Chromatography Columns

The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. In addition, both traditional (Pursuit) and high...

Florisil is a magnesia-loaded silica gel. Like silica, it is extremely polar in nature and ideal for the isolation of polar compounds from nonpolar matrices. The larger particle size of the sorbent enables fast flow for large sample volumes, and is therefore an attractive alternative to silica if...

YMC-Pack C4 (Butyl) columns are less hydrophobic than C8 or C18 packings, and generally utilize more aqueous eluents than either of these reversed phase column types. When compared to C8 and C18 columns using the same eluent, C4 columns show significantly shorter retention for non-polar compounds....

Agilent J&W DB-EUPAH columns are designed and tested to provide superior performance for all 16 EU-regulated polycyclic aromatic hydrocarbons (PAHs). The columns deliver excellent resolution of critical PAH isomers, such as benzo(b,j,k)fluoranthene and great thermal stability for accurate analysis...

The Agilent J&W DB-HeavyWAX Polyethylene Glycol (PEG) is a high-temperature WAX column that can operate at higher maximum temperatures (280 °C isothermal, 290 °C programmed) than standard WAX columns. This allows for shorter run times, providing a lower cost per test. The column provides retention...

Agilent Polaris HPLC columns offer many polar phase chemistries designed separate mixtures of polar and nonpolar analytes reliably and with excellent peak shapes. The polar-embedded C8 and C18 bonded phases are compatible with 100% water, and offer alternative selectivities while still complying...

The Agilent Bio WAX 10 um IEX column measuring 2.1 mm ID x 250 mm L is made from cross-linked non-porous particles and the polymeric layer prevents non-specific binding. Densely packed functional groups offers good resistance to high pressures that in turns increases resolution. Application: Oligos,...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

Agilent J&W CP-Sil 5 CB is a general-purpose, nonpolar column containing a 100% dimethylpolysiloxane (PDMS) phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. Due to extensive crosslinking, CP-Sil...

Ascentis Express Peptide ES-C18 columns are specifically engineered to separate higher molecular weight compounds such as peptides and small proteins. These columns contain advanced Fused-Core particles that have larger pores (160 Å versus 90 Å in standard Ascentis Express), bonded with...

eXtra Dense Bonding (XDB) is key to the exceptional performance of ZORBAX Eclipse XDB columns at intermediate pH. This dense bonding is accomplished by adding an extra-dense monolayer of C18, C8, phenyl, or CN-silane to the ultra-pure, fully-hydroxylated, ZORBAX Rx-silica surface. The packing is...

LiChrospher 100 RP-18, 5 µm, 4.0 x 125 mm cartridge (AC), 3/pk (use with hardware kit 5021-1845) Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent...

Bond Elut C2 is a fairly nonpolar sorbent because of the short chain length of the functional group. C2 is often used during the process of method development if analytes are retained too strongly on a C8 or C18 phase. The polarity of C2 is slightly lower than a cyano phase for polar interactions....

PLgel individual pore size GPC columns offer the highest resolution within a narrow molecular weight range. Columns may be stacked to extend the molecular weight range. Individual pore columns are generally recommended for very small and very large polymers, which can be difficult to resolve using...

Agilent J&W HP-PLOT U consists of bonded, divinylbenzene/ethylene glycol dimethacrylate coated onto a fused silica capillary. It is suitable for analyzing hydrocarbons (natural gas, refinery gas, C1-C7, all C1-C3 isomers except propylene and propane), CO2, methane, air/CO, water, and polar...

InfinityLab Poroshell 120 superficially porous columns for reversed-phase liquid chromatography (LC) separations offer exceptional efficiency and reliability. Twenty chemistries - from various C18 columns to other unique phases - are available in up to three particle diameters: 1.9 µm, 2.7 µm, and 4...

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W...

Agilent provides a range of high-performance column ferrules for various third-party gas chromatography instruments, including PerkinElmer, Thermo Scientific and Varian/Bruker. Graphite, Vespel/graphite, and Vespel column ferrules create consistent, leak-free seals with minimum torque. All column...

PL-SAX for Biomolecules is ideal for the anion-exchange HPLC separations of synthetic oligonucleotides. The covalently linked strong anion exchange functionality extends the operating pH and temperature range, essential for oligonucleotide purification and analysis. With PL-SAX for Biomolecules,...

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,...

The Agilent universal ultra inert press fit column connector made of high quality material is ideal for GC. Application: For GC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

100% Dimethyl Polysiloxane Non-polar column Dimensionally stabilized phase Low bleed Specifically designed for high temperature hydrocarbon analysis Ideal for simulated distillation Application Areas: ASTM methods D2887 and D6532 Operating Temperature: Polyimide Clad:  0.1-0.9µm film...

Supelclean(TM) LC-18 SPE tube is used in the extraction of nonpolar to moderately polar analytes from aqueous samples. Legal Information: Supelclean is a trademark of Sigma-Aldrich Co. LLC