Tds Meter

Compare Tool

Select up to 3 products

Tds Meter
1 - 32 of 117
Sort
View
Show

Hach

  • …is a Compact handheld Conductivity Meter with long life carbon rod combination electrode measures Conductivity, TDS and Temperature. Units of measure include μS/cm, mS/ cm, ppm, °F, and °C. The meter features three ranges for Conductivity and TDS plus adjustable Temperature compensation…

  • PC200 Portable pH/Conductivity Meters

    labForce (a Thomas Scientific Brand)

    …of up to 12 kinds of buffer solutions and supports stable reading/auto-hold display mode. The meter's digital filter technology improves response time and accuracy. Switch among conductivity, TDS, salinity and resistivity measurement mode. Auto recognition of up to 8 types of conductivity…

  • …meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. The MW401 has a range of 0 to 1990 mg/L (ppm) with a 10 mg/L resolution; The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.

  • …Conductivity and TDS applications, the Hach HQ14D portable Conductivity and TDS meter is an advanced handheld digital meter that takes the guesswork out of measurements. The Hach HQD digital Conductivity/TDS meter combines reliability, flexibility and ease of use. The HQD portable meters connect…

  • Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof…

  • …the bench than other meters Large display lets you see your measurements from across the lab Conductivity and TDS autoranging chooses the best resolution for each measurement The pH/CON 700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display…

  • Waterproof TDS Tester (Low Range)

    Milwaukee Instruments

    …such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement. The T75 is a waterproof TDS tester (for fresh water) with automatic temperature compensation, 1 point manual calibration and a range of 0 to 1999 ppm (mg/L). T75 is supplied…

  • …with a battery powered pH 5 meter. The meter measures the pH of a one-to-one solution of soil and distilled water over the range of 0 to 14 pH units to a sensitivity of 0.01 pH. Soluble Salt levels in soils and irrigation waters are monitored accurately with a TDS 5 meter measuring dissolved salts…

  • …standard The state of the art LCD simultaneously displays ppm of Total Chlorine and Temperature plus analog bargraph indicator Complete with meter and flat surface Chlorine electrode, ExTab® reagent tablets (50 tests), protective sensor cap, sample cup with cap, four 3V CR-2032 batteries,…

  • …user-friendly operation. All meters include electrodes and temperature probes. Push button operation Three point calibration Temperature readout Automatic Temperature Compensation Auto-off after 17 minutes Hold function Adjustable conductivity to TDS factor Includes two…

  • …Conductivity, TDS, and salinity in one meter Expanded 4-digit dual-line display shows conductivity and temperature readings simultaneously Additional key provides an easier, more intuitive interface Improved cap functions as a sample cup and as a stabilizing base to stand the meter upright …

  • 7-in-1 Meter with Lab-Quality Performance Measures Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature Waterproof housing (meets IP57) Automatic one button pH calibration (4, 7, and 10pH) Choice of 3 point pH calibration for better accuracy One point Conductivity calibration −…

  • Autoranging meter offers 3 ranges of measurements from tap water to wastewater and any aqueous solution Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, and g/L Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 - conveniently calculates the TDS value Large 3-1/2 digit (2000…

  • …dropping in the field Auto shutoff extends battery life These economical, simple-to-use pocket testers quickly measure conductivity, TDS, or salinity levels accurately while simultaneously displaying the temperature. A large dual-line display makes viewing measurements easy and features…

  • …benchtop meter is an advanced laboratory meter that takes the guesswork out of measurements. HQd meters connect with smart probes that automatically recognize the testing parameter, calibration history, and method settings to minimize errors and setup time. The advanced benchtop meter is designed…

  • SD 80 TDS Meter

    Lovibond

    The SD 80 TDS Tester is ideal for field testing in environmental or industrial settings as well as for pool and spa testing! The robust housing is completely waterproof (IP67 rated!) and the intuitive scroll-bar functionality combined with a backlit display enable the easy measurement and…

  • Waterproof meter with high-accuracy multi-ranging sensor Units of measure include µS/cm, mS/cm, ppm, ppt Adjustable Conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value Large 3-1/2 digit (2000 count) LCD display Data Hold and low…

  • The SD 320 Con measures Conductivity, Salinity, TDS and Temperature. As conductivity depends strongly on temperature, each conductivity value is only valid at the corresponding temperature. Therefore, the instrument supports temperature compensation ie referring the conductivity to a reference…

  • 3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements. MW801…

  • After more than a century of perfecting the art of measurement through our durable weighing products, OHAUS precision is now available in a line of pen meters that provide accurate measurement of pH, oxidation-reduction potential (ORP), conductivity, s

  • 3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too…

  • …dual-level LCD the EC (3999 µS/cm) or TDS (2000 ppm) value. It also displays the temperature from 0.0 to 60.0°C (or 32.0 to 140.0°F) on the secondary level at the same time. EC60 shows on the dual-level LCD the EC (20.00 mS/cm) or TDS (10.00 ppt) value. It also displays the…

  • Waterproof TDS Tester (High Range)

    Milwaukee Instruments

    …such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement. The T76 is a waterproof TDS tester with automatic temperature compensation, 1 point manual calibration and a range of 0 to 9999 ppm (mg/L). T76 is supplied complete with…

  • …feature which “locks-in” the reading for precise measurements. All meters come with a three (3) year warranty. Cond 3110 Instrument Only Easy-to-operate, robust conductivity portable meter with large LCD display for routine field applications using 2- and 4-electrode cells.…

  • …to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications. MW402 has a range of 0.0 to 10.0 g/L (ppt) with a 0.1 g/L resolution. The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.

  • …space Large brightly lit display allows for easy reading of measured values Easily toggle between conductivity and TDS at the touch of a button! CON 700 meter reads 0 to 199.9 mS across five ranges—autoranging feature automatically gives the best resolution for your measurements.…

  • Rugged housing with large LCD displaying the parameter being measured together with time, date and temperature (in ºC or ºF). Automatic or manual temperature compensation Automatic or manual ranging Automatic buffer recognition Digital and analog outputs Min/Max and 99 data points …

  • The new SensoLab Series Benchtop Conductivity / TDS Meter is the perfect solution for a range of applications from instructional chemistry laboratories to quality control testing. This versatile meter can be powered in two ways, either with 6 AAA batteries to save your valuable bench space or with…

  • …for rapid testing of pH, ORP (Oxidation Reduction Potential)/Redox, conductivity, resistivity, Total Dissolved Solids (TDS), minerals/salts, and temperature Probe-free meter enables single-handed operation for high-throughput testing or spot checking Achieve reliable readings without frequent…

  • Large LCD built into adjustable "flip-up" cover displays measurement and Temperature simultaneously Microprocessor based with splash proof housing and front panel tactile touch pad to slope and calibrate Rugged design for handheld or benchtop use; neckstrap for "hands-free"…

  • 3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The AG900, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too…

  • …selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ß) from 0.0 to 2.4% for greater consistency and reproducibility. The…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.