Laboratory Liquid Pumps

Lab liquid pumps are ideal for transferring liquids from one container to another in a controlled environment. They are essential for transporting or moving various regents, liquids, and corrosive chemicals from one container to another.
Liquid pumps help maintain a consistent flow rate regardless of factors, including viscosity. Flow consistency is vital for maintaining accuracy with various experiments and processes.
Available at Thomas Scientific is a range of lab peristaltic pumps suitable for sensitive or corrosive liquids. Syringe pumps are also excellent for delivering precise and accurate volumes of liquid to support cell growth applications.
Microfluidic pumps are designed for applications that involve manipulating tiny volumes of fluids on microscales. Microfluidic pumps can control flows in the microliter or even nanoliter range.
Some pumps have additional accessories that provide easy maintenance, cleaning, and tubing replacement options to ensure clean and precise results.

Compare Tool

Select up to 3 products

HomeAll Products

Pumps Liquid Pumps

1 - 32 of 56
Sort
View
Show
  • Watson-Marlow

    SCI Q Speed range 0.5-90 rpm Switch selectable from 100-120 V to 220-240 V Digital closed-loop 180:1 speed control Pump liquids from 0.0003 to 21 mL /min per channel through 4 to 32 channels. Cartridges can be added or removed without disturbing pumping action of remaining…

  • Heavy-duty Pump siphons up to 7 gallons per minute from 55-gallon drums. Moves up to 7 gallons of liquid per minute Compatible with mild solvents, light oils, diluted acids/caustics and disinfectants Maximum recommended viscosity: equal to 30-40 wt. oil

  • Device for easy operation to quickly fill off watery liquids from containers higher up to containers lower down. Works according to the siphoning principle: Liquid needs only to be primed once, therefore especially handy for complete emptying of a container. LDPE/PVC Pump capacity 9…

  • Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with…

  • Franklin Electric

    Self-priming, completely submersible Output 3 1/4 gpm (12 Lpm) at one-foot (0.3 m) head, 2 gpm  (7.5 Lpm) at five-foot (1.5 m) head; maximum pressure 3.2 psi (22 kPa) Continuous-duty, 1.1 ampere motor, sealed and permanently lubricated, enclosed in epoxy-coated, cast-aluminum…

  • Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

  • Watson-Marlow

    The 120 Series are small, but full-featured, laboratory pumps with simple intuitive operation and four pumphead options to suit any application. Compact footprint requiring minimal benchtop space: stacks two high Four pumphead options, with 1-, 2-, or 3-channel options to cover any application …

  • 5-pack AirChek ® XR5000 Pump Kit, high flow and low flow sampling, with five each: XR5000 pumps with high-power Li-Ion battery, filter cassette holders, adjustable low flow holders, constant pressure controllers, protective Type A tube covers, (1) five-station Multi-charger, 100-240V, and one…

  • Bürkle

    We offer a broad range of thread adapters. This facilitates the secure connection of many of our pumps and discharge cocks to a variety of containers. You will always find the correct connection thanks to the combination of different adapters.

  • VELP Scientifica has developed a range of peristaltic pumps useful for transferring liquids in industry sectors like pharmaceutical, food, biotechnological, chemical, beverage. Simple Operation Minimum maintenance (just replace the tube) Easy cleaning – no contact of liquid…

  • The VERITY® Syringe Pumps provide speed and reliability to small- and large-volume, repetitive liquid transfers in HPLC, SPE, and other general liquid handling methods.These pumps work with many VERITY systems and are available in single syringe, dual syringe, and dual syringe with tee…

  • Backlit LCD Continuous dispense volume display Model 7888R96 is a single syringes infusion pump holding one syringe, 10 µL to 60 mL. 

  • Franklin Electric

    Centrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…

  • Epoxy filled pumps are compact in design, energy efficient, and have a corrosion-resistant plastic housing.

  • Franklin Electric

    4/10 hp Submersible Sewage Pumps designed to handle 3/4" solids. Permanent split capacitor (PSC) motor, heavyduty cast iron housing, volute and cover, non-clog thermoplastic elastomer impeller and thermal overload protection. The "RF" automatic models feature a “piggyback” mechanical float switch…

  • Very flexible output/flow with the same pump Corrosion-proof with glass fiber reinforced polypropylene housings Adjustable stroke length and frequency Very low minimum outputs possible with 200:1 turndown ratios Maximum flow rates of up to 34 LPH at 60 psi …

  • Franklin Electric

    1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…

  • Franklin Electric

    Small submersible pump that works well in marine applications. Pump can be used inline for intermittent use only.

  • GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

  • Franklin Electric

    5 Series: 1/6 hp Submersible Sump/Utility Pump with cast aluminum housing, plastic base, bottom sump-type pick-up with removable plastic screen, pumps down to 1/8", thermal overload protection, 1" FNPT discharge with a garden hose adapter. 5-ASP features a diaphragm pressure switch…

  • Franklin Electric

    Non-submersible high pressure pump used for carpet cleaners, dispenser displays and pressure washer applications. 3/8" OD barbed intake and discharge, 24" lead wires.

  • The Franklin Electric 505712 is for submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter. Utility Water Pump: For submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and…

  • With universal plug made of soft PVC, for container volumes Ø 30-70 mm Scope of delivery: Pump ball, universal plug, cutter and 10 disposable delivery tubes OTAL pump with disposable delivery tube made of PE, for single use.In OTAL pumps the medium being transferred comes in contact only…

  • GoatThroat® Pumps work by pressurizing a container to dispense liquids with one touch, as easily as using a faucet. A few strokes of the piston can pressurize any container from 2-gallon jugs to 55-gallon drums. One-touch flow control dispenses liquids at a controlled rate to prevent…

  • The Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion Pump is driven by a tachometer regulated,…

  • Holland Green Science

    The Aether series Vacuum Pump is a high-speed, motor direct drive, dual-stage oil-sealed rotary vane pump. Suitable for use with inactive gases within the scope of low vacuum with a small amount of non-condensable gas. Features: 142 L/min free air displacement High Reliability High…

  • A device which allows a sampling pump to operate at low flow rates and with the optional adjustable low flow tube holders. The CPC is placed inline between the adjustable low flow tube holder and the pump inlet, and regulates the specific amount of pressure to be maintained across the needle…

  • For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

  • The Micro-Perfusion Pump is a miniature, single or dual, channel, full-featured peristaltic pump designed for specific ranges of flow rates conducive to microscopy. Unlike most peristaltic pumps that are driven by stepper motors, the Micro-Perfusion pump is driven by a tachometer regulated,…

  • Bürkle

    When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion. Bürkle’s Anti-static set ensures easy and reliable earthing. The…

  • The Watson-Marlow accessories are suitable for use with DPM dispensing and transfer pump models, which are mainly used to overcome fluid handling challenges in various industries. These accessories ensure versatile, smooth and uninterrupted functioning of the transfer pumps.

Compare Tool

Select up to 3 products