Water Quality Test Kits

Compare Tool

Select up to 3 products

HomeAll Products

CHEMetrics Water Quality Water Quality Test Kits

1 - 32 of 119
Sort
View
Show

  • Dissolved Oxygen CHEMets® Kits

    CHEMetrics

    The level of dissolved oxygen in natural waters is often a direct indication of quality, since aquatic plants produce oxygen, while microorganisms generally consume it as they feed on pollutants. At low temperatures the solubility of oxygen is increased; during summer, saturation levels can be as…

  • Chlorine (Free & Total) CHEMets® Kits

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Detergents CHEMets Kit, Range: 0-3 ppm

    CHEMetrics

    Detergents can be introduced into the water supply by industry, soap manufacturers, and private households. Environmental analysts often include a determination of anionic detergents when assessing surface water pollution. The Methylene Blue Method References: USEPA Methods for…

  • Ammonia VACUettes Kit, Range: 0-30 & 30-300 ppm

    CHEMetrics

    Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, dilutor snapper cup, micro test tube, and instructions. Range: 0-30 & 30-300 ppm MDL: 5 ppm Method: Direct Nesslerization …

  • Chlorine (Free & Total) CHEMets Kit, Range: 0-400 & 0-2000 ppm

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Chlorine (Hypochlorite) CHEMets Kit, Range: 0-1.55%

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Ammonia VACUettes Kit, Range: 0-60 & 60-600 ppm

    CHEMetrics

    Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, dilutor snapper cup, micro test tube, and instructions. Range: 0-60 & 60-600 ppm MDL: 10 ppm Method: Direct Nesslerization …

  • Chlorine (Hypochlorite) CHEMets Kit, Range: 0-12.5%

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Ammonia CHEMets® Kits, Direct Nesslerization Method

    CHEMetrics

    Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…

  • Chlorine (Free & Total) CHEMets Kit, Range: 0-100 & 0-500 ppm

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Chlorine (Free & Total) CHEMets Kit, Range: 0-25 & 0-125 ppm

    CHEMetrics

    Because of its strong oxidizing properties, chlorine is an excellent biocide used to treat potable waters, municipal wastes, and swimming pools. When used to treat potable water, chlorine helps alleviate the adverse effects of iron, manganese, ammonia, and sulfide. The Maximum Residual Disinfectant…

  • Ammonia VACUettes Kit, Range: 0-1000 & 1000-10,000 ppm

    CHEMetrics

    Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Low and High Range Comparators, dilutor snapper cup, micro test tube, and instructions. Range: 0-1000 & 1000-10,000 ppm MDL: 100 ppm Method: Direct Nesslerization …

  • Aluminum Vacu-vials Kit

    CHEMetrics

    Aluminum forms a variety of minerals in the earth’s crust. Aluminum and its alloys have many uses: heat exchangers, construction materials, and aircraft parts. Alum (aluminum potassium sulfate) is used in water treatment to flocculate suspended particles but may raise the level of aluminum in…

  • Silica CHEMets® Kits

    CHEMetrics

    Silica (SiO2) is the oxide of silicon, the second most abundant element in the earth's crust. Silica is present as silicates in most natural waters. Typical concentrations lie between 1 and 30 mg/L. Higher concentrations may exist in brackish waters and brines. The silica content of…

  • Hydrogen Peroxide CHEMets® Kits, Ferric Thiocyanate Method

    CHEMetrics

    Hydrogen peroxide is a strong oxidizing agent with a variety of uses. Applications include the treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging. For the food and beverage industry, CHEMetrics Hydrogen Peroxide CHEMets® and…

  • Iron CHEMets Kit

    CHEMetrics

    Iron is present in nature in the form of its oxides, or in combination with silicon or sulfur. The soluble iron content of surface waters rarely exceeds 1 mg/L, while ground waters often contain higher concentrations. The National Secondary Drinking Water Standard for iron is 0.3 mg/L, as iron…

  • Nitrate CHEMets Kit, Range: 0-3.4 ppm

    CHEMetrics

    Nitrate is the most completely oxidized form of nitrogen. It is formed during the final stages of biological decomposition, either in wastewater treatment facilities or in natural water supplies. Low-level nitrate concentrations may be present in natural waters. However, a Maximum Contaminant Level…

  • Fluoride MDL+ Kit

    CHEMetrics

    Fluoride occurs naturally in most water supplies, and may be added to municipal water by injection of hydrofluorosilicic acid, sodium silicofluoride or sodium fluoride into the water stream as a public health measure. Fluoride compounds are also involved in the production of aluminum, steel,…

