Portable Water Quality Test Kits
They are invaluable when measuring the pH levels of water, which measures the acidity and alkalinity of the water and is important for assessing if water is suitable for drinking, agricultural, or industrial processes. Monitor the chlorine levels to ensure all water is disinfected correctly and safe for consumption.
Some water quality test kits can also identify the presence of harmful bacteria, which are indicators of water contamination and potential health risks.
Portable water testing kits are available in multiple forms, including test strips, chemical reagent kits, and more. Suitable for different types of water sources, including drinking water, pool, or environmental monitoring applications.
-
Spectroquant® Iron Test Method: photometric
MilliporeSigmaPrecautionary Statement(s): P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302 + P352: IF ON SKIN: Wash with plenty of soap and water. P304 + P340: IF INHALED: Remove victim to…
-
-
-
The Lovibond® aluminum no. 1/no. 2 combi-pack tablet set is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Water hardness is caused almost entirely by calcium and magnesium ions. Other di- and trizalent metals have a similar effect, but usually are not present in high enough concentration in potable waters to cause problems. Hardness increases soap consumption in laundries and causes scale in boilers. …
-
Spectroquant® COD Cell Test
MilliporeSigmaAll necessary reagents for the analysis are contained in the cells Considerate packaging design protects the cells from fluctuation even in unfavorable environment Elimination of possible mistakes through barcode-system
-
Iron (Total & Ferrous) Vacu-vials Kit
CHEMetricsIron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…
-
UN Number: UN3316
-
Phosphate Vacu-vials® Kits
CHEMetricsPhosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are…
-
Ammonia Vacu-vials Kit, Range: 0-14.0 ppm
CHEMetricsLow-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…
-
Glycol CHEMets Kit
CHEMetricsEthylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…
-
Nitrite Sodium Kit
LaMotteThis kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO2
-
Hydrazine CHEMets Kit
CHEMetricsHydrazine is a powerful reducing agent that is used in various chemical processes and in boiler water as an oxygen scavenger. To control corrosion, residual hydrazine typically is maintained in the 0.05 to 0.1 mg/L range. Higher levels may be used to guard against corrosion when the boiler is out…
-
-
Test Kit
CHEMetricsThe CHEMetrics peracetic acid CHEMets kit and peracetic acid comparator are used to determine various levels of peracetic acid in liquids. These are easy to use and ensure accurate testing. Application: For the Analysis of Peracetic Acid
-
Chlorine Test Kit
LaMotteThis Chlorine test kit measures for Chlorine using the direct reading titrator method. Range/sensitivity is 0-10 ppm/0.2 ppm Cl. Applications: Drinking Water, Food and Beverage, Industrial Water Boiling and Cooling, Laundry and Sanitation, Water and Wastewater # Tests (# Rgts): 50 at 10…
-
Arium Consumables & Accessories
SartoriusConsumables & accessories for Sartorius Arium laboratory water systems. Arium® Smart Station flexible remote dispenser Ultrapure Water for benchtop or wall-mounted installation. The Arium® Smart Station is designed for flexible remote dispensing of ultrapure water directly at the…
-
pH Test Kits
LaMotteWide Range Octet Comparator Method Employ Octet Comparator having eight color standards in increments of 5.0 or 1.0 pH unit, as indicated in listings below Kits are offered covering ranges from pH 3.0-10.0 to pH 8.5-12.0 For each pH range, two kits are offered: one without and one…
-
Spectroquant® Fluoride Cell Test
MilliporeSigmaMethod: photometric 0.10 - 1.80 mg/l F? Spectroquant® HS Code: 3822 00 00 Storage Class (GHS): 10 - 13 Other liquids and solids Storage: Store at +15°C to +25°C
-
Protects water baths and other water systems against the growth of algae, bacteria, molds and biofilms. Just 2ml per liter of water adds a blue tint which will fade after about 3 months reminding you to change the water and add new conditioner. Protects pumps and thermostats and helps…
-
Detergent Test Kit
LaMotte4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm
-
Cadmium Test Kit
LaMotteOctet Comparator Method For determining cadmium in water using Dithizone method; commonly occurs from the deterioration of galvanized pipe Octet comparator has color standards representing 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0 ppm cadmium. For use only where organic matter is absent and…
-
-
Range: 0.5 to 14mg/L Parameter: Nitrate Method: 2,6 Dimethylphenole For use in test kits, colorimeters and spectrophotometers Case of 24 Manufacturer Part No: LOV-2420702
-
Sulfide Test Kits
LaMotte3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…
-
Nickel Test Kit
LaMotteOctet Comparator For detection of nickel in waste effluents and water supplies Employs dimethylglyoxime method Octet Comparator has color standards representing 0.5, 1.0, 2.0, 4.0, 5.0, 7.5, and 10.0 ppm nickel Sufficient for 20 tests
-
Nitrate CHEMets Kit, Range: 0-3.4 ppm
CHEMetricsNitrate is the most completely oxidized form of nitrogen. It is formed during the final stages of biological decomposition, either in wastewater treatment facilities or in natural water supplies. Low-level nitrate concentrations may be present in natural waters. However, a Maximum Contaminant Level…
-
-
Bromine CHEMets Kit
CHEMetricsBromine, a less volatile compound than chlorine, is used as a sanitizing agent in drinking water systems, swimming pools, and spas. The bromine test method employs the DPD chemistry. Potassium iodide is added to the sample before analysis. Bromine reacts with the iodide to liberate iodine. The…
-
AquaComparator Test Kit Line
LovibondLow Cost, Easy to use kits for testing a wide range of water quality Parameters Continuous gradient color disks provide accurate measurements—no need to “extrapolate” between discrete color blocks Rotate the color wheel to obtain a color match with the reacted sample and read your result…
-
Test Kit Components
LaMotteDirect Reading Titrator, Syringe Type For use in LaMotte field titration kits as well as in standard laboratory procedures such as dilutions and solution dispensing Plunger and barrel of propionate plastic; barrel has Luer slip tip Capacity 1 mL All-purpose…