Chromatography Columns

ZORBAX RRHD StableBond C18, 3.0 x 150 mm, 1.8 µm, 1200 bar, MVK, 3/pk. Method validation kit, includes three columns (p/n 859700-302) from three different lots. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The fluorine atoms around the phenyl ring enhance pi-pi interactions with aromatic molecules Alternative selectivity to C18 Extra retention for halogenated species Selectvity for non-halogenated polar compounds Excellent peak shape and sensitivity 1.9µm particle size columns can be used to...

The J&W DB-624 capillary Gas Chromatography (GC) column is designed for the analysis of volatile organic pollutants by GC and GC/MS. The DB-624 column is recommended for residual solvent analysis by USP Monograph , and Environmental Protection Agency (EPA) methods for volatile organic compounds...

Agilent J&W DB-1 is nonpolar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. Precision-engineered DB-1 is bonded, crosslinked and solvent rinsable, and is equivalent to USP phase G2. This product is only...

ZORBAX RRHD StableBond C8, 3.0 x 150 mm, 1.8 µm, 1200 bar, MVK, 3/pk. Method validation kit, includes three columns (p/n 859700-306) from three different lots. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Polaris HPLC columns offer many polar phase chemistries designed separate mixtures of polar and nonpolar analytes reliably and with excellent peak shapes. The polar-embedded C8 and C18 bonded phases are compatible with 100% water, and offer alternative selectivities while still complying...

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to...

Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking, CP-Sil...

Jacketed, adjustable bed chromatographic column used for recycling, ascending descending applications. Completely jacketed for better temperature uniformity with single bushing at each end allowing for quick and easy adjustment of the PTFE plunger. the 25-50 micron porous glass disc gives rapid flow...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking, CP-Sil...

Agilent J&W HP-PLOT Al2O3 KCl is the least polar alumina phase and is deactivated with sodium chloride. It is the standard column choice for light hydrocarbon analysis, particularly C1 to C8 hydrocarbon isomers. Excellent for the quantification of dienes, especially propadiene and butadiene from...

The PLgel MIXED-LS series columns use an innovative polymerization technique to eliminate the nanoparticle leakage that causes baseline noise on light scattering detectors. Columns can be installed and run on the same day. PLgel MIXED-LS offers the same robust operation and linear calibration as...

The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. This product is only available to U.S. Domestic...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Agilent J&W CP-Sil 13 CB is a 14%-phenyl/86% dimethylpolysiloxane for the analysis of halocarbons with EPA methods 601, 602, and 624, as well as other medium polarity compounds. The column offers unique sensitivity and productivity and enables separations at high flow rates, with minimum bleed when...

Special products for determination of pesticides in food samples QuEChERS method and pre-mixes Within a few years after its development by Anastassiades et al. the QuEChERS method has gained a leading position for the determination of pesticide residues in food samples by GC-MS or LC-MS, allowing...

PL-SCX strong cation-exchange materials are extremely hydrophilic and are designed for purification of biomolecules. The materials are totally polymeric and are chemically and thermally stable over a full range of HPLC conditions. The strong cation-exchange functionalities, covalently linked to a...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Virtually equivalent to a (35%-Phenyl)-methylpolysiloxane Midpolarity Very low bleed characteristics Extended temperature limit of 340/360°C Exhibits inertness to active compounds Suitable for confirmational analysis Bonded and cross-linked Solvent rinsable Replaces HP-35ms Close equivalent to...

Bond Elut Plexa PCX is another milestone in the development of simple and robust SPE methods. Plexa PCX uses a polymeric cation exchange resin that combines the outstanding properties of Bond Elut Plexa-superior flow characteristics and improved analytical performance-with strong cation exchange...

Metasil® HPLC column - excellent peak shape for basic analytes. Exceptionally high surface coverage. Improved polar compound retention. Enhanced selectivity. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.