Tapes

Tapes

Products (69)

Compare Tool

Select up to 3 products

  • Conductive Rubber Bands, ESD, Black

    Bundle and protect ESD sensitive IC Tubes, Trays, Boxes and Carriers quickly and safely. Vulcanized Natural Rubber Surface Resistivity: 10e6 ohms/sq Static Decay Rate: Less than 2 sec ESD Shelf Life: Permanent, Washable and Reusable  

  • Statshield Dissipative Chair Cover, Royal Blue

    Dissipative (1 x 106 to Converts non-ESD chairs to low charging, groundable chairs. Washable Polyester/Cotton Blend Extends lifespan of chairs by preventing dirt and contamination build up. Chair Back and Seat Connected to Drag Chain Allows chair to be grounded when on a conductive surface. Made In...

  • ESD Solvent Dispenser, 6 oz. Standard Pump

    I.C. Static Dissipative Solvent Dispenser with a stainless-steel pump allowing fluid to pour into a stainless-steel reservoir.  Our ESD Safe dispenser has an average surface resistivity of 10^9 to 10^10 Ohm/sq. and will dissipate a static charge of +/- 5000V in less than two seconds. No...

  • Two Snap Dual Wire Coil Cord, 12", 4mm

    The Transforming Technologies CC2080 Series Dual Wire Coil Cord's polyurethane coil insulation and strain relief molding offers excellent coil memory and endurance. Dual grey and black 4 mm sockets help maintain a constant connection. Dual wire wrist straps provide redundancy. When used with...

  • Metro Smart Tray System, ESD Tray Rubber Inlays, Blue Top with Black Bottom

    The ESD-safe SmartTray facilitates efficient tracking of work-in-process and finished goods with the use of bar code technology.

  • SCS Anti-Fatigue Rubber Mat

    SCS (A Division of DESCO Industries)

    The SCS anti-fatigue rubber mat measuring 3 Feet x 5 Feet, is mainly used for ESD sensitive electronic devices. It is made of high quality rubber material, which ensures durability and long lasting usage.

  • Leg Strap, 1.5 Inches Wide, White C3 Nano Cleanroom
  • SCS Heel Grounder with Dual Cup

    SCS (A Division of DESCO Industries)

    The SCS heel grounder with dual cup, is used for maintaining body to ground connection. It is mainly used for ESD sensitive electronic devices. This grounder with elastic hook and loop nylon strap and is easy to install.

  • Tyvek Wafer Separator, Grade 1056D, White, 125mm, 5" Diameter, Round

    The Tyvek wafer separator by Malaster is designed for use in environments where contamination control is crucial. Made from Grade 1056D Tyvek, it provides a reliable barrier between wafers during transport and storage. With a 125mm diameter, it fits standard wafer sizes, and its white color ensures...

  • Anti Static Sheet

    Fruth Custom Plastics

    The Fruth Plastics anti-static sheet measuring 4-1/2 x 4-1/2 Inch has a durable nylon construction and is used mainly for storage and packing applications. Anti-static property prevents any potential harm to the user.

  • SCS Dual Conductor Coiled Cord

    SCS (A Division of DESCO Industries)

    The SCS 5 Feet dual conductor coiled cord offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage.

  • Foamtec International ESD Pick

    Foamtec International

    The Foamtec International ESD pick is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

  • Anti Static Sheet

    Fruth Custom Plastics

    The Fruth Plastics anti-static sheet measuring 8 x 8 Inch has a durable nylon construction and is used mainly for storage and packing applications. Anti-static property prevents any potential harm to the user.

  • Polyurethane Foam (100ppi)

    The TekniSwab is an excellent critical-purpose swab that features our textured microfiber for best "pick-up" providing consistent force & cleanliness for cleaning small and hard to reach areas. Constructed with double layers of microfiber & polyester fabric, the ideal swab to...

  • SCS Dual-Wire Coil Cord

    The SCS MAGSNAP 360™ dual-wire coil cord with 3.5 mm right angle phono plug connector, offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage.

  • Static Dissipative Rubber Bands

    Bundle and protect ESD sensitive IC Tubes, Trays, Boxes and Carriers quickly and safely. Vulcanized Natural Rubber Surface Resistivity: 10e7 - 10e9 ohms/sq Static Decay Rate: Less then 2 sec ESD Shelf Life: Approximately one year

  • Fruth/CRFB Sheet

    Fruth Custom Plastics

    The Fruth Plastics anti-static fruth/CRFB sheet is suitable for use in research facilities and chemical laboratories. It is made of sturdy 2-mil thick, nylon material which ensures durability and long lasting usage.

  • 3M Humidity Indicator Card (HIC), 6 spot, 200/Can

    SCS (A Division of DESCO Industries)

    Monitors the widest humidity range. 6 Spot

  • Swab, Alpha ESD, Long Handle
  • Micro Alpha ESD Swab, Knitted Polyester Tip, Static Dissipative

    The Micro Alpha ESD Swab is an excellent dissipative swab for cleaning very small grooved, slotted and recessed areas. Its laundered, knitted Alpha polyester head is extremely clean. A compact, electrically dissipative handle and flexible internal head paddle provide support and control. The handle...

  • SCS Dual Conductor Coil Cord

    SCS (A Division of DESCO Industries)

    The SCS 2300 series dual conductor coil cord with 3.4 mm straight mono plug, offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage. If one conductor is damaged, the operator will maintain the...

  • Lab-Tips Point Tip Foam Head ESD Swab

    The LTO70PESD swab with pointed head features an ESD safe handle, engineered with static dissipative polymer. Its laundered open cell foam head combines, superior cleanliness with particle entrapment capability. Its ridged head design further enhances cleaning efficiency. The small tapered handle...

  • Mini ESD Pick, 3 inch, Clear

    Designed by industry leader ITW Texwipe, this 3-inch Mini ESD Pick is an indispensable tool within the realm of detailed hardware tasks. Crafted with a clear, electrostatic discharge (ESD) safe material, it ensures the safe handling of sensitive electronic components, mitigating the risk of...

Compare Tool

Select up to 3 products