Vacuum Pump Aspirator

Humboldt Aspirator Filter Pumps offer excellent performance for vacuum filtrations under both high and low water pressure conditions. The pumps feature a ball-type, positive-action valve in the suction tube which prevents water backflow if the pressure is reduced.

… Replace water aspirator Aspiration Degassing Vacuum drying Fume suction The PILOT3000 is equipped with a 1/7 hp motor and provides a maximum 20 L/min (115V/60Hz) of free air displacement and 22 in-Hg of maximum vacuum. The pump features a vacuum regulator with gauge…

High-density polyethylene aspirator pump operates on water pressure above 11psi (7584 N/m2). Integral check valve resists corrosive filtrates and fumes Quick-disconnect hose fitting accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Male thread faucet connection is 9.5mm (3/8")…

The Accuris ASPIRE Laboratory Aspirator incorporates a quiet, maintenance-free pump inside a sturdy, yet compact base. The vacuum is fully adjustable, with a pressure gauge that displays the vacuum level, allowing full control of aspirating speed. The ASPIRE is an ideal choice for a wide range of…

…aspirating aqueous solutions including buffers but are not recommended for acidic, basic or organic vapors and gases. 1233K55 features a high flow (34 lpm), WOB-L piston pump. Vaccum is 27.2 Hg (70 Torr) and the unit has a 115V, 60 Hz power requirement. 1233K56 features a 28 lpm capacity, vacuum…

…Quiet, oil free membrane pump has a range from -250 mm to -650 mm Hg. Once target vacuum is reached, pump automatically switches off. Pump automatically switches on when vacuum pressure is applied allowing it to maintain a constant vacuum pressure - perfect for gentle aspiration of small plates and…

…Adjustable Vacuum / Pressure Use these affordable oil-free pumps to provide convenient vacuum throughout the lab. Welch WOB-L piston pumps provide adjustable vacuum for filtration, SPE, vacuum ovens, and more. These pumps are an efficient alternative to water aspirators. Select vacuum range…

…aspirator Aspiration Degassing Vacuum drying Fume suction Features Made in the USA PTFE contact surfaces Bleach safe for cell culture bio decontamination protocols Vacuum to 24" Hg Flow of 37 lpm Liquid inlet trap with ball check valve Vacuum…

…including bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum source is not available, outside of the laboratory setting where a vacuum is required, or when…

… The use of an aspirator is preferential to using a generic laboratory vacuum line as it restricts the possibility of contamination and can be used exactly where the operator is located i.e. no need for a dedicated position in the laboratory to perform the aspirator. Applications :…

…strength or HiFlow pump. Self-contained system with 1.0 gallon bottle, tubing and vacuum pump is lightweight, compact and easy to use Practical whenever a house vacuum is absent or not working Built-in, maintenance free pump quickly and conveniently aspirates fluids HiFlow model…

…autosampler, one precision peristaltic pump and a switching valve. It provides quick sample turnaround with: Fast rinse-out Short signal stabilization times No sample-to-sample memory effect The FAST Flame 1 accessory rapidly fills a sample loop via vacuum and then switches to inject the…

…faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute

…aspiration needs Containment: 2 or 4 liter vessels for safe collection and disposal of your biological waste; an autoclavable hydrophobic 0.2µm biofilter protects the pump or other vacuum supply from biohazardous aerosols. The VacuuHandControl (VHC) keeps all fluid within the aspiration…

…moisture. Units are suitable for aspirating aqueous solutions including buffers but are not recommended for acidic, basic or organic vapors and gases. Units feature pressure capacity to 33 psig (3.3 x 105 pascal). 1233K57 has a pumping capacity of 11 lpm and vacuum to 21.3 Hg (292 mbar). Power…

…funnel. The Vacuum Pump is simplifies the process of vacuum filtration, eliminating the need for a water source and vacuum aspirator. It is also much more economical than a costly electric vacuum pump. The pumping rate is 15ml per stroke and will displace up to 725ml of air. The pump is fitted with…

Vacuubrand BVC Basic Liquid Aspiration System Designed for use with existing vacuum supplies, individual diaphgragm pumps and house vacuum systems Include mechanical regulator to control vacuum supply to provide sufficient suction for aspiration or filtration, without evaporating the…

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

…provide automated dispensing and aspiration of western blot reagents. The IBI Blot Washer system comes with the pump/module, 4L wash bottle with cap, 4L waste bottle with cap, mini blot tray, standard blot tray, vacuum tube with connectors, dispense manifold, aspirate manifold, power cord, and…

…with integrated pump 2L autoclavable polypropylene trap flask Fitted with hydrophobic microbiological filter Vacuum pressure: -200 to -800mbar (adjustable) Overflow protection - liquid level sensor detects excess liquid and prevents overflow The use of an aspirator is preferential…

…autosampler, one precision peristaltic pump and a switching valve. It provides quick sample turnaround with: Fast rinse-out Short signal stabilization times No sample-to-sample memory effect The FAST Flame 1 accessory rapidly fills a sample loop via vacuum and then switches to inject the…

…autosampler, two precision peristaltic pumps and a switching valve, providing quick sample turnaround with fast rinse-out, short signal stabilization times and no sample-to-sample memory effect. The FAST Flame 2 accessory rapidly fills a sample loop via vacuum and then switches to inject the sample…

…autosampler, two precision peristaltic pumps and a switching valve, providing quick sample turnaround with: Fast rinse-out Short signal stabilization times No sample-to-sample memory effect The FAST Flame 2 accessory rapidly fills a sample loop via vacuum and then switches to inject the sample…

…is aspirated into corresponding collection vessel below. Cover seals against foamed plastic gasket. Requires suitable external vacuum source such as water aspirator or vacuum pump. Accessory racks can be substituted for automatic samplers. Without vacuum source, vacuum tubing or vacuum trap.…