Sterilization Indicator

Compare Tool

Select up to 3 products

Sterilization Indicator
1 - 32 of 322
Sort
View
Show
  • …described in ISO 11140-1 “Sterilization of health card products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. Hydrogen Peroxide CPIs are not intended for use as sterility indicators, but rather as throughput process indicators used to monitor…

  • …for use in monitoring Hydrogen Peroxide (VH2O2) sterilization processes. Spore Coupons are sterilized 316 steel coupons inoculated with spores at a specified population level with known resistance to vaporized hydrogen peroxide sterilization processes. Individually packaged in Tyvek®/Mylar…

  • “Sterilization of health care products - Chemical indicators - Part 1: General requirements,” for Class 1 Process Indicators. The purple-to-green color transition is sensitive to time, temperature, humidity and presence of EO. EO CPIs are not intended for use as sterility indicators, but…

  • Twindicator® is an indicator designed for monitoring all critical parameters of steam sterilization cycles at 250°F (121°C) and 273°F (134°C). Twindicator® adds extra flexibility in sterilization monitoring: each 8” strip is perforated to allow for two 4” strips.…

  • …steam sterilization at 121°C for 15 minutes Easy-to-read; media’s color changes with growth Rapid results; read after 24 hours Sterikon ® Plus indicators contain nutrient broth, sugar, a pH indicator and spores of apathogenic bacillus stearothermophilus. Following sterilization, the…

  • Autoclave Indicator Tapes

    Globe Scientific

    …have passed through a sterilization cycle. Each roll is 165 feet (50m) long. 1181C23 is used when using autoclave sterilization (20 ft. at +121°C, 10 ft. at +125°C and 5 ft. at +135°C) The color of the tape changes to brown when done with the sterilization process Lead free…

  • Crosstex offers a full line of Spore Strips for use in monitoring sterilization processes. Spore Strips consist of inoculated filter paper, 6 mm x 30 mm, packaged in glassine peel pouches or envelopes. The glassine packaging provides protection from environmental contaminants during transport post…

  • Gas-Chex® Sterilization Indicators

    Propper Manufacturing

    …change to green will not occur, even if the other exposure conditions were adequate. 8" Gas-Chex indicator strip features a special diamond-shape indicator that aids in sterile presentation. The "Gas-Chex" end of the strip should be placed in the portion of the package judged…

  • …steam sterilization processes. Detection media will turn yellow in the event of a sterilization process failure. The final readout of a negative result (media remains purple) is made after 24 hours of incubation. 1251D07 indicators are designed for monitoring ethylene oxide (EO) sterilization

  • …for use in monitoring Hydrogen Peroxide (VH2O2) sterilization processes. Spore Coupons are sterilized 316 steel coupons inoculated with spores at a specified population level with known resistance to vaporized hydrogen peroxide sterilization processes. Individually packaged in Tyvek®/Mylar…

  • Crosstex manufacturers Spore Discs for Steam, Ethylene Oxide(EO) and Hydrogen Peroxide(VH2O2/Plasma) sterilization processes. Spore Discs are available in 3 mm, 6 mm and 9 mm diameters. Spore Discs will fit into small areas of a device where a standard-sized (6 mm x 30 mm) Spore Strips cannot be…

  • …1 Process Indicators. The blue-to-pink color transition is sensitive to time, temperature and the presence of saturated steam (see chart to right). Steam CPIs are not intended for use as sterility indicators, but rather as throughput process indicators used to monitor exposure to steam sterilization

  • Self seal sterilization pouches with bio indicator.

  • OK® Sterilization Indicator Strips

    Propper Manufacturing

    …of the results. If the sterilization conditions meet equirements, the arrow and the K will change to become at least as dark as the reference color O forming the OK expression. The color response pattern may be used for sterilizer diagnostic evaluation. The indicator dot printed on the distal…

  • Cardinal Health™ Paper Sterilization Pouch combines a blue film and a medical grade paper to provide breathability, sterile barrier, and indication of processing. Each pouch includes an external process indicator for Steam and Ethylene Oxide (EO) Gas sterilization. To assist opening, a…

  • Use with EtO, steam, gamma irradiation, E-beam sterilization technology. Highest bacterial filtration efficiency (BFE) available. Highly permeable - no wet packs. Bacterial barrier to both airborne and waterborne contamination. Outstanding liquid repellency - water, alcohol, iodine. Even…

  • …rolls Available in multiple widths Designed for use at 250°F (121°C) for 30 minutes or 270°F (132°C) for 4 minutes Special Note: Accept only when indicator turns a dark color when processed. Other color variations may be indicative of suspect sterilization conditions.

