Filters, Manifolds

Designed for general qualitative laboratory work Fast filtering speed; 25um particle retention Low retentivity, which retains coarse or gelatinous precipitates such as aluminum hydroxide, cobalt carbonate, mercury iodide and magnesium hydroxide Creped surface; thickness approximately 0.23 mm; 24...

Depth filtration glass micro fiber 934-AH® - Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard Methods 2540D and EPA Method 160.2). Also widely used in cell harvesting...

Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers...

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a...

Longer lightweight handle reduces arm strain Efficient pump for extended operation Three speed settings for precise control The Portable Pipet-Aid XL has a longer handle to reduce arm strain during pipetting. Its ergonomic design includes an adjustable sliding hand rest and a removable stand that...

Quick and efficient filtration of samples and all kind of solutions, solvents or gases        Housing injected in Polypropylene or Acrylic        Multifunctional Syringe Filters: equipped with luer-lock or luer-slip male...

ValuSep® Solid Phase Extraction (SPE) filters for EPA Method 1664A are designed to provide high recovery and low blank values in Horizon® SPE-DEX® and SPE manifold EPA Method 1664A applications. Each SPE filter consists of glass fibers which have been chemically modified so they retain...

Non-sterile, sample prep membrane filters 7 membrane types Female Luer-Lock inlet, male Luer-slip outlet Solvent resistant polypropylene housings PES, GMF, Polypropylene and Cellulose Acetate membranes are certified for Ion Chromatography The polypropylene housings with all Target syringe filters...

mdi PTFE membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum throughput...

Ahlstrom’s qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still...

Xenomax® Pre-Weighed TSS Filters are pre-washed, predried, pre-desiccated, and pre-weighed in accordance with Standard Methods 2540 D and are ready to use out of the box. To significantly speed up TSS analysis, simply filter your sample, dry the filter, and record its final weight. These filters...

Safe, convenient laboratory pipetting Pipets over 2,000 times without recharging Lightweight (<10 oz.), compact (<7 in.) and totally portable with power built into the handle filtered, fail-safe nosepiece provides positive protection for electronic components and prevents cross-contamination...<>

mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and maximum...

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene...

mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought. These filters are ethylene...

•  3mm, 13mm, 25mm, 50mm •  0.10µm to 1.20µm •  Minimal sample hold-up •  High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters and 50mm...

Ahlstrom's qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still...

Ahlstrom's qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still...

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation counting and...

Designed for general qualitative laboratory work Medium filtering speed; 6 µm particle retention Medium retentivity, which retains medium crystalline precipitates such as aluminum phosphates, barium carbonate and lead chromate Thickness approximately 0.15 mm 6 µm pore size

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and hydrophobic interactions similar to...

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are...

Depth filtration glass micro fiber GRADE E - Fine porosity, fast flow rate, with a 1.3 µm size particle retention. This material is an economical media for suspended particle analysis in water, cell harvesting, pre-filtration and air monitoring applications. Binderless borosilicate glass...

Designed for very fine precipitates Slow filtering speed; 1 µm particle retention High retentivity, which retains very fine crystalline precipitates such as cuprous oxide, lead sulfate, barium sulfate and manganese carbonate Thickness approximately 0.20 mm, 1.5 µm pore size