Vials, Sample

In Lab File® Carton Of “200” borosilicate glass, with marking area and size 13-425 screw cap; cap has butadiene-styrene rubber liner Capacity: 4 mL ; height x diameter: 48 x 15 mm In Wheaton Lab File carton containing two pull-out drawers.

Economically priced Clear and amber vials made from borosilicate glass Vials and screw caps packaged separately Choice of screw cap liners for aqueous samples

Application EPA vials has been used during solid phase microextraction (SPME) of odors in drinking water for analysis by GC/MS. General description Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows: 1. Wash containers in hot water using laboratory...

Flint glass, with slight shoulder Tight-fitting polyethylene cap, with thumb tab, can be removed and applied easily with same hand in which vial is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays that can be pulled out as drawers.

Clear Screw Thread Vials offer maximum visibility. These general purpose glass Vials are made of Type I Borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. Purchase closures separately.

Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for lyophilization and...

Mouth OD 28.5mm Use with WHEATON tamper evident safety cap Large labeling surface for easy product identification Manufactured from WHEATON 900 soda-lime amber glass that conforms to USP Type III requirements Use the 0913V96 Crimper to secure the tamper-evident safety caps (1220Q54 or 1220Q55) to...

Clear Borosilicate Sample Vials offer maximum visibility. Type I borosilicate glass assures the contents integrity. Most vial sizes packaged in blue corrugate boxes to reduce carbon dust. Green Thermoset F217 & Teflon® Caps.

Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10 series...

Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows: 1. Wash containers in hot water using laboratory grade non-phosphate detergent 2. Rinse three times with copious amounts of tap water to remove detergent 3. Rinse three times with ASTM Type I...

Clear Vial with solid-top black phenolic 14B rubber-lined caps attached The aqueous series consists of clear and amber glass vials with solid-top closures. Featured is the black phenolic cap with a 14B white rubber liner. Both cap and liner are autoclavable and have substantial resistance to...

30 ML VIAL, 22-400, CLR, NO CAP,LAB FILE

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. Amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to...

Thermo Scientific™ Depyrogenated Sterile Empty Vials are offered in capacities ranging from 1 to 100mL. Certificate of Sterility & Pyrogen Test included with each lot. Sterile vials are Type I borosilicate, assembled with butyl stoppers and aluminum seals. Type 1 Borosilicate glass...

Vials and Phenolic Caps with PTFE-Faced / White Rubber Liners Manufactured from amber 203 borosilicate glass Closed top black phenolic closures attached Closures with PTFE-faced / white rubber liners or white rubber liners Vials packaged in corrugated trays with partitions

Economically priced Made from borosilicate glass Case of 200

The ELITE Packaging Vials™ were designed for rigorous freeze-thaw and shipping conditions. The unique manufacturing design of the ELITE Packaging Vials creates more closure to vial surface contact for an absolute seal. This results in exceptional closure seal performance exceeding DOT...

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make contact...

Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Screw caps available separately

Low profile for greater stability, wide mouth for ease of sampling, these Clear Compound Vials are excellent for small quantities of compounds. The Lab-Pak carton includes a shrink wrapped tray of 144 Vials and a bag of 144 Green Thermoset F217 PTFE lined caps (not assembled). Green thermoset...

RIA vials are generally used in radioimmunoassay - a scientific method used to test antigens without the need to use a bioassay. The polypropylene vials are translucent and can withstand 3000 RCF during centrifugation. Can be used with common acids, alkalies, and solvents at room temperature....

TriForest Polycarbonate Serum Vials are ideal for sampling, storage, production and packaging of steam sterilized biologicals. They are ideal for leak-proof shipment of reagents and buffer solutions. All vials and caps have lot number traceability. These shatterproof, resistant containers are useful...

Kimble Article No. 60910C-1, Sample Vials, Screw Thread, Clear N-51A Borosilicate Glass, with Polyvinyl-Faced Pulp Lined Closure (Not Attached)