Bellco Glass

Heating circulator +20…+200 °C; 2 kW heater; 6L SS tank w lid, drain valve

Dissolved oxygen and PH electrodes are the eyes and ears for many biotechnology processes. High quality sensors are required for critical measurement and Hamilton sensors are some of the finest in the world. Bellco offers Hamilton gel-filled PH and stainless steel polarographic dissolved oxygen...

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses, and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with...

Manufactured from Type 1 Class A Borosilicate Glass. This bottle protects is contents up to 500nm or uv radiation. These bottles are specifically suitable for preparing light sensitive media and for storing substances for extended periods of time. The bottles graduated white with marking spot....

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the researcher a wide range of capabilities and the latest innovations in stirring technology....

Suitable for laboratory centrifuge applications and the separation of substances, Microcentrifuge tubes accommodate smaller volumes of samples. Tubes featured a tethered cap for quick and easy closure. Caplugs Evergreen microcentifuge tubes are precision molded in the USA. Molded-in tethered cap for...

Manufactured from virgin polystyrene. One piece construction, no seams at mouth -piece or tip end. Specifications: Material Virgin Polystyrene Size: 5ml Graduation Interval: .10mL Negative Graduations: 3ml Tip Id: 1.4-2.2mm Color: Blue Length: 11.57" Case Quantity: 375  

H/S Vertical Lift Impeller-15L Complete. CONSIST OF; 7764-75015 & 7764-76015. DIMENSIONS: (SHAFT); 5/8"OD X 20 3/4" LONG, (DISK); 3 3/4" OD. 316L SST

Heating circulator +20…+100 °C; 2 kW heater; 19L SS tank, internal applications only

The CellTrol II can be configured to accept a variety of analog probe signals from a cell culture vessel. Standard signals include pH, dissolved oxygen, temperature, weight, redox, and tachometer feedback from the agitator. A digital input signal from a level probe can be used for anti-foam addition...

The Bellco Digital Bottom Drive Roller Apparatus holds up to 50 (see specifications below) full size glass or plastic roller bottles (110 to 120 mm diameter and up to 510 mm in length). The unit features a brushless DC motor and controller that operate at bottle speeds ranging from 0.3 to 9.0 rpm...

Ideal for use in a variety of laboratory applications, this PTFE Sealing Film stands out for its durability and high resistance to chemicals and heat. With a thickness of 5 miL, it is designed to provide a secure seal on 96-well plates, ensuring the integrity of samples during storage or handling....

Drive stem assembly with 3/4”OD shaft for use with 7L marine and pitched blade impellers. Fits into 27 mm center port of 7L metric headplates. Multiple impellers may be assembled onto shaft as required. Specifications: Size: 7L

 Bellco Control System, Flat Bottom.  The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and 1965 Spinner Flasks. Sizes range from: 100 mL to 36 liters for 1965 spinners 100 to 3000 mL for 1967 spinner flasks...

Open (O) bottom 8-well strips are designed for membrane attachment. Our 8-well strips are compatible with all current plate readers, washers and pipetters. Every strip is precision-molded from polystyrene for minimal well-to-well variations and has uniformly low background readings. Suitable for...

Heating circulator +20…+100 °C; 1 kW heater; 19L plastic tank

PM Kit 7764-73000 The following preventive maintenance kit for 7764-73000 Drive Stem. Each kit includes an illustrated list for easy identification for parts.

The Bellco Rocker Platforms unit provide a gentle uniform rocking motion, required for even coverage of media over mono layer cell cultures, thereby maximizing cellular health and viability.  Viral suspensions introduced onto a mono layer of cells will yield higher virus titters. ...

Manufactured from medium wall Borosilicate Glass Type 1 Class A, with permanent graduations designed for DNA/RNA protocols. Includes high temperature red PBT cap with PTFE faced silicone liner. Replacement cap 5639-90045

The Bellco Digital Bench-top Roller Apparatus holds 10 glass or plastic roller bottles (110 to 120 mm diameter and up to 22.5 cm in length). The unit features a heavy-duty DC motor and solid-state electronics that operate at bottle speeds ranging from 0.3 to 10.0 rpm with the ability to select...

Adjusted Sample 1/8” Pipe Assembly Hi -Torque Over Head Drive Adapter is used in conjunction with the High-Torque OHD Motor to drive the impeller assembly for mixing within a vessel. Used with 100mm cap assembly. 316L SST design with polyester/SST bearing Includes two (2) 1/4” NPT female...

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring...

Enhance your device connectivity with this 3-meter RS232 interface cable. Designed for high-speed, reliable data transfer between various electronic devices, this cable is an essential tool for many scientific and technical applications. Its robust construction ensures optimal signal integrity and...

Manufactured from Type 1 Class A Borosilicate Glass. Includes long skirted black phenolic screw cap with white rubber liner. Specifications: Type 1 Class A Borosilicate Glass Screw Cap Included Size: 16 X 150mm Replacement Cap: 2029-00016 Case Quantity: 144