Serological Pipets

Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Sterile or non-sterile Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Bulb capacity 85mL. Black natural rubber. For gas sampling or for pumping gas through apparatus. Two rubber valves.

For the general transfer of fluids such as blood and urine Accuracy 10% Polyethylene construction Minimize the risk of cross contamination Integral, self-contained pipets eliminate the problems of attaching rubber bulbs and suction devices or changing pipet tips. Pipets will not tear biohazard bags....

Thumb wheel rotated to raise or lower plunger Polypropylene housing, with silicone rubber seals Syringe-type, for easy, one-hand control of filling and delivery from conventional pipets. For rapid delivery, plunger can be depressed directly. Tapered-plastic chuck grips mouth end of pipet. Can be...

Longer lightweight handle reduces arm strain Efficient pump for extended operation Three speed settings for precise control The Portable Pipet-Aid XL has a longer handle to reduce arm strain during pipetting. Its ergonomic design includes an adjustable sliding hand rest and a removable stand that...

Safe, convenient laboratory pipetting Pipets over 2,000 times without recharging Lightweight (<10 oz.), compact (<7 in.) and totally portable with power built into the handle filtered, fail-safe nosepiece provides positive protection for electronic components and prevents cross-contamination...<>

Non-toxic and chemically inert to biological fluids and most acids Can be heat sealed to use for liquid storage or transport Pipets can be frozen in liquid nitrogen Non-slippery - easy to grip with gloves Temperature range: -196°C to 90°C Can be gas (EtO) sterilized Produced from a custom...

Sterile or non-sterile Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Argos Technologies Transfer Pipets are manufactured from a custom grade low-density polyethylene (LDPE), making them the perfect substitute for breakable glass pipettes. These single unit pipets are disposable, therefore eliminating the risk of cross contamination without compromising the quality...

63A53WT / 25A00A766 Capacity: 2 mL Material: Borosilicate OD: 7 mm Tip ID: 1.6 mm Overall Length: 5.75 inches Tip Length: 2.25 inches Body Length: 3.5 inches            883350-0575 /   25A00A767 Capacity: 2 mL Material: Borosilicate OD: 7  mm Tip ID:...

These PYREX® volumetric pipets are manufactured to Class A capacity tolerances as indicated by ASTM E-969. The rugged construction, colored enamel graduations and markings provide a pipet which will give good life and service.

Glass ungraduated Approximately 4 mL capacity Pasteur-type pipets for one time use in the transfer of small volumes. These pipets do not feature a constriction. Useful in automatic clinical analyzer techniques. Packaged in dispenser boxes containing 100 pipets and one 4 mL rubber bulb.

Syringe-type for easy, one-handed control of filling and delivery from conventional pipets Knurled thumbwheel is rotated to raise or lower plunger by rack-and-pinion drive For rapid delivery, plunger can be pressed directly Tapered socket grips mouth end of pipet Quick release lever on side of...

For use with Pasteur pipettes, small pipettes and medicine droppers.

This bulb-type safety pipette filler is designed for efficient one-hand operation. Made from natural rubber for better memory and resistance to chemical attack. Its three glass valves control the evacuation of air, liquid uptake and liquid dispensing. Expel air from the bulb by squeezing the...

Variable fill and dispense speeds Lighter, more compact than competing units Easy to operate Nine independently controlled fill and empty speed range options for liquids of varying viscosities. Fill and dispense both have fast, medium and slow settings. Can be used with glass and plastic serological...

Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

Calibrated To Deliver (TD) Color coded Designed from ASTM Specification E969, Class A requirements 75 and 200mL sizes are designed from ASTM E542 Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

These PYREX® volumetric pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-969. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. These precision PYREX® volumetric pipets are...

Material: Low Density Polyethylene (LDPE)

The disposable Transfertube is an innovative device for transferring and coring liquid and solid samples with one hand. The large aperture is particularly useful for working with particulates and suspensions. Disposable transferring reduces the risk of cross contamination associated with re-used...

These PYREX® volumetric pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-969. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Color-coded markings enameled onto the glass. Now...

For use with all sizes of pipets and syringes. The neck is heavy walled which allows for increased grip. Natural red rubber. The 150mL size has reinforcing ribs.