Water Quality Test Kits
-
DPD Chlorine Tablets
LaMotteMost Widely used DPD Chlorine Tablets for Determining Free and Combined Chlorine DPD chlorine tablets employ DPD indicator (diethyl-p- phenylenediamine) to distinguish levels of free, combined, and total chlorine in a simple test sample. DPD chlorine tablets designated “Instrument…
Related Products: Dpd Tablet
-
Total Hardness Test Kit
LaMotteApplications: Industrial Water Boiling and Cooling, Water and Wastewater This kit tests for Total Hardness using the Dropper Bottle Method. All results are as CaCO3. Range/sensitivity is 1 drop = 2, 5, or 10 ppm CaCO3.
Related Products: Hardness Test Kit
-
StormWatch MS4 Water Screening Kit
LaMotteThe LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA. Features …
Related Products: Water Test Kit
-
Sulfide Test Kits
LaMotte3322 Octa-Slide Comparator System For determining total sulfide Sufficient for 50 tests NPDES-EPA accepted Unit uses the Pomeroy methylene blue method for analysis. Total sulfide is determined using a color dye, which is added to an un-reacted sample until it matches a reacted…
Related Products: Hydrogen Sulfide Test Kit
-
Chloride Test Kit
LaMotteThis kit tests for Chloride in fresh water samples using the Direct Reading Titrator method. Applications: Environmental Education, Aquarium and Fish Farming
Related Products: Chloride Test Kit
-
Chlorine Test Kits
LaMotteDPD Tablet Octa-Slide (9859G42) Sufficient for 50 tests Employs DPD tablet method: EPA- accepted method for NPDWR Octa-Slide has color standards representing 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 and 3.0 ppm Cl Low Range Octet Comparator (9859H10) Employs DPD tablet…
Related Products: Chlorine Test Kit
-
Sodium Test Kit
LaMotteDirect Reading Titrator For determining levels of sodium in natural and treated waters Range 0 to 500 ppm sodium in 10 ppm increments Test requires three titrations: one to determine bicarbonate and carbonate ions; one to determine sulfate and chloride ions; and one to determine calcium and…
Related Products: Sodium Test Kit
-
Chromium Test Kit
LaMotteOctet Comparator Method For determining hexavalent, trivalent, and total chromium Octet comparator has color standards representing 0.1, 0.2, 0.4, 0.6, 0.8, 1.0, 1.2 and 1.5 ppm Cr Sufficient for 20 tests Test requires suitable hot plate, not included
Related Products: Chromium Test Kit
-
Peracetic Acid Kit
LaMotteThe 7191-01 is a dropper bottle titration kit for hydrogen peroxide and perocetic acid. The hydrogen peroxide equivalence is 1 drop = 50 ppm. The peracetic acid equivalence can be modified to test different concentrations by using a different sample size. The result is a 1 drop = 6, 15, or 300 ppm equivalence.
Related Products: Peracetic Acid Test Kit
-
Nitrate Nitrogen Tablet Test Kits
LaMotteThis kit tests for nitrate nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO3 - -N Applications: Drinking Water, Environmental Education, Food and Beverage, Industrial Water Boiling and Cooling,…
Related Products: Nitrate Test Kit
-
DPD Chlorine - Bromine - pH Test Kit
LaMotteKit Contains: 100 Chlorine DPD #1 Tablets 50 Phenol Red Tablets 3 Test Tubes, 2.5, 5, 10 mL, plastic w/ caps 1 Chlorine/Bromine Octa-Slide 2 Bar 1 Phenol Red Octa-Slide 2 Bar, pH 6.8-8.2 1 Octa-Slide 2 Viewer
Related Products: Chlorine And Ph Test Kit
-
Detergent Test Kit
LaMotte4507 Drop Count Method For determining anionic forms of detergent One drop equals 1.0 ppm detergents; range approximately 0 to 5.0 ppm Sufficient for 60 tests at 5.0 ppm
Related Products: Detergent Test Kits
-
Iron Test Kits
LaMotteOctet Comparator For determining total iron (dissolved, suspended and collodial) in natural waters Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10 ppm iron Bipyridyl indicator Sufficient for 100 tests Octet Comparator For determining trace…
Related Products: Iron Test Kit
-
Hardness Test Kits
LaMotteDirect Reading Titrator (9859X42 and X43) For determining total hardness of water Range 0 to 200 ppm as CaCO3 in 4 ppm increments Titrators may be refilled to test higher concentrations Sufficient for 50 tests at 200 ppm Direct Reading Titrator (9859X72 and X73) For…
Related Products: Magnesium Test Kit
-
StormWatch Drain Monitoring Kit
LaMotteThe Model SD Monitoring Kit was specifically designed and manufactured to meet US EPA requirements for field test procedures approved in the Federal Register (Volume 55, No. 217), to monitor illicit storm drain connections. Each unit includes tests for pH, Total Chlorine, Total Copper, Phenols,…
Related Products: Portable Water Quality Testing Kit
-
Color Test Kit, Octet Comparator
LaMotteFor determining color in water Tests an unlimited number of reagents The color of water is measured by comparing the water to platinum cobalt color standards representing APHA Standard Color Units. Tests 0, 20, 50, 80, 110, 140, 170, and 200 APHA color units.
