Cylinders

Graduated Measuring Cylinders Translucent polypropylene (PP) Molded graduations - mL Wide opening with a tapered pour spout Break-resistant and chemically resistant to most acids, bases and common solvents Continuous working environment up to 100°C Autoclavable at 121°C for 20 minutes These...

Featuring a reinforced bead and pouring lip, these Class B borosilicate glass graduated cylinders comply with ASTM E 1272. The 5mL size has a funnel top. Calibrated "to deliver" (TD) at 20°C and suitable for general laboratory use. Reference No. ASTM E 1272

KIMAX® cylinder with a durable blue ceramic enamel scale "TC" appears on each cylinder and indicates the cylinder is calibrated to contain A Standard Taper glass stopper is supplied Replacement stopper is 850100 Designed from ASTM Specification E1272, Style II, Class B...

Calibrated “to deliver” White scale Safety bumper Grade A cylinder features reverse metric scale and bumper. The “TD” (to deliver) appears on each cylinder and indicates it is calibrated to pour (dispense) and that the cylinder may be used repeatedly without drying.

Glass cloning cylinder for cloning or isolating individual cells. Place cylinder into bottom of flask or Petri dish to isolate individual or small group of cells. Disinfectant chambers to be used as described in the 1992 J.A.O.A.C. Hard Surface Carrier Test.

Economy molded polypropylene cylinder sets, consists of ml: 10, 50, 100, 250, 500, 1000.

Serialized and certified, single white metric scale Calibrated "to deliver" Class A certified Suitable for ISO 9000 Quality programs Permanently marked with an individual serial number Provides an easy way for a laboratory to meet QC/QA requirements. Supplied with a Certificate of...

Polypropylene (PP) and styrene acrylonitrile copolymer (SAN) graduated cylinders. Short form lowers center of gravity for increased stability Circular base Molded graduations for increased readability

These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding...

KIMAX® graduated cylinder with scales in both metric and U.S. customary units “TD” appears on each cylinder and indicates the cylinder is calibrated to deliver Sizes 8 fluid drams (25 mL approx.) and larger are designed from ASTM Specification E1094, Type 2 requirements (also NBS...

Printed cylinders, made of polypropylene. Cylinders feature permanently easy to read blue screened graduations that resist fading and scratching after repeated autoclaving. Meets stringent international quality criteria according to ISO 6706 standards. Tolerances according to DIN 12 680 TT, Class B....

Molded of chemically resistant polypropylene with improved clarity Graduations permanently molded on and will not fade after repeated autoclaving Meets stringent international quality criteria according to DIN 12680 standards

KIMAX graduate with scales in both metric and U.S. customary units. Calibrated to deliver. Sizes 8 fluid drams (25 ml approx.) and larger are designed from ASTM Specification E1094, Type 2 requirements (also NBS Handbook 44). Sizes 4 fluid drams (15 ml), and smaller do not meet ASTM E1094 nor NBS...

Polypropylene (PP) and Styrene Acrylonitrile Copolymer (SAN) graduated cylinders have ring molded graduations at major increments for excellent readability. Blue print models have overprint for added legibility. Class B per DIN 12681.

These polymethylpentene cylinders feature permanently molded graduations that will not fade after repeated autoclaving. Meets stringent international quality criteria according to ISO 6706 standards. Tolerances according to DIN 12 680 TT, Class B. Maximum temperature: PP 121°C, PMP 135°C.

Polypropylene (PP) and styrene acrylonitrile copolymer (SAN) graduated cylinders. Short form lowers center of gravity for increased stability. Circular base. Molded graduations for increased readability.

Nessler cylinders are used for comparison of color and turbidity between solutions or as reaction vessels. Made from borosilicate glass and calibrated to Class A standards. Include an optically plane bottom as well as markings for nominal stroke volume and halfway mark.

KimCote® plastic-coated, Class A cylinder is marked with a white,reverse,single metric scale. The cylinder is calibrated to deliver and has a hexagonal base flat ground for stability. SAFE-GARD® bumper is supplied. Designed from ASTM Specification E1272, Style 1, Class A requirements.

Our polypropylene one-piece measuring cylinders have raised graduations for easy readability. They are autoclavable and have excellent contact clarity. The hexagonal base provides excellent stability to the cylinder, and the tapered spout enables easy pouring of reagents. Stated tolerances are the...

Cylinders comply with ASTM E1272, Class A standards, batch certified. Double metric scale, calibrated to contain. Borosilicate glass cylinders with pour spouts feature heavy uniform wall tubing and strong, stable, hexagonal bases. All cylinders come with bumper guards.

Save valuable space and stabilize samples within the shipping container. Space-saving oblong shape and flat side panels allow bottles to be packed tightly into coolers. Thermo Scientific™ Wide-Mouth HDPE Oblong containers are an excellent general purpose sample container for liquid sampling...

Polypropylene (PP) and Styrene Acrylonitrile Copolymer (SAN) graduated cylinders have ring molded graduations at major increments for excellent readability. Blue print models have overprint for added legibility. Class B per DIN 12681.

Crystal Clear, autoclavable PMP (TPX) Cylinders feature excellent chemical resistance. Permanent graduations are molded in. Pentagon bases provide added stability. Chemically non-absorbent and cleaner than glass. No wetting and no meniscus. Manufactured per ISO standard 6706-1981 (E).

Borosilicate, with spout and hexagonal base Single graduations, with zero at bottom; calibrated "to deliver" The 10 mL size has flared top to facilitate filling Sizes 25 to 2,000 mL include Safe-Guard ® plastic bumpers Designed from ASTM Specification E 1272, Style 1, Class B...