50ml of liquid or 1-250ml depending on the generating probe. During operation, the...

The Mini-BeadBeater-24 disrupts microbial cells and plant and animal tissue by violently agitating four to twenty-four 2 ml screw-cap microvials containing small glass, ceramic or steel beads and 0.1 to 1 ml disruption buffer. Even resistant samples like yeast, spores or fibrous tissue are...

The BioHomogenizer is a rotor-stator type tissue homogenizer designed to rapidly homogenize, disperse, and emulsify biological samples in aqueous media from 1 to 1000 ml. The BioHomogenizer includes both the motor and probe. The powerful 10,000 rpm motor is totally sealed and can be hand-held or...

Chrome steel has a density of 7.9g/cc (used mostly for grinding leaves). Beads are sold in one pound bottles.

Compact digital unit with high watt motor 0.05ml - 3.5 L volume range and viscosity up to 50,000 mPas Bright LED display and user-friendly controls Can homogenize, emulsify, blend and/or mix Includes U-shape post mounted stand assembly Made in the USA with a 2-year warranty The PRO25D High-Shear...

Mfr. No. PK-01200S and PK-02200S Ideal for micro-homogenizing in following tubes; 500ul, 1.5ml, and 2ml micro-tubes Volumes as small as 0.05ml can be easily homogenized in a matter of seconds 5mm flat-bottom generator probe designed for liquid and soft samples Ideal for processing in microtubes....

Speed control from 10,000 to 29,000rpm Interchangeable shafts, rotors & stators 6 position control dial Autoclavable stainless steel shafts 2 year manufacturer warranty The Scilogex D500 Homogenizer has a maximum speed of 29,000rpm and reduces processing time significantly. The smooth motor drive...

Motor Stand Assembly for TH, GLH and THQ Homogenizers

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple...

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular work...

The three-in-one design of the DPS-20 allows the system to be used in any of the following automated configurations: - Automated Ultrasonic Homogenizing System - Automated Mechanical Homogenizing System - Automated Mechanical and Ultrasonic Homogenizing System This advanced system allows the maximum...

The MicroMincer is a compact, hand-operated screw press which macerates 0.3 grams or less of soft fresh plant or animal tissue (e.g. muscle, liver, brain, epicotyl and pulpy leaf tissue) without sample loss, heat generation, foaming or aerosol problems. Much of the sample, without added buffer, is...

Thick-walled aluminum chamber with Teflon rotor. Working volume is 15 ml. The chamber can be precooled and the superior heat capacity and large mass of the 1/2 inch thick aluminum walls will keep the sample cold. The SASC-15 can also be combined with the BeadBeater ice water jacket (the later comes...

Hand Disperser (Ecoline), dispersing devices for budget-conscious labs This ergonomic hand disperser is lightweight and therefore ideal for rapid turnaround of smaller sample volumes. The extensive range of dispersing aggregates covers a wide range of sample preparation applications. Ergonomics Easy...

Homogenizer stand

Balls made of Type 316 stainless steel For bead beating applications Use with Bead Genie™ and Disruptor Genie® Can be cleaned and reused

Zirconia/Silica has a density of 3.7g/cc (50% more dense than glass - good for spores and most tissues). Beads are sold in one pound bottles.

The Cryo-Cup Grinder consists of a stainless steel, semicircular bowl (or mortar) imbedded in a double walled, insulating cup. Up to 5 grams of hard frozen tissue is placed in the mortar precooled to liq N2 temperature. Using the special hand-held pestle made of non-heat conducting plastic, the...

The Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large...

The Temperature Probe accessory is a must-have for monitoring the temperature of sensitive samples. Simply plug the probe into the back of your Sonifier® , and position its tip at the desired depth within your sample. With Branson’s industry-exclusive True Temperature Control, the SFX...