Related Products: Color Comparator
-
Phosphonate Test Kit
LaMotte7625 CAS Dropper Pipet Sufficient for 50 tests at 20 ppm 1 drop = 1.25 ppm HEDP 1 drop = 1.4 ppm PBTC Chromazurol S method may be used for Dequest, Bayhibit, Belcor 575 and Belsperse 161 phosphonates. Indicator changes from yellow to pink at the pH ideal for the reaction, then…
Related Products: Nitrate Test Kit
-
Chlorine Bleach Test Kit
LaMotteApplications: Industrial Water Boiling and Cooling, Water and Wastewater This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.
Related Products: Bleach Test Kit
-
Octet Comp Test Trace Copper
LaMotteFor determining trace levels of copper in water Octet Comparator has color standards representing 0, 0.05, 0.10, 0.15, 0.20, 0.30, 0.40 and 0.50 ppm Cu Sufficient for 50 tests
Related Products: Copper Test Kit
-
Limnology Test Kit
LaMotteFor Environmental Studies For determining life-supporting chemistry of fresh-water environments, including ponds, lakes, streams, rivers and marshes Tests for: carbon dioxide, D.O., hardness, nitrate, trace phosphates, wide-range pH and silica Includes water sampling bottles, report forms and…
Related Products: Phosphate Test Kit
-
Silica Test Kit
LaMotteOctet Comparator For determining silica in natural and industrial waters Employs modified APHA Method 425D Octet Comparator has color standards representing 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0 and 10.0 ppm silica Sufficient for 50 tests
Related Products: Silica Test Kit
-
Chloride Test Kits
LaMotteEPA-accepted method for NPDWR and NPDES Employs modified APHA Argentometric method Range of 0 to 50 ppm Cl in 1 ppm increments Sufficient for 50 tests Range of 0 to 200 ppm Cl in 4 ppm increments Sufficient for 50 tests at 200 ppm Employs Argentometric method
Related Products: Chloride Test Kit
-
Test Kit Nitrite Sodium
LaMotteThis kit tests for nitrite using the direct reading titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO2 Applications: Industrial Water Boiling and Cooling, Water and Wastewater
Related Products: Nitrite Test Kit
-
Potassium Test Kit
LaMotteFor determining potassium in natural waters and brine Turbidity tube is calibrated for 6, 8, 10, 20, 30, 40 and 50 ppm potassium Sufficient for 100 tests For replacement reagent, order 0534B49
Related Products: Lamotte Potassium Test Kit
-
Sulfate Test Kit
LaMotteOctet Comparator For determining sulfate in natural waters and waste waters Employs modified APHA turbidimetric method with barium chloride Has color standards representing 20, 40, 60, 80, 100, 120, 160, and 200 ppm sulfate, sufficient for 50 tests
Related Products: Sulfate Test Kit
-
Salinity Test Kit
LaMotteFor determining salinity (as chloride content) of water Employs modified APHA Argentometric method Range of 0 to 20 ppt salinity in 0.4 ppt increments Sufficient for 50 tests at 20 ppt
Related Products: Chloride Test Kit
-
Nitrate And Phosphate Combination Test Kit
LaMotte3119 Octet Comparator Method Color standards for 0.2, 0.4, 0.6 and 1.0 ppm NO3—N Color standards for 0.2, 0.4, 0.6 and 1.0 ppm PO4 Sufficient for 40-50 tests
Related Products: Phosphate Test Kit
-
Funky Faucet Sink Science
LaMotteWhat’s coming out of your funky faucet? Test tap water for pH, chlorine, hardness, copper, and iron. Learn while you laugh with Just for Fun activities including make your own lava lamp and edible experiments lke the Pollution Parfait. Non-hazardous TesTabs reagents To run 10 tests each …
Related Products: Lamotte Water Test Kit
-
QAC Test Kit
LaMotteDirect Reading Titrator For determining QAC (quaternary ammonium compounds) in cooling waters and sanitizing solutions Range of 0 to 500 ppm QAC in 10 ppm increments Sufficient for 50 tests at 500 ppm
Related Products: Quaternary Ammonium Test
-
Nitrite Sodium Kit
LaMotteThis kit tests for Sodium Nitrite using the Direct Reading Titrator method. Applications: Industrial Water Boiling and Cooling, Water and Wastewater Range/sensitivity is 0-1000 ppm/20 ppm NaNO2
Related Products: Titration Kit
-
Hardness Kit
LaMotteThis kit tests for Calcium Hardness in fresh or salt water. Includes inhibitors to eliminate metal interferences. All results are as CaCO3 Range/sensitivity is 0-200 ppm/4 ppm CaCO3, 0-2,500 ppm by dilution Applications: Environmental Education, Food and…
Related Products: Water Hardness Test
-
