Bellco Glass

Angles Harvest Pipe Assembly 3L. Stainless steel 12mm harvesting pipe with 90 degree angle for sampling contents in 3L – 15L bioreactor vessels. Fits 18mm port on 3L metric headplate. Size: 11 7/16”

Heating circulator +20…+100 °C; 2 kW heater; 5L plastic tank, internal applications only

Manufactured from Type 1 Class A Borosilicate Glass. Ideal for use to prepare solutions, and to contain. Flat bottom bulb with a elongated neck with permanent graduation line and marking area. Volumetric flasks are calibrated for a particular temperature usually 20 degree Celsius. Specifications:...

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with...

Foam Probe Fitting 1/2" Specifications: 316l Stainless Steel Headplate Port: 1/2" NPT Probe Diam: 1/2"

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular work...

The Bellco Process Controlled Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to...

Heating circulator +20…+300 °C; 3 kW heater; 12L SS tank w lid, drain valve, integrated cooling coil

Centrifuge tubes are precision molded from premium-grade, chemically inert plastics. Accurate, easy-to-read graduations re molded-in at 0.1 mL intervals from 0-1 mL and at 0.5 mL intervals from 1-5 mL and every 1 mL from 5-15 mL. The outside diameter is 17 mm and the overall length is 120 mm....

The slow speed conversion kits adapt any modular or fixed frame cell production roller apparatus to operate between either the speeds of 0.10 and 2.0 rpm (7630-60666) or the speeds of .085-1.7 rpm (7630-70777).

Heating circulator +20…+100 °C; 2 kW heater; 19L plastic tank

The Bellco Top Drive Roller Apparatus has been designed for production of animal cells, viruses and cell products. The unit accommodates 86 bottle positions. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a...

Manufactured from medium wall Borosilicate Glass Type 1 Class A, with permanent graduations designed for DNA/RNA protocols. Includes high temperature red PBT cap with PTFE faced silicone liner. Replacement cap 5639-90045 Specifications: Type 1 Class A Borosilicate Glass Size: 35x225mm

Reducing Couplers - Single Barbed Clear poly-carbonate singled barbed tube fitting. Tubing use with PVC polyurethane with a hardness of shore A 45-90. These poly-carbonate single barbed fitting are transparent so you can see that is flowing through your line. Single barbed fitting minimize leaks by...

Chiller, 1.2kW cooling power, -20…+40 °C, 1 bar pump

Cellector Key Only Specifications: All Stainless Steel Construction Available With 85ml Or 130ml Pans

The Bellco Digital Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm...

mHandle Specifications : Polypropylene With Max Continuous Use Temperature Of 220F Case Qty:1  

6-well microplates are sterile and treated in individually packed units. One-way fitting lids reduce excess evaporation and raised rings inside help to minimize condensation. Treated plates are gamma-irradiated and tissue-culture treated to provide uniform and compatible surfaces for cellular...

Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 250ml Sidearm cap: 32mm Od x oal : 85 x 140mm Center neck: 70mm

Will not rust or deteriorate in water baths or CO2 atmospheres. Manufactured from 303 stainless steel with electropolish finish. Specifications: Stainless Steel Material Each Opening Rack 1 1/16? (26.9mm) Tube Size: 25mm Spacing: 4x9 Holds 36 Tubes Dimensions: 10 9/16" X 4 3/4" X 3 15/16" Minimum...

Manufactured from Type 1 Class A Borosilicate Glass. These media storage bottles are chemically resistant ans stable. They are suitable for storage as well as for mixing and sampling. They are autoclavable and have white graduations and marking spot. On sizes 100-2000mL there is a full capacity...

DeLong culture flask without closure Stainless steel or kap-uts disposable closures purchased seperately Borosilicate glass Type 1, Class A Graduated to approximate volumes

Sparger Assembly for 6L Low Profile OHD Vessel. This fits through a 45mm sidearm. Designed for vertical side arm vessels. Specifications: Sparger Tube: 10 1/8" Long Material: Stainless Steel 20RA or Better 12mm Coarse Glass Frit (40-60µ) Gently Introduces Bubbles into Vessel