Buffer Solutions

This buffer is a 10X concentration. Optimum performance is achieved using this product diluted 1:10 in deionized water. This buffer was prepared using ultra pure reagents dissolved in pharmaceutical grade water (WFI) and consists of a proprietary protein formulation in TRIS buffered saline at pH...

Composition: Water 89.71%, Sodium Sulfate Anhydrous 9.36%, Sodium Carbonate 0.94% Boiling Point: Approximately 100°C Density: 1.07 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT...

6M Guanidine Hydrochloride

Chemical name: Nitric acid Product Brand: Analytical Density (g/cm3): 1.03 Molecular weight: 63.01 Molecular formula: HNO3 UN Number: UN 2031

CAS: 77-86-1 EC No: 201-064-4 MDL No: MFCD00004679 RTECS: TY2900000 Crystalline Molecular Formula: C₄H₁₁NO₃ MW: 121.14 Melting Point: 169° Boiling Point: 288° (decomposes below boiling point) Density (g/mL): 1.353

Chemical name: Bromine (bromide-bromate) solution Product Brand: Analytical Material form: Solution Chemical purity: 60.0% UN Number:

CAS No.: 10028-24-7 pH: 9.0 - 9.4 (50 g/l, H2O, 20°C) Solubility: 93 g/l (20°C) Melting Point: 92.5°C Elimination of water of crystallisation Molar Mass: 177.99 g/mol Bulk Density: 850 - 1000 kg/m3 Density: 2.1 g/cm3 (20°C) Ignition Point: 9.0 - 9.4 (50 g/l, H2O, 20°C)

This is a GMP-grade product that is manufactured in compliance with our Quality Management System in ISO 13485 certified facilities., 135mM Sodium Chloride, 2.7mM Potassium Chloride, 4.3mM Disodium Phosphate, 1.4mM Monopotassium Phosphate

Chemical name: Sodium hydroxide Chemical synonyms: Sodium hydroxide solution Product Brand: Analytical Density (g/cm3): 1.53 Molecular weight: 40 Molecular formula: HNaO UN Number: UN 1824

Borax anhydrous is typically used as a buffer component. The Merck Index lists other uses as: used in the manufacturing of glazes and enamels, a component in tanning agents; curing and preserving skins, an agent used in cleaning compounds, used to artificially age wood, as a preservative, either...

Synonyms: TAE buffer Application: Ready for use in gel electrophoresis after dilution to working concentrations. Preparation Note: Prepared with Biotechnology Performance Certified Trizma base (T6066) and Molecular Biology Reagent EDTA disodium salt (E5134). Solutions also contain acetic acid...

1.5% Tryptone, 0.5% Soytone, 0.5% Sodium Chloride, 1.5% Agar, 5.0% Sheep's Blood

All of our Dullbecco's Phosphate Buffer Saline Solutions contain: Potassium Chloride, Potassium Phosphate Monobasic, Sodium Chloride, Sodium Phosphate Dibasic, and D-Glucose. Some formulations may contain additional components. Use the table below as a quick reference for identifying the one...

pH 7.2

OmniPur® Imidazole | CAS 288-32-4 | Calbiochem | 500 GM

Product Brand: Analytical Density (g/cm3): 1.01 Molecular weight: 40 Molecular formula: NaOH UN Number: UN1824

EDTA is commonly used in biological and electrophoresis buffer systems. Store at room temperature. Protect from moisture. Irritant. Causes irritation to eyes, skin and mucous membranes. Avoid breathing dust. Do not take internally. Wash thoroughly after handling. See Material Safety Data Sheet for...

Chemical name: Buffer solution pH 10.0 (20°C) Density (g/cm3): 1.01 Chemical purity: =99.7% UN Number:

Manganese Chloride is used for dC and dG tailing of DNA.

OmniPur™ 25X TAE BUFFER-DRYMIX

This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. 10X Tris-Borate EDTA (TBE) consists of 0.9 M Tris-Borate, 0.01 M EDTA at a pH of 8.3. Meticulously prepared using ultra pure reagents...

Our complete range of patented buffer solutions provide pH stability of up to five years. High buffering capacity provides rapid and stable calibration.