Round bottom flask with single neck with standard taper joint and a 8mm side outlet with either a 2mm glass stopcock or a 0-3 inlet valve. Ideal for Schlenk lines and either NO-AIR or vacuum applications. Includes one 9096-32 septa for side arm.

Designed by Dr. H.R. Krouse, University of Calgary, for use in H2O18/H2O16 determination. Unique design eliminates the use of grease or breakseals in CO2 recovery. Water samples are introduced by pipet into bulb by removing PTFE plug. After reinstating plug, degassing of water and CO2 is…

Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…

1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…

Pear-shaped, single neck, heavy duty flask. Available with ground, polished and cap-seal joints. The cap-seal flasks are used in the Ace microscale chemistry product line and feature a 14/10 ground joint with external threads. Supplied with a holed cap

Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.

Complete reaction assembly available in 12L, 22L, 50L and 72L spherical flask capacities. Unit is complete with heating mantle and controls, mechanical stirrer and controls, pressure equalizing funnel and pilot plant condenser.

Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…

Spherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.

Large scale cylindrical pilot plant reactors providing portable, self-contained reaction system for research and production purposes. Systems available in 100L, 150L and 200L plain or jacketed capacities with a variety of bottom openings. Ask us to bui

Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. This style also has a side thermowell port to facilitate a thermometer or a temperature probe to measure flask temperature without losing the pressure integrity of the vess

KF style flange clamp for our 200mm (8 in), 300mm (12 in) and 400mm (16 in) kilo scale reactor vessels. The 200 & 300mm clamps are manufactured of black, phenolic resin while our 400mm clamp is black, powder coated aluminum. Purchase the clamp and appropriate gasket separately. We recommend the…

Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi

Similar to 9833-05 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and three 14/20 side necks. Code -35 includes our 7506-10 #25 Ace-Thred bushing used to secure a…

Large scale spherical pilot plant reactors providing self-contained reaction system for research and production purposes. Systems available in 50L, 72L, 100L and 200L capacities, with bottom outlet. Adjustable height top and bottom flask supports. Inte

Rugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…

Determines CO2 evolution to assess biodegradability by soil and sewerage micro-organisms. Shake flask fits standard laboratory shakers. #7 Ace-Thred side port with Nylon bushing and FETFE O-ring holds a glass septum adapter. Inner well has a capacity of 10 mL plus head space. Well is held securely…

One-piece, jacketed reactor with three 24/40 and two #7 Ace-Threds. Features a 0-10mm Zero Dead Space (ZDS) bottom valve and 28/15 ball joint jacket inlet/outlets. Complete unit, codes -05 and -10, include the glass reactor body, PTFE ZDS valve stem, #7 nylon bushings and FETFE o-rings throughout.…

Round bottom, heavy wall, pressure rated flask. All flasks come complete with a solid PTFE plug seal with front seal FETFE o-ring for better containment of product. Vessels are tested at 1.5x for a working pressure rating at 60PSI at 120°C. Flasks

Round bottom, indented Morton Type, three neck flask. All flasks have angled side necks. Available in heavy wall. Indents enhance agitation during stirring.

Flat bottom flask featuring a single, short neck with a standard taper outer joint.,/p>

All PTFE reactor body, component of our 6390 PTFE Filter Reactor product family.

Flat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.

Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…

Head with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps.…

Cylindrical, heavy wall reaction flask with extra thick flat, ground flange. Without constriction at top to facilitate introduction/removal of material and allow for ease of cleaning. Available in 1L to 4L capacities, flat bottom and round bottom, with

A complete, general purpose benchtop reactor. Self-supported with a 20 x 15in footprint, 33 in high. Reactor features a 100mm (4 in) head with (4) 24/40 joints, an allihn condenser, a pressure equalizing funnel, overhead glass stirring assembly with variable speed motor and controller, heating…

Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…

Pear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.

Used for converting a single neck round bottom flask to air-free or vacuum applications. Outlet can be either 2mm glass stopcock or a 0-3 inlet valve. Upper and lower joint sizes are the same size. Great for adapting flasks and other components for Schlenk lines.

Pear shaped flask with outer joints. Microscale version comes with two 14/10 outer ground joints externally threaded to allow an O-RING-CAP-SEAL type connection with mating inner joint. Supplied with holed caps, PTFE-faced septa and FETFE O-Rings. For