Balance Weights

These lead weights can be coiled into a helix, spiral, cone or any irregular shape to stabilize vessels in a water bath. Flexible; versatile Coil around flasks, thread through handles or loop around bottle necks Coated with chemical resistant red Vikem® vinyl to protect glassware Available in...

Thomas Scientific Calibration Weights are solid construction and made with non-magnetic stainless steel. OIML E2 can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg. OIML...

There are nine hooked weights in this set. The weights are as follows: one 1000g cast-iron hooked weight, one 500g cast-iron hooked weight, two 200g brass hooked weights, one 100g brass hooked weight, one 50g brass hooked weight, two 20g brass hooked weights, and one 10g brass hooked weight. Comes...

Class 4 For calibration of semi-analytical balances and for student use. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent regulatory requirements. The Traceable Weight Certificate...

Class 2 Appropriate for calibrating high-precision top loading balances with a readability as low as 0.01 g to 0.001 g. Traceable Certificate The Traceable Certificate is designed for those laboratories and companies that require traceability but do not need to meet any stringent regulatory...

Weights are made of brass, with nickel plated surfaces. All weights are carefully tested and calibrated. Analytical Weight Box contains a total of 9 weights from 1 to 100 grams, in polished wooden box, with fractional weights, rider and forceps.

Storage: −20°C

Stainless steel polished finish Designed to meet ASTM E617-13 specifications ASTM Class 0 weight sets and individual weights are not individually marked with their weight value or individually serialized per ASTM E617-13 Nominal value marked on weights Serial numbers applied to case (weights may be...

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

This slotted weight set includes the following: One 500g brass slotted weight Two 200g brass slotted weight One 100g brass slotted weights One 50g brass slotted weight Two 20g brass slotted weights One 10g brass slotted weight One 50g hanger One weight rack PRODUCT WARNINGS WARNING: This product can...

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

Individually calibrated weights made of high quality stainless steel. Both sets come with a sturdy plastic storage block. Set of 9 includes 1 each of 5g, 10g, 50g, 100g, and 500g, plus 2 each of 20g and 200g weights. Set of 10 includes all of the previously mentions, plus 1 each 1000g weight.

Application Gel filtration markers are used in protein chromatography and gel filtration chromatography. Gel filtration markers have been used to study glucocorticoid-induced lymphocytolysis as a model system for apoptosis within the immune system. Gel filtration markers have also been used to...

The OHAUS 100 mg calibration weight is suitable for use with mechanical and electrical balances as well as scales. It is ideal for use in laboratories, educational purposes and industrial purposes.

The OHAUS 1 mg calibration weight is suitable for use with mechanical and electrical balances as well as scales. It is ideal for use in laboratories, educational purposes and industrial purposes.

ANSI/ASTM E617 Class 7 Weights 1 g and above are carefully manufactured of stainless Steel and are cylindrical in shape for easy gripping. Weights 1 g to 100 g are of one-piece construction and are adjusted during manufacture by removing material from the bottom of the weight. Weights 200 g through...

The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01 mg.

The OHAUS 100 grams calibration weight is suitable for use with mechanical and electrical balances as well as scales. It is ideal for use in laboratories, educational purposes and industrial purposes.

UltraClass The weight tolerance is equal to ANSI/ASTM E617 Class 0 and exceeds OIML R 111 Class E2. This class is used as a reference standard for calibrating other reference standards and weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.01...

Class 1 Can be used as a reference standard in calibrating other weights and is appropriate for calibrating high-precision analytical balances with a readability as low as 0.1 mg to 0.01 mg.

The OHAUS 2 mg calibration weight is suitable for use with mechanical and electrical balances as well as scales. It is ideal for use in laboratories, educational purposes and industrial purposes.

Storage: −20°C

To get all the accuracy your electronic balance and/or scale provides, you need to perform routine calibrations and verifications using precision calibration weights. Troemner's Stainless Steel Electronic Balance Calibration Weights are intended for this purpose. Weights are available in a...

For Thomas number 1109B10 Animal Balance, 1382F15, 1382F35 and 1382F65 Triple Beam Balances, to extend capacity to 2,610 grams Consisting of one 500 and two 1,000 gram weights (effective weight)