Humboldt

1196Y59: Flexible stainless steel blade with straight edges and rounded ends. Blade is riveted into wooden handle. 4" long, straight-edge spatula, 3/4" x 4" (19mm x 102mm). 1196Y60: 6" long, straight-edge spatula, 7/8" x 6" (22mm x 152mm). 1196Y61: 6" long, straight-edge spatula, 1/2" x 6" (13mm x...

The Humboldt Mfg. Co extra long tong is suitable for use in research facilities and chemical laboratories while conducting experiments. It is made of high quality material which ensures long lasting usage.

Bituminous materials; ASTM D5; AASHTO T49, IP49; ASA Std., A37.1; Fed Spec. SS.R. 406C, Meth. 214.01, Standard hardened stainless steel needle. H-1280 and H-1300 feature 40-45mm exposed needle lengths; H-1290 features 50-55mm exposed needle length. Wt. 2.5g.

Bowl Vol./Water (oz/cu. in.): 3.3 (6.1), Length: 5" (114mm), Width: 2-1/2" (63mm), Depth: 1" (25.4mm), Overall Length: 9" (228mm).

1196Y21 & 1196Y22: Bowl Vol./Water (oz/cu. in.): 6.6 (12.2), Length: 5-1/2" (139mm), Width: 3" (76mm), Depth: 1-1/2" (38mm), Overall Length: 9.3" (236mm). 1196Y23 & 1196Y24: Bowl Vol./Water (oz/cu. in.): 29 (53), Length: 8" (203), Width: 5-1/2" (139mm), Depth: 2-1/2" (63mm), Overall Length: 13-1/2"...

Universal Penetrometers Direct-reading instrument for precision penetration measurements of bituminous materials, cement, petrolatum and waxes, as well as food, cosmetics and pharmaceutical products. Unit has 5" diameter indicator dial, graduated in 400 divisions of 0.1mm, corresponding to 40mm...

Sturdy Tripods featuring adjustable openings through the use of detachable rings.

The Water Bath supports the following standards: ASTM D6927, D5581, D4867 Water Bath with microprocessor-based temperature control for precise temperature control throughout the range. Similar to the H-1390 Waterbath, but does not include a magnetic circulator. It includes a stainless steel shelf,...

High temperature bunsen burner with adjustable control. Has fine-pitch threaded valve, 1-1/4 in. diameter and perforated monel and wire mesh heat intensifier. Die cast, zinc alloy, nickel plated octagonal base. For use with all gases. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column...

Food, Paste, Paints; U.S. Dept. of Agriculture; Aluminum. Hollow 90° Aluminum cone and tip, Wt. 35g.

This hand-operated centrifuge is ideal for rapid settling of suspended solids from small quantities of liquid in analytical or clinical procedures at speeds up to 2000 RPM. The hand crank and steel worm with bronze spiral gear is set at a 15 to 1 ratio. The long-sweep crank is detachable and...

Attaches to laboratory table tops up to 1-3/4" (45mm) thick. Cuts glass tubing up to 1-1/2" (38mm) diameter. Aluminum alloy casting with gray hammerloid finish. Hardened steel cutting wheel.

Removable sliding shelf is perforated to permit collection of gas samples in inverted gas bottles. Sloping sides permit nesting. The standard trough is stainless steel construction with reinforced wire edges and overflow tube. Dimensions are 7" x 10" x 4" deep (178mm x 254mm x 102mm).

Powder-coated with plated steel rod

The Humboldt, Enclosed Model, Riffle-type Sample Splitter supports the following standards: ASTM C702, ASTM D410, ASTM D3013, ASTM D3176, ASTM D3180, AASHTO T248 Humboldt, enclosed model with drawer pans, Riffle-type sample splitter can be used to divide or halve dry materials such as cement,...

1196Y11 & 1196Y12: Bowl Vol./Water (oz/cu. in.): 13.5 (24.4), Length: 6-3/4" (172mm), Width: 4" (102mm), Depth: 2-1/2" (64mm), Overall Length: 10" (254mm). 1196Y15 & 1196Y16: Bowl Vol./Water (oz/cu. in.): 20 (36.6), Length: 8-1/4" (210mm), Width: 5-1/4" (133mm), Depth: 3" (76mm), Overall Length:...

Low-form aluminum laboratory beakers with pour spout. One-piece construction eliminates breakage.

Handles dishes and other articles from 3 to 4-3/4" (75-120mm), Stainless Steel, 9-1/2" (241mm length).

Wire loop handle with wire bristles. Bristle length is 1-1/2"x 3/4"x 1/8" (38mm x 19mm x 3mm) and the overall dimension is 5-1/2" (140mm).

Measures feature convenient handle and graduations in milliliters and ounces on inside of cup.

Manufactured from heavy die-cast aluminum, this clamp is designed for clamping two pieces of apparatus into any of the three following positions: right angles, parallel, or vertically. The clamp will accommodate attachments up to 1/2"(13mm) in diameter.

Nickel crucibles constructed from pure heavy sheet nickel. They are suitable for fusions, including those with sodium peroxide, and are highly resistant to dilute alkalies. Flat-style nickel crucible covers with depression in center for centering on crucibles. Extension on one side for handle.

Center-flanged Pipe Stem Triangles protect glassware on hotplates and over burner flames.

The Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any...