Lab Clamps, Stands & Supports

Both sides of the clamp have screw-type fittings that allow you to lock, release, or tighten as needed. The boss head clamp will accept rods up to 1.9cm in diameter. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including BPA, nickel, and lead, which are known to the State of...

EISCO Thermometer Clamp (with Boss Head) (1) Thermometer Clamp This thermometer clamp has adjustable 360° jaw rotation. Accepts rods up to 16mm in diameter and thermometers 6 to 12mm in diameter. The clamp is die casted and the thermometer jaws are made of phosphor-bronze. Overall length is 140mm.

2 Prong Adjustable Universal Clamp with an adjustable 7.5"-8" length This clamp with boss head is ideal for use with straight sides glassware apparatus such as tubes, flask necks, and burettes Accommodates objects up to 3" and has non-slip vinyl coated rubber prongs Adjustable thumb screws on both...

These threaded base plates are designed to attach to a tabletop or inverted into a recessed hole for flush mounting. Models are available with either a threaded hole completely through the center or with an unthreaded thru-hole. These die-cast units are supplied without rod. Other sizes are...

This cast-aluminum double burette clamp can attach to a support stand and hold up to two burettes securely. It has rubber grips to improve the grip on the burettes. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to the State of...

HIGH QUALITY || Rod made of high quality steel STABILITY ||  Provides superb stability for experiments & setups THREADED || Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES || The durable and sturdy construction of this set makes it an excellent...

HIGH QUALITY || Made of high quality stainless steel STABILITY || Provides superb stability for experiments & setups THREADED || Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES || The durable and sturdy construction of this set makes it an excellent...

Self closing brass test tube clamp with finger grips and without finger grips

Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest fume hoods. Clamps...

For ball-and-socket or O-ring glass joints in universal use for quick, convenient and safe mounting and dismantling of apparatus Strong, linear spring closing action Unique forked-shaped jaws provide uniform compression for safe, leak-free seals Screw-locking device with spring for maximum security...

One piece pinchcocks molded of autoclavable white polycarbonate Release by thumb pressure 2848W26 Mini Clamp is single position on-off clamp; for use with thin-wall tubing less than 3/16” o.d. 2848W30 Clamp is 15-position ratchet- type for one-hand, stepwise flow control or shutoff; for use...

Nylon Apparatus Flange Vertical Base Plate Corrosion-resistant; they will not corrode or rust Accommodates (1/2") rod Locked with 14"-20 hex screws

303 stainless steel support rods, 13mm (1/2") O.D. for use in place of aluminum or fiberglass. For use with all standard laboratory connectors.

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp...

Steel rod, zinc-plated extension support rings. Rod diameter 7 mm (0.27”) and the straight rod portion of each is 7.25” (184 mm) long. Open support rings are ideal for use with funnels, boiling flasks, and separatory funnels.

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Cast iron bases with gray enamel finish. The base is 3mm thick with a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the...

Solid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.

Sturdy Tripods featuring adjustable openings through the use of detachable rings.

Lab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole...

The Chemglass standard taper joint clamp is mainly used for supporting flasks, beakers or burettes while conducting experiments. It is made of sturdy PTFE material which ensures durability and long lasting usage. It is color coded for easy identification.

Aldrich benchclamp clamps have a nickel-plated finish and are corrosion resistant. The clamps come with slip-on fiberglass finger covers. The Grippy Knob design has a round nut which is easy to turn making tightening the clamps around glassware fast and convenient. Synonyms: bench clamps Legal...

Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.