  • Nitrite VACUettes Kit, Range: 0-80 ppm

    CHEMetrics

    Nitrite, an intermediate in the nitrogen cycle, is formed during the decomposition of organic matter but readily oxidizes to form nitrate. These processes occur in wastewater treatment plants, water distribution systems, and natural waters. Nitrites are useful as corrosion inhibitors,…

  • Copper (Soluble) CHEMets Kit

    CHEMetrics

    Copper is naturally present in the earth’s crust and in seawater. Copper-containing fungicides are used to control biological growth in water supplies. The Maximum Contaminant Level Goal for copper is 1.3 mg/L in drinking water. The measurement of copper is an important means of…

  • Ozone CHEMets Kit

    CHEMetrics

    Ozone is a strong oxidizing agent and is used as an alternative to chlorine as a biocide in the disinfection of drinking water. Ozone is used to remove odor, decolorize, and to control algae and other aquatic growths. Ozone is also used in various disinfectant and sterilization processes in…

  • Sulfite (free) Titrets® Titration Cells

    CHEMetrics

    Sulfite is not usually present in surface waters. If sulfite is discharged in effluents or from domestic wastewaters, it readily oxidizes to form sulfate. Sodium sulfite is the most common form of sulfite and is an excellent reducing agent with applications as an oxygen scavenger. Sulfite…

  • DEHA CHEMets Kit

    CHEMetrics

    Dissolved oxygen in boiler system water causes corrosion and pitting of metal surfaces, which can lead to boiler inefficiency, equipment failure, and system downtime. DEHA (N,N-Diethylhydroxylamine) is added to boiler system water as an oxygen scavenger to keep the dissolved oxygen levels as low as…

  • Manganese VACUettes Kit

    CHEMetrics

    Surface and ground waters rarely contain more than 1 mg/L of soluble or suspended manganese. Manganese can act as an oxidizing or a reducing agent depending on its valence state. Manganese is also used in the manufacture of batteries and as an alloying metal in the manufacture of steel and…

  • Hydrogen Peroxide SAM Kit

    CHEMetrics

    Hydrogen peroxide is a strong oxidizing agent with a variety of uses. Applications include the treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging. The Ferric Thiocyanate Method Reference: D. F. Boltz and J. A. Howell, eds.,…

  • Ammonia Vacu-vials® Kit, Hydroxybenzyl Alcohol (HBA) Method

    CHEMetrics

    Low-level ammonia nitrogen may be naturally present in water as a result of the biological decay of plant and animal matter. Higher concentrations in surface waters can indicate contamination from waste treatment facilities, raw sewage, industrial effluents (particularly from petroleum refineries),…

  • Manganese Vacu-vials Kit

    CHEMetrics

    Surface and ground waters rarely contain more than 1 mg/L of soluble or suspended manganese. Manganese can act as an oxidizing or a reducing agent depending on its valence state. Manganese is also used in the manufacture of batteries and as an alloying metal in the manufacture of steel and…

  • Phosphate CHEMets® Kits

    CHEMetrics

    Phosphorus occurs naturally in rock formations in the earth's crust, usually as phosphate. High phosphate concentrations in surface waters may indicate fertilizer runoff, domestic waste discharge, or the presence of industrial effluents or detergents. Although phosphates from these sources are…

  • Hardness (Total) Titrets Kit, Range: 2-20 ppm

    CHEMetrics

    Hardness is a measure of the mineral content of water. Calcium and magnesium are the most common minerals that contribute to hardness. Hard water causes scaling in boilers and other industrial equipment, and diminishes the effectiveness of soaps and detergents. The EDTA Method (Total) …

  • Cyanide (Free) CHEMets Kit

    CHEMetrics

    Cyanide is used in many chemical and refining processes. It is found in effluent from electroplating and metal cleaning operations, coke ovens, steel manufacturing facilities, and gas scrubbers. Although cyanide can be safely removed by alkaline chlorination, its acute toxicity to aquatic life…

  • Glycol CHEMets Kit

    CHEMetrics

    Ethylene glycol and propylene glycol are the primary ingredients in commercially-available antifreezes. They are used with various corrosion inhibitors to protect metal surfaces in cooling water systems. CHEMetrics glycol kits are used to monitor potable waters for glycol contamination…

  • Sulfide CHEMets® Kits

    CHEMetrics

    Sulfides are naturally present in ground waters as a result of leaching from sulfur-containing mineral deposits. Surface waters do not usually contain high sulfide concentrations. Sulfides result from the decomposition of organic matter, from bacterial sulfate reduction under anaerobic conditions…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.