Flasks

Specialty Flasks, Flasks

Compare Tool

Select up to 3 products

All Products

Flasks Specialty Flasks

1 - 32 of 141
Sort
View
Show
  • Iodine Flasks

    Corning

    For the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper

  • Stainless Steel McCarter Reaction Clamps

    Wilmad LabGlass

    Used to connect two pieces of glass with flat flanges of the same diameter, these stainless steel horseshoe-shaped clamps are uniquely designed. Adjustable tension springs that secure even pressure over the flange area, may be slid on or off easily - thus facilitating assembly and disassembly of…

  • Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus preventing…

  • KIMAX Sugar Flasks

    Kimble

    Kohlrausch, Class A Borosilicate glass Calibrated to contain 20°C Mouth enlarged for easier introduction of sample Meet NBS requirements

  • SYNTHWARE Transfer/Storage Flasks

    Kemtech America

    SYNTHWARE transfer/storage flask for long term storage of deoxygenated solvent. Recovery of solvent is done thru the valve body using a cannula or syringe.

  • VITLAB, PFA Round Bottom Flasks

    BrandTech®

    These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…

  • SYNTHWARE Schlenk Storage Tubes with High Vacuum Valves

    Kemtech America

    SYNTHWARE Schlenk storage tube with a high vacuum valve. The valve has a PTFE O-ring at the tip and a PTFE wiper to protect the O-rings on the shaft. Valve is used to control liquid or gas flow into the vessel.

  • Cylindrical Jacketed Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These cylindrical borosilicate glass reaction vessels are jacketed with 1/2" hose connections. They have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. NOTE: Use LG-7316 clamps.

  • SYNTHWARE Modified Schlenk Flasks with Glass Stopcocks

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and 2mm bore glass stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

  • SYNTHWARE Modified Schlenk Flasks with High Vacuum Valves

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 0-4 mm high vacuum valve in the side arm. The valve has a PTFE o-ring at the tip. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate…

  • SYNTHWARE Round Bottom Two Neck Reaction Flasks with Glass Stopcock

    Kemtech America

    SYNTHWARE round bottom two neck reaction flask with standard taper outer joints and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • 4 Neck Molded Reaction Vessel Covers

    Wilmad LabGlass

    These borosilicate glass 4-neck reaction vessel lids/covers have a contact surface that is finely ground to provide a tight seal. Featuring a flat flange, these pressed lids have a center neck and three side necks with outer Standard Taper joints. Use LG-7316 clamps. NOTE: LG-8081 for use with…

  • SYNTHWARE Modified Schlenk Flasks with Teflon® Stopcocks

    Kemtech America

    SYNTHWARE modified Schlenk flask with a standard taper outer joint and a 2mm bore PTFE stopcock in side arm. The Kjeldahl shape permits easy transfer of liquids and solids. The lower portion of the flasks fits standard heating mantles to facilitate heating and stirring.

  • Reaction Assembly, Spherical Flask, 12L thru 72L

    Ace Glass

    Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.

  • SYNTHWARE Storage Flasks with High Vacuum Valve

    Kemtech America

    SYNTHWARE storage flask with high vacuum valve and side arm. Valve has a PTFE o-ring at the tip and PTFE wiper to protect the Viton o-ring on the shaft.

  • Overflow Measuring Flasks

    WTW

    Overflow measuring flasks are a simple and very precise way to conform to fixed volume instructions. They are available in different sizes for different measuring ranges with the respective sample volumes.

  • SYNTHWARE Storage Flasks with Outer Joints

    Kemtech America

    SYNTHWARE storage flask with standard taper outer joint and high vacuum valve. Valve has a PTFE o-ring at the tip. Valve is used to control liquid or gas flow into the flask.

  • Conical Flange Vessel Clamp

    Wilmad LabGlass

    This clamp is designed for reaction vessels/kettles with a conical flange. The top clamp is easily removed without disturbing the cover or body of reaction flask. Disassemble by loosening nuts. Includes extension rod for clamping to a laboratory stand. NOTE: Use with LG-8010 to LG-8050 vessels…

  • Cylindrical Reaction Vessel, Indented, Jacketed, O-Ring Flange

    Wilmad LabGlass

    Our reaction vessel with indentations jacketed with 1/2" hose connectors.

  • Jacketed Cylindrical Reaction Vessels with Flat Flange

    Wilmad LabGlass

    These jacketed, cylindrical borosilicate glass reaction vessels are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. There is a gently sloping contour at junction of side wall and bottom, thus…

  • Jacketed Indented Cylindrical Reaction Vessel with Flat Flange

    Wilmad LabGlass

    These jacketed, cylindrical borosilicate glass reaction vessels have four indentations for improved stirring. They are without constriction at the top and have a flat bottom. They feature sturdy walls and a tooled flat flange with a surface ground to assure a tight seal. Jacket has 1/2" hose…

  • Disposable Side-arm Assembly

    Corning

    Disposable Side-Arm Assembly For 500ml disposable spinner flask,1/4 id c-flex, mpc, sterile, case of 2.

  • SYNTHWARE Reaction Tubes with Glass Stopcock

    Kemtech America

    SYNTHWARE cylindrical reaction tube with standard taper outer joint and 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • SYNTHWARE Round Bottom Reaction Flasks with High Vacuum Valve

    Kemtech America

    SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the flask while an inert gas purge is passed through the sidearm.

  • SYNTHWARE Storage Tubes with Outer Joints

    Kemtech America

    SYNTHWARE storage tube with standard taper outer joint and high vacuum valve. Valve has a PTFE o-ring at the tip. Valve is used to control liquid or gas flow into the vessel.

  • Multi-Neck Reaction Flask Tops

    Kimble

    Three-neck or four-neck flask top with a flat ground flange for use with cylindrical and spherical flasks having the same ID Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Adapter Connecting, Side Outlet, NO-AIR

    Ace Glass

    Used for converting a single neck round bottom flask to air-free or vacuum applications. Outlet can be either 2mm glass stopcock or a 0-3 inlet valve. Upper and lower joint sizes are the same size. Great for adapting flasks and other components for Schlenk lines.

  • Flask, Round Bottom, Indented Morton Type

    Ace Glass

    Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with

  • SYNTHWARE Reaction Tubes with High Vacuum Valve

    Kemtech America

    SYNTHWARE cylindrical reaction tube with a standard taper outer joint and a high vacuum valve sidearm. Useful for sample storage or simple reactions. Valve plug may be removed to sample from the tube while an inert gas purge is passed through the sidearm.

  • SYNTHWARE Round Bottom Reaction Flasks with Glass Stopcock

    Kemtech America

    SYNTHWARE round bottom single neck reaction flask with a standard taper outer joint and a 2mm bore glass stopcock sidearm. Useful for sample storage and simple reactions. The stopcock has a constant pressure retention device.

  • Cylindrical Reaction Vessels with O-Ring Flange

    Wilmad LabGlass

    These borosilicate glass cylindrical reaction vessels have a tooled flat flange with an O-ring groove for a greaseless seal. Suitable for vacuum operation. Wall thickness is uniform throughout flask. Note: Use LG-7316 clamps.

  • Flask, Reaction, Cylindrical, with Bottom Outlet, Jacketed

    Ace Glass

    Rugged cylindrical jacketed reaction flask with Duran, flat, ground flange and o-ring groove. Various bottom outlet options are available (see details below). For use with 6517 quick release clamp. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints or with…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.