  • Crosstex manufacturers Spore Discs for Steam, Ethylene Oxide(EO) and Hydrogen Peroxide(VH2O2/Plasma) sterilization processes. Spore Discs are available in 3 mm, 6 mm and 9 mm diameters. Spore Discs will fit into small areas of a device where a standard-sized (6 mm x 30 mm) Spore Strips cannot…

  • Featuring dual steam and EtO process indicator arrows that change color after processing. Pouches are constructed from medical grade paper and blue tinted transparent film. Triple sealed edges prevent separation or tearing.

  • …Chemical Indicator introduces innovations in indicator ink technology based on our advanced lead and heavy metal free ink formulation. Our new generation of indicators demonstrates exceptional performance which is customized for the most widely utilized steam cycles in hospital sterilization.

  • Radiation Chemical Process Indicators (CPIs) are manufactured to meet performance specifications described in ANSI/AAMI/ISO 11140-1 “Sterilization of health care products - Chemical indicators - Part 1: General Requirements,” for Class 1 Process Indicators. The color transitions are dose…

  • Verifies the sterility of your instruments, glassware and other products in just two days Simple, three step process Run indicator through standard sterilization cycle; compress plastic vial to break glass ampule inside and then incubate for a minimum of 48 hours. When complete,…

  • …multi-parameter indicators to each pouch Provide you with both convenience and economy Meet CDC Infection Control Guidelines for effective sterilization Are tested and certified by an independent laboratory to validate the indicators as requiring time, temperature and sterilant contact to…

  • …labels For use in dry heat sterilizers Comply™ (ATI Sterilabel™) Sterilization Indicator Labels are for use in dry heat sterilizers 170°C (340°F) or above. Pressure-sensitive labels are for hard-surfaced areas such as unwrapped glass or metal. The indicator ink on the label turns from tan…

  • DUO-FLASH® Sterilization Indicators

    Propper Manufacturing

    indicator integrity even in the wettest cycles and prevents ink transfer from the indicator to the instruments. Its durable construction, convenient design and permanent color change were all developed with the requirements of flash sterilization in mind. If required, the indicator may be…

  • Crosstex offers a full line of Spore Strips for use in monitoring sterilization processes. Spore Strips consist of inoculated filter paper, 6 mm x 30 mm, packaged in glassine peel pouches or envelopes. The glassine packaging provides protection from environmental contaminants during transport post…

  • Sterilization Indicator Tapes

    Propper Manufacturing

    …self-adhesive tape is designed to distinguish processed and unprocessed items. Made of strong crepe-embossed paper with pressure-sensitive adhesive, the tape is ideal to secure different types of sterilization packs. Marking with permanent ink pen leaves no bleadding on the tape after sterilization.

  • Crosstex offers a full line of Spore Strips for use in monitoring sterilization processes. Spore Strips consist of inoculated filter paper, 6 mm x 30 mm, packaged in glassine peel pouches or envelopes. The glassine packaging provides protection from environmental contaminants during transport post…

  • …Each label, with printing, is available in the five different colors  listed below, or in white without any printing. Labels can be affixed to packages before or after sterilization. A special label (for indefinite shelf use) printed “STERILE UNLESS OPEN” is also available.

  • …biological indicators and test packs for steam sterilization cycles Biological indicators that monitor the effectiveness of the steam sterilization process and provide results within 24-48 hours. Biological indicators provide the best assurance of sterility by challenging the sterilizer with…

  • …required with this hermetically sealed product. Because SporAmpule is a completely sealed system, there is no chance of contamination. Sterilization failure is noted when spore growth occurs (purple to yellow color change and visible turbidity) with a processed SporAmpule. An unprocessed…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.