Homogenizers

Thomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible with all homogenizer models Thomas No....

A compact, low cost screw-press designed to pulverize 50-500mg of hard, brittle material such as bone or teeth. If fresh tissue is used, the sample is cooled in liquid nitrogen to make the tissue hard and brittle, inserted into in the pre-cooled pulverizer 'nut' and then crushed by manually screwing...

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on the...

The CG-Series Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill...

Mixer designed for reliability and durability. Ideal for light-duty mixing of water-like fluids  Brushed DC motor with integrated overload protection  Durable—no wear parts that require user service  IP44 rated per IEC 60529  User-replaceable keyless chuck.

The vertical rotating mixer provides efficient but gentle mixing to keep the sample in a suspension status such as with blood mixing. It is suitable for preventing blood clots, latex diagnosis, immunoprecipitation and similar applications. Features • Color screen displaying all parameters and...

The Precellys Evolution is the most efficient and flexible bead beating tissue homogenizer on the market. Thanks to its powerful 3D precession movement associated to a high energy motor (up to 10 000rpm) and an exclusive tube locking system, the Precellys Evolution can homogenize any sample from...

Stand-disperser (High-End Line), flexible-use disperser with power cable, PC software, RS-232 / USB connection cable Applications with the highest demands for reproducibility and scaling up can be efficiently performed with this device. The fully digitized control and regulation system...

Lyses, grinds and homogenizes a wide range of samples Process up to 24 samples simultaneously Powerful refrigeration system protects heat sensitive samples Full range of beads available The Benchmark BeadBlaster 24R is a high capacity, refrigerated bead homogenizer that meets a range of sample...

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver. Working...

Homogenize most samples in under 30 sec. For volumes from 100µl to 250ml Supplied with both 5mm and 7mm generator probes Benchmark’s new handheld homogenizer, the D1000, is designed to rapidly homogenize, emulsify, suspend and disrupt biological samples. Ideal for use with microtubes,...

This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

High Quality stainless steel design and construction Flat bottom and saw tooth versions available Autoclavable or easily disassembled for cleaning Available in 5, 7, 10, and 20mm sizes Flat Bottom (Fine) Generator Probes Stator design allows fine to medium samples to pass through the processing...

The solid aluminum vial rack holds forty-eight 2ml vials. It is an important accessory for the MiniBeadbeater-96 bead mill. When temperature control of samples is a concern, the aluminum vial rack will keep the sample temperature at the desired temperature during the beadbeating process.

Small sample laboratory mixer and homogenizer Stainless steel rotor-stator Handy and mobile High speed, powerful 5,000 to 30,000 rpm motor with speed control Achieve any combination of mixing, emulsification, shredding or chopping. Homogenization in less than 1/2 mL treatable volume is possible. No...

Minilys - Low throughput homogenizer. Minilys homogenizer is a compact and flexible instrument for sample preparation. Specially designed to offer an optimal efficiency on every kind of samples. Minilys is able to handle 3 tubes of 2mL/0.5mL or 1 tube of 7mL. Its manual locking system makes Minilys...

These 40mL capacity PYREX® homogenizers are designed for grinding small samples for pathological and biochemical work. The catch basin bulb has a 55mm outer diameter. Made in accordance with Federal Specification DD-T-363a. It may be used manually but is adaptable for use with a slow speed...

The BeadBlaster™ 96 is an extremely versatile bead mill homogenizer that has applications in a variety of areas, including biological research, environmental testing, and industrial settings. Adapters are available for microplates, microtubes, and 50ml tubes. Grinding jars and balls in a...

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver. Working...

This versatile Sonifier® is perfect for all but the highest-volume applications, providing up to 250 watts of output power at 20 kHz. Like all Sonifiers in the SFX Series, the SFX250 offers the industry’s simplest user interface and the most precise control over all the critical parameters...

Adapter is required for all Mixer Style Homogenizer Product Line generator probes. (One adapter is included with each Omni Mixer, Omni Macro, and Omni Macro-ES)

The leaf tissue punch produces a single 1/4 inch dia. disc. The punch holds a standard snap-top or screw-top microvial in a position to receive the sample without further manipulation.

Garnet sharp particles are sold in one pound bottles. Average size +/- 20% Like Silicon Carbide sharp particles, these abrasive particles have sharp cutting edges that may accelerate lysis of plant and tough animal tissue in a Mini-Beadbeater vial. Unlike Silicon Carbide particles, Garnet particles...