Test Vials

40% larger opening than standard narrow opening vials 12 x 32 mm Tightly controlled crown for improved crimping Precision-formed neck designed for optimal robotic arm handling The wide opening crimp cap provides a larger taget area for improved autosampler needle accuracy. Select from four cap...

For use with 12 x 32 mm crimp top vials Septa included Larger opening Variety of colors Increased target area for needles helps prevent breakage. Allows color coding for easy sample identification. Our 11mm aluminum seals and snap caps are available assembled with a septa and a round metal o-ring...

12 x 32 Crimp Top Vials Type I Borosilicate Glass Clear or Amber 40% larger opening Increased target area helps prevent broken needles. Designed to work in Agilent (HP) and other autosamplers. Vial incorporates the unique StepVial design that precisely centers a limited volume insert in the vial...

Available in clear or amber borosilicate glass. Assembled with the patented Top Hat™ Liner system. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing...

Clear screw thread sample vial Closed-top black phenolic closure with rubber liner (not attached) 60910L series vials are packaged in lab packs Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Color-coded polystyrene inserts snap into recess in top of screw cap on Nunc CryoTube Vials Can be marked with 5151Y50 series Cryomarkers. Not usable with CryoTube Vial II.

The addition of multi-color caps expands the offering of Corning cryogenic vials that researchers have come to trust for the ultralow temperature storage of valuable cell cultures, biological solutions and aqueous solutions. The superior performance of Corning's cryogenic vials is delivered...

Starburst and conical design of the snap plug provides self centering needle penetration guidance as well as better resealability of plug after use. Plug is designed to easily push in and remove from the vial. Tight fit offers good sealability. The 15mm Snap Plug has a pre-scored starburst to offer...

Azenta Life Sciences dual-coded tubes feature a 2D code and human readable number on tube base, allowing compatibility with low throughput manual, semi-automated or fully automated workflows on integrated platforms Next Generation manufacturing techniques Code readable without removing tubes from...

Available in clear or amber borosilicate glass. Assembled with the solid top PTFE-Lined closures. Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol. Class 1: (Standard) Containers are assembled with liner and closure without washing treatment....

Designed to work in the Waters WISP™ 96 position autosampler. Available in clear or amber Type I borosilicate glass, or polypropylene for easy disposal. Vials feature thicker walls for safer sample handling. Limited volume shell vials have a precisely designed conical bottom which permits...

Designed to work in Agilent (HP) and other autosamplers. Neck finish allows use of standard aluminum seals or Poly Crimp™ Seals. Choose from clear or amber Type I borosilicate glass. Available with graduated marking spots which can be written on with a #2 pencil. 2.0 mL volume, 11 mm seal, 12...

PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone....

Manufactured from polypropylene 500 or 750 µL conical interior reduces sample size Available with snap/crimp or screw top finish 100 vials per shelf pack/1000 vials per case

labForce® Brand Limited Volume Inserts are ideal for sampling small volumes using a labForce® 12x32mm vial for support. Inserts are pre-assembled with a polyethylene spring which aids in alignment. Manufactured from Type I borosilicate glass Conical design permits complete sample removal...

Vials with open top caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supplied. 9711B25 use Septa 9711D35 9711B55 use Septa 9711D45 Screw Caps (9711C10 to C45) Open-top Phenolic Screw Caps are for use with 9711D10 series...

labForce® Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA Custom Pre-printed Barcodes and other...

Available in clear or amber borosilicate glass Choice of 0.125” or 0.100” PTFE/Silicone Septa Available in standard, precleaned or precleaned/certified in accordance with recommended E.P.A. Protocol CLASS 1: (Standard) Containers are assembled with liner and closure without washing...

The new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the...

Contains 100 amber glass ABC vials and 100 ABC Caps with PTFE/Red Silicone Liners.

Vials with vinylite liners Consisting of 9710F12 series borosilicate glass vials and attached 2386C10 series caps fitted with cork-backed vinylite liners Vials with Caps (9710D13 to D73, 1233Z28 to Z37) Vials without Caps (9710F12 to F82, 9711B45) Custom Pre-printed Barcodes and other Marking...

labForce® Brand 9mm polypropylene vial is an economical alternative to glass and is compatible with many solvents. 12x32mm vial with a 40% larger opening Capacity - 100uL to 300uL Manufactured from chemical resistant polypropylene Designed to work in robotic arm autosamplers Ideal for Ion...

J.G. Finneran Associates designed Limited Volume Inserts with and without Bottom Springs to ensure that autosamplers extract even the smallest sample volumes every time, without damaging injection needles or breaking sample containers. The inserts preassembled with polymer bottom springs act as...

Features: Made of medical grade polypropylene: Autoclavable, can be repeatedly frozen and thawed. Gamma radiation sterilized, DNase & RNase free, endotoxin free, foreign DNA free Stabile from -196C to 121C (vapor phase of liquid nitrogen)