Koehler

Test Method Determines sediment content of crude oil and fuel oils by extraction with toluene. A test portion of the sample is placed in a refractory thimble. Toluene is gently boiled and its vapors condensed and allowed to drip into the sample funnel. The toluene washes out all of the crude oil or...

Test Method For flash point determinations of fuels, lubricating oils, liquids containing suspended solids and liquids that tend to form a surface film during testing. Pensky-Martens Closed Cup Flash Tester Conforms to ASTM D93 and related specifications Choice of electric or gas heating Determines...

Inversion Polarimeter Tubes Glass, approximately 9 mm i.d., with threaded, metal ferrule litharge-sealed to tube at each end Metal, cover-glass retaining caps, threaded to attach to ferrule Cap diameters closely controlled to ensure concentricity of tube with optical path in polarimeter Length of...

Thermostatically controlled coking furnace for five samples Conforms to ASTM D 524 and related specifications Microprocessor temperature control with digital display and over-temperature cut-off Reaches standard test temperature of 550°C rapidly and controls with ±1°C stability....

Meets ASTM D 217 specifications for stroke length and rate Equipped with a presetting electronic counter that automatically shuts off drive motor after any desired number of strokes up to 99,999 Threaded cup and cover

Thomas Nos. 1209Q14 – 1209Q16 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in conformance with D91, D96, D893, D1796, D4007 Thomas No. 1209Q17 Tube is 8" Marked in mL and can be used with our Oil Test Centrifuge with Long Cone Rotor in...

Long tube rotor assembly, 115 and 220 Volt fully automated bench top centrifuge with integrated heating system which accommodates a capacity of 4 tubes Short tube rotor assembly, 115 and 220 Volt fully automated bench top centrifuge with integrated heating system which accommodates a capacity of 4...

For collecting liquid samples from bottom or any intermediate level of tanks, tank cars, etc. For ASTM Standards D4057 (formerly D270), D6074 or D1265 specifications Of heavy, nickel-plated brass Consisting of a cylindrical chamber with orifice in the rounded bottom, a weighted plunger that seals...

Accessory for K39900 LPG Copper Strip Corrosion Test Water Bath. For final polishing of copper strips prior to testing. 150-grit 1 lb. package

Manual unit glass-covered dial, 114 mm diameter, reads from 0 to 400 in 0.1 mm divisions and has zero adjustment and reset Platform is 152 mm diameter, scribed to aid in centering of sample Cast-iron base has spirit level and leveling feet Release is simple leaf-spring type Overall height 508 mm....

Conforms to ASTM D56 and related specifications Features stepless variable heat control with reference dial for accurate repeat setting of temperature rate of rise per specifications. Precision machined cover mechanism simultaneously opens slide shutter and applies test flame to sample at the turn...

Standard temperature 60°F, subdivisions 0.1° API, length 380mm, thermometer scale °F 0-150 (designation L), 30 to 180 (designation M), 60 to 220 (designation H)

Copper Strip Corrosion Test Bomb Conforms to range of standards Precision-machined stainless steel bomb inserts in copper corrosion bath for testing aviation fuels and natural gasoline. Bomb withstands test pressure of 100 psi (689 kPa) per specifications. Threaded cap with O-ring gasket and knurled...

Control Bulb. Stainless steel, with IC thermocouple. Used with a thermocouple pyrometer to verify compliance of furnace with ASTM performance requirements. Accessory to be used with Ramsbottom Carbon Residue Apparatus.

16" 33 oz capactiy Polycarbonate Oil Thief Sampler with 3 Petcocks at 2", 4" and 8"

Thomas No. 1209P98 - Portable Heated Centrifuge For the determination of water and sediment of crude oil by centrifuge method during field custody transfers. This test method is considered the most practical method for field determination of sediment and water in conformance with D96. Thomas No....

Microprocessor temperature control has °C/°F switchable digital setpoint and display Conforms to NACE TM-01-72, ASTM D 665 and D 3603 specifications Accommodates six sample beakers Microprocessor temperature control with digital display and overtemperature protection Stirs sample-water...