Solvents

Solvents

Products (1694)

Compare Tool

Select up to 3 products

  • < Previous
  • > Next
  • Uvasol® Dimethyl Sulfoxide For Spectroscopy

    Formula: (CH3)2SO CAS No.: 67-68-5 Solubility: 1000 g/l (20°C) Melting Point: 18.4°C Molar Mass: 78.1 g/mol Boiling Point: 189°C (1013 hPa) Vapor Pressure: 0.6 hPa (20°C) Flash Point: 87°C Refractive Index: 1.48 (20°C) Explosion Limit: 1.8 - 63.0 %(V) Density: 1.10 g/cm3 (20°C) Ignition Point: 301°C...

  • Tert-Butyl Alcohol

    Composition: tert Butyl Alcohol 100% Boiling Point: 83 °C CAS Number: 75-65-0 Density: 0.79 Chemical Formula: (CH3)3COH Molecular Weight: 74.12 g/mol Melting Point: 23-26 °C Color: Colorless liquid Physical State: Liquid Flash Point: 11°C Refractive Index: 1.386 to...

  • Suprasolv® ECD And FID Tert-Butyl Methyl Ether For Gas Chromatography

    Formula: (CH3)3COCH3 CAS No.: 1634-04-4 pH: (H2O) not applicable Solubility: 42 g/l (20°C) Melting Point: -108.6°C Molar Mass: 88.15 g/mol Boiling Point: 55.3°C (1013 hPa) Vapor Pressure: 268 hPa (20°C) Flash Point: -28°C Explosion Limit: 1.5 - 8.5 %(V) Density: 0.74 g/cm3 (20°C) Ignition Point:...

  • Benzimidazole for synthesis

    CAS Number: 51-17-2 Solubility: (20°C) insoluble Melting Point: 170 - 173°C Molar Mass: 118.13 g/mol Boiling Point: >360°C

  • N-Amyl Alcohol (Pentan-1-Ol) For Analysis EMSURE®

    Formula: CH3(CH2)4OH CAS No.: 71-41-0 UN No.: UN1105 pH: (22 g/l, H2O, 20°C) neutral Solubility: 22 g/l (20°C) Melting Point: -79°C Molar Mass: 88.15 g/mol Boiling Point: 138°C (1013 hPa) Vapor Pressure: 2.6 hPa (20°C) Flash Point: 49°C Refractive Index: 49°C Explosion Limit: 1.6 %(V) Density: 0.815...

  • Ethyl Acetate

    Honeywell Burdick & Jackson

    The Honeywell ethyl acetate is used in chemical laboratories and research facilities for the process of HPLC and spectrophotometry for the analytical specification of USPs. Application: For Hplc, Spectrophotometry, Meets Analytical Specification of Usp

  • Riedel-de Haen Diethyl ether contains BHT as inhibitor, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., =99.8%

    Diethyl ether (DEE) is widely employed as solvent for Grignard synthesis. Its efficacy as solvent for formalin-ether (F-E) sedimentation technique has been studied. It has been reported as a hydroboration solvent. DEE is a promising compression-ignition fuel and its energy density is much higher...

  • Methanol, ultrapure, HPLC Grade, 99.8+%

    Thermo Scientific Chemicals

    Formula: CH3OH Formula weight: 32.04 Purity: 99.8+% CAS Number: 67-56-1 UN Number: UN1230 Hazard Class: 3 Packing Group: II Harmonized Tariff Code: 2905.11 Hazard Statements: H225-H301-H311-H331-H370 Highly flammable liquid and vapour. Toxic if swallowed. Toxic in contact with skin. Toxic if...

  • 2,2,2-Trifluoroethanol, 99%

    CF3CH2OH CAS#: 75-89-8 F.W.: 100.04

  • Riedel-de Haen Dimethyl sulfoxide ACS reagent, =99.9%

    Chemical synonyms: DMSO Density (g/cm3): 1.1 Flash Point (°C): 87 °C Molecular weight: 78.13 Molecular formula: (CH3)2SO Chemical purity: =99.9%

  • Sulfosuccinic acid (70% solution in water) for synthesis

    UN Number: UN3265 Solubility: (20°C) soluble Boiling Point: 140°C (1013 hPa) Density: 1.46 g/cm3 (20°C) pH: 1 (H2O, 20°C) (saturated aqueous solution)

  • Buffered Peptone Water

    Used for pre enriching injured Salmonella species from food and other specimens to repair cell damage and facilitate recovery. Contains Tween to neutralize chemical residue.

