Desco

Desco

Products (35)

Compare Tool

Select up to 3 products

  • STATIC SHIELD BAG, 1000 SERIES METAL-IN

    Metal-In Film Laminate 0.0028” thick (2.8 mil) Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)<10 nj discharge shielding energy limit test per ansi sd stm11.31 meets ansi sd s20.20 and ansi sd s541 requirements for esd shielding packaging...<>

  • Statshield Dissipative Chair Cover, Royal Blue

    Dissipative (1 x 106 to Converts non-ESD chairs to low charging, groundable chairs. Washable Polyester/Cotton Blend Extends lifespan of chairs by preventing dirt and contamination build up. Chair Back and Seat Connected to Drag Chain Allows chair to be grounded when on a conductive surface. Made In...

  • SCS Anti-Static Dissipative Paper

    The SCS dissipative paper in white color, measures 8.5 Inch x 11 Inch. It is mainly used to control static discharge build up, thereby protecting ESD sensitive electronic devices. It is available as 500 sheets per ream.

  • Reztore Surface & Mat 1qt Spray Cleaner

    1 Quart Trigger Spray Bottle of Liquid Spray on and wipe clean to remove dust, grease, grime, fingerprints, and solder flux and other contaminants from ESD mats and other surfaces without degrading the surface's ability to drain charges. Does Not Contain Silicone or Other Substances That Will Leave...

  • SCS Dual-Wire Metal Wrist Band

    The SCS MAGSNAP 360™ metal wristband ensures electrical connection of people and other conductors to ground connection, within ESD protected area. It is made of high quality material which ensures durability and long lasting usage. Magnetic connection between wristband and coil cord Dual wire metal...

  • Trustat® Heel Grounder w/ Cup, Rubber, 18" Conductive Ribbon

    • One Size Fits All Adjustable Heel Grounder • Velstretch hook and loop fastening system • Non-marring Interior Material • 1 Megohm Resistor • 18 Inch Sewn-in Tab • Made in the United States of America

  • Quick Braid Desoldering Braid 0.075" x 100'

    Used in the rework and repair of printed circuit boards, computers, cell phones, or other electronics Easily removes solder from components or pads on a circuit board Concentrated fine copper braiding utilizes less length of wick for each desoldering application Made of clean, oxide-free copper...

  • SCS Dual-Wire Coil Cord

    The SCS MAGSNAP 360™ dual-wire coil cord with 3.5 mm right angle phono plug connector, offers static discharge shielding for ESD sensitive electronic devices. It is made of sturdy material, which ensures durability and long lasting usage.

  • 5410 Static Dissipative Sheet Protector Standard 8.5 inch x 11 inch

    Static Dissipative Sheet Protectors are made from durable static dissipative polypropylene plastic. Ink from photo copies will not stick to it. A thinner (2 mm) sheet allows for more documents to be placed into a binder. The embossed pattern on the sheet protector helps to reduce glare. Each sheet...

  • SCS Wescorp Antistatic Cellulose Tape

    The SCS antistatic cellulose tape in clear/yellow color, measures 3/4 Inch x 216 Feet, is mainly used for ESD sensitive electronic devices. This low charging tape with plastic core and rubber adhesive, offers surface resistance of 1 x 108 Ohms to 1 x 1011 Ohms.

  • ESD MagSnap 360™ Dual-Wire Metal Expansion Wristband, with 6' Coil Cord

    Magnetic Connection Between Wrist Band and Coil Cord Eliminates intermittent failures, extends lifespan, and maintains a 1-5 pound perpendicular breakaway force. 360° Rotation Between Wrist Band and Coil Cord Promotes comfort, freedom of motion, and reduced strain on the operator’s wrist....

  • SCS Wrist Strap with Dual 4 mm Snaps

    The SCS adjustable wrist strap with dual 4 mm snaps, ensures electrical connection of people and other conductors to ground connection, within ESD protected area. It is made of high quality material which ensures durability and long lasting usage.

  • 3M Ionized Air Gun 980, 120V

    The 3M Ionized Air Gun 980 Is An Excellent Tool For Blowing Particulate Contamination Off Of Any Surface. It Releases A Balanced Stream Of Compressed Ionized Air That Neutralizes The Static Charge That Can Hold Particulates To A Surface.

  • Foot Grounder, Heel, Lime Green Strap, 1 Meg Resistor

    Heel Grounder Converts non-ESD footwear to footwear that will provide a path-to-ground and will not generate a charge. Tab to Cup Resistance: 1 x 106 to < 1 x 107 ohms at 100 volts Meets the ANSI/ESD S20.20 required limit tested per ESD SP9.2 & ESD TR53 High Visibility Neon Lime Green...

  • Black Coil Cord, 4mm, 12ft

    12 Foot (24 Inches Of Coils) Coil Cord Used with a wristband to create a path-to-ground for an operator with resistance Strain Relief Tests Over 1 Million Cycles; 62 Times The Minimum Requirement Per ESD S1.1 Eliminates intermittent failures that occur with less durable cords and extends the...

  • BAG, OPEN TOP, STATSHIELD, METAL-IN 12IN x 18IN, 100 EA/PACK

    Metal-In Film Laminate 0.0030” thick (3 mil) Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)<20 nj energy limit test per ansi sd stm11.31 meets ansi sd s20.20 and ansi sd s541 requirements for esd shielding packaging inside and outside an esd...<>

  • Bag, Statfree, Clear 10x12

    ESD Statfree sheet protector choice where shielding is not required. For packaging ESD sensitive item or non-ESD items in ESD protected area Static dissipative Superior choice over blue and pink poly bags Intrinsically antistatic, low charging properties Bag contents will not electrostatically...

  • Static Shield Bag,  Clean Series Metal-In

    ESD safe packaging designed for use in cleanroom areas where surface particulate is of concern Tested in accordance with IEST-STD-CC1246E Metal-In Film Laminate 0.0028” thick (2.8 mil) Protects ESD sensitive contents from electrostatic fields and electrostatic discharges (ESD)<10 nj...<>

  • Area Warning Poster, 17" x 22"

    English 17” x 22” ESD Area Warning Poster (Pack of 5) Indicates the existence of an ESD Protected Area to personnel prior to entry into the Protected Area. Poster Paper with Varnished Semi-Gloss Overcoat Designed for long term use in an electronics production environment. Made in the...

  • SCS Attention Label

    The SCS pre-printed attention label measuring 2 Inch x 2 Inch, is a ESD susceptibility symbol in English language. This adhesive, reusable label has yellow background with black legend, which makes it highly visible and easy to read.

  • Desiccant Pak, 1 Unit, Pail

    Use Desiccant Pack in Moisture Barrier Bags to absorb moisture Reusable - Desiccant packs can be reactivated by oven drying MIL-D-3464 Desiccant Regeneration Instructions Lead-free RoHS compliant 300 packs per pail Made in the United States of America Specifications 13844 Desiccant packs meet...

Compare Tool

Select up to 3 products