Bellco Glass

The Bellco Sci/ERA Cell Production Roller Apparatus has been designed for production of mammalian cells, viruses and cell products. Non-modular production units come in 45 and 50 bottle positions with over 80,000 cm 2 of surface area. All units feature a solid state control with heavy-duty DC motor...

The Bellco Top Drive Roller Apparatus has been designed for production of animal cells, viruses and cell products. The unit accommodates 86 bottle positions. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a...

Mettler Ingold DO Probe PTFE Specifications: Cathode Platinum Anode Silver Polarization 675mv Output 40 To 70na In Air At 25c Temperature 0 To 60c Sterilization To 130c Stability 2 Or Readout Per Week At Constant Pressure Temp 30c Linearity Better Than 03 Of Readout Pressure 60psi Maximum Connector...

The blanket has velcro closures for easy setup and a 6? power cable with IEC 60320 C14 plug. Specifications: Bioreactor Size: 15L Size Volt: 230v

The stainless steel screens are held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key. The screens are available in different mesh sizes and have a diameter of 37mm. Specifications: Stainless Steel Size: 74 Case Quantity: 5

Standard tray with pegs, *NOT* a stacking tray. Trays fit 7740 and 7743 series rocker & 7777 series 12v rocker. The "peg and grommet" design permits rapid platform changing. REPLACEMENT LINER: A502-193 SIZE: 30x30cm

Manufactured from Type 1 Class A Borosilicate Glass. Designed with deep side baffles for optimal agitation. Large bottom surface for easy access with Bellco large orifice pipette. Specifications: Type 1 Class A Borosilicate Glass Size: 4L Break Resistant Lip Dimensions: 205 X 360 Case Quantity: 2

Refrigerated/heating circulator -38…+100 °C; 1kW cooling @ 20 °C; 2 kW heater

The Hungate Anaerobic Tube was developed for growing and maintaining anaerobic bacteria and culture conditions. method of hungate utilizes syringe methods for anaerobic. Technique: Exclude oxygen by flushing the tube with the desired gas Add 4.5mL of pre-reduced anaerobic agar medium into tube Seal...

The Bellco Cell Production Roller Apparatus has been designed for production of animal cells, viruses, and cell products. Modular units are available from 5 to 45 bottle positions and allow easy expansion with modular add-on decks. Non-modular production units come in 45 and 50 bottle positions with...

Pitch blade impeller with right hand oriented blades 2". Assemble one or more impellers onto 3L drive shaft for mammalian cell culture. Specifications: 2" OD 316L SST Electropolish Finish Ra 32 For 3L Systems With Stainless Steel Set Screw For1/2" Shafts

Chiller, 7kW cooling power, -20…+40 °C, 6 bar pump

Water-cooled Chiller, 2.5kW cooling power, -20…+40 °C, 6 bar pump

Small footprint refrigerated/heating circulator -40…+150 °C; 470W cooling @ 20 °C; 2 kW heater

The Bellco Top Drive Roller Apparatus has been designed for production of animal cells, viruses and cell products. The unit accommodates 86 bottle positions. Rollers have a key design to eliminate slipping and are easily removable for servicing of bearings. Rollers are formulated from a...

Manufactured from Type 1, Class A, Borosilicate glass and ideal for media storage and mixing Long-skirted screw cap protects flask contents from contamination

Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Specifications: Size: 11mm Color: Green Septa: Clear Ptfe Or Red Rubber Case Quantity: 1000

Spring clamp for Erlenmeyer Flaskss, 50 mL (requires 8970620)

This option is used for converting: 7630-75000,7630-75012 7630-00509, 7630-00510, 7630-75220, 7630-75222, 7630-22509 & 7630-22510 five position roller apparatus to all positions drive. This option is not required for use with glass bottles but is desirable for use with plastic disposable...

These beakers are useful for general laboratory procedures and are autoclaveable. They have blue graduations to aid in viewing and dispensing liquids. Specifications: Material: Polypropylene Size: 50ml Dimensions: 40x60mm Case Quantity: 12  

Manufactured from virgin polystyrene. One piece construction, no seams at mouth -piece or tip end. Specifications: Material Virgin Polystyrene Size: 1ml Graduation Interval: 1ml Negative Graduations: 3ml Tip Id: 13-18mm Color: Yellow Length : 1067l Case Quantity: 1000  

Aluma Seal II Film are 1.5mil soft permeable aluminum foil with medical grade adhesive. It eliminates the need for heat sealing devices or mats during thermal cycling. Aluma Seal II has less of a tendency to roll back when removing the backing paper and conforms well to the plate during application....

Offering an imperative line of defence in the laboratory setting, this four-layer PP acticarbon non-woven lab protection mask ensures optimal safety from potential contaminants. The mask is constructed from durable polypropylene and activated carbon non-woven fabric, providing excellent filtration...

High grade plastic test tube rack, up to +100 °C, for 21 tubes 30 mm dia.