  • Acetonitrile/TFA, Mobile Phase 0.05%

    Stabilized with Ethanol Synonyms: Trichloromethane Formula: CHCl3 Formula Weight: 119.38 CAS Number: 67-66-3

  • Pyridine, Anhydrous

    Honeywell Burdick & Jackson

    Suggested Applications: Applications requiring low water content Synonyms: Azabenzene, Azine Structural Formula: C5H5N CAS number: 110-86-1 Hazard Class: 3 Package Group: II UN number: UN1282

  • Toluene, HPLC

    Avantor - J.T.Baker®

    Formula: C6H5CH3 Formula Weight: 92.14 CAS Number: 108-88-3 Description: For Use in Liquid Chromatography

  • Burdick & Jackson Water with 0.05% Trifluoroacetic acid

    The Burdick & Jackson water 0.05% trifluoroacetic acid content is used in chemical laboratories and research facilities for the process of HPLC and spectrophotometry for the analytical specification of USPs. Application: Labready™ Solvent Blend, for Lc-Ms and Hplc Using custom blends not only helps...

  • Chloroform, Laboratory Plus

    Honeywell Burdick & Jackson

    Stabilized with amylene, does not contain ethanol. Suitable for organic synthesis, cleaning and isocratic and preparative LC. Formula: CHCl3 M.W.: M.W. 119.38 g/mol Boiling Pt: 61.2°C (1013 hPa) Melting Pt: –63.5°C Density: 1.48 g/cm³ (20°C) CAS: 67-66-3 EINECS:...

  • N,N-Dimethyl-p-toluidine for synthesis

    CAS Number: 99-97-8 UN Number: UN2810 Solubility: 0.65 g/l (37°C) Melting Point: -15°C Molar Mass: 135.21 g/mol Boiling Point: 215°C (1013 hPa) Vapor Pressure: 0.1 hPa (20°C) Flash Point: 76°C Refractive Index: 1.546 (20°C, 589 nm) Density: 0.94 g/cm3 (20°C) Ignition...

  • Petroleum benzine boiling range to about 40°C EMPLURA®

    CAS Number: 64742-49-0 UN Number: UN1268 Solubility: (20°C) practically insoluble Boiling Point: Flash Point: -56°C Explosion Limit: 1.3 - 7.8 %(V) Density: 0.63 g/cm3 (20°C) Ignition Point: 245°C

  • Riedel-de Haen Hexane, mixture of isomers ACS spectrophotometric grade, =98.5%

    Chemical synonyms: Hexanes; Isohexane Product Brand: Spectrasolv Density (g/cm3): 0.672 Flash Point (°C): -26 °C Molecular weight: 86.18 Molecular formula: C6H14 Chemical purity: =98.5% UN Number: UN1208

  • OmniSolv® Ethyl Alcohol Non UV, Denatured

    Formula: CH3CH2OH + denaturants Formula Weight: 46.07 CAS Number: Synonym(s): Ethanol

  • Sodium Hydroxide, 0.5N Volumetric Solution, BAKER ANALYZED Reagent

    Formula: NaOH Formula Weight: 40.00 CAS Number: 1310-73-2

  • Acetone, UltimAR

    Avantor - Macron Fine Chemicals™

    Suitable for Liquid Chromatography, Extract/Conc, UV-Spectrophotometry Formula: CH3COCH3 Formula Weight: 58.08 CAS Number: 67-64-1

  • Nuclease Free Water (DEPC Treated)

    Components: Water() Method: Deionized water (18.2 megohms-cm ± 1) was treated with 0.01% DEPC and incubated at 37°C for 12 hours. DEPC treated water was autoclaved for 2 hours at 15 psi (121°C) on liquid cycle to inactivate DEPC. pH: < 7.0 Storage: Room Temp.

  • < Previous
  • > Next

Compare Tool

Select up to 3 products