Round Bottom Flask Support

Compare Tool

Select up to 3 products

Round Bottom Flask Support
1 - 32 of 39
Sort
View
Show
  • …The support rod can be clamped to lattice within the hood during use or serve as a handle when moving the unit. Each bath is also supplied complete with a clip to accept standard type "J" themrocouples up to 1/8" OD. The 350mL bath fits the 300mL or smaller round bottom flasks. The…

  • …Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Controlled Electromantles. The CMUT Electromantle is used in wet chemistry to heat liquids in round bottom flasks. Its metal case is designed to…

  • For supporting round-bottom flasks, dishes, etc. All rings are 30 mm high with inside edge beveled

  • Reversible; can also be stacked upon each other. Three sizes provide six different diameters for round-bottom flasks ranging from 50 to 6,000 mL. Excellent adhesion to glass prevents slippage and also offers thermal and electrical insulation. Available in two rubber types.

  • …mantle for applications needing more heat. Aluminum Housed Mantles Feature: Rigid housing provides strength and durability while supporting the weight of the vessel Fabric interior to softly nest glass vessels to reduce the chance of thermal shock and damage to glassware Withstands…

  • Scienceware® Round Bottom Flask Support

    Bel-Art - SP Scienceware

    Round-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…

  • Bottom opening accommodates 60° funnels of various diameters Also accepts large capacity round bottom and pear-shaped flasks Large capacity between 10 litres to 22 litres Complete control of heating is provided by 3 separate electrical circuits that enable independent top, middle and bottom

  • Cork Lab Rings

    GSC International, Inc.

    support round bottom flasks and protect table surfaces. They are all 30mm thick (height when laying on a surface) and vary by the diameter of the ring and the hole. Used to protect your expensive laboratory glass from breakage. Available in the following sizes: 30mm x 80mm, Fits flask

  • …sizes of small, round bottom flasks. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and…

  • Cork Flask Stands

    United Scientific Supplies

    …cork, these rings are designed to support round bottom flasks, beakers, dishes and more. Cork is naturally elastic with very low thermal and electrical conductivity properties. Small cork stand has a diameter of 100mm and holds 250ml to 2000ml round bottom flasks. Large cork stand has a diameter of…

  • EXTRACT APP/STIR 6W 250ML 110V

    Techne (Cole-Parmer)

    …enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 250ml at all 6 positions Top cover is polypropylene and external surfaces are powder coated giving good general…

  • Erlenmeyer flasks. Molded of chemically resistant, autoclavable polypropylene. Graduations are permanently molded into flask. The autoclavable polypropylene ribbed flask stand supports round bottom flasks that contain up to 10 liters.  May be stacked to save space or add height. Dimensions…

  • Multi (Extraction) Mantles: 6 Recess Model

    Electrothermal (Cole-Parmer)

    …enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity from 100ml to 1000ml at all 6 positions Top cover is polypropylene and external surfaces are powder coated giving…

  • EXTRACTION APP/STIR 6WAY 500ML

    Techne (Cole-Parmer)

    …enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 500ml at all 6 positions Top cover is polypropylene and external surfaces are powder coated giving good general…

  • 3L Gas Scrubber

    Chemglass

    …reactor stands. Gas scrubbing takes place when the exhaust enters the inlet in the round bottom flask and travels upward through the absorption column. The scrubbing fluid is pumped from the round bottom flask upwards into the shower head adapter and then flows counter-current to the exhaust gas…

  • Electrothermal EMA Stirring Heating Mantles

    Electrothermal (Cole-Parmer)

    …the flask, turning the stir control to the minimum speed and ramping up slowly. If the magnetic coupling to the stir bar is lost for any reason, the stir speed control should be reduced slightly and the auto-recapture switch can be activated. Key Features Accepts round bottom flasks

  • Distillation Apparatus

    United Scientific Supplies

    …hardware necessary for simple distillation experiments. Includes: 500ml Round Bottom Borosilicate Flask with Side Tube 300mm Graham Condenser 250ml Erlenmeyer Flask Glass Stopper Support Stand (6"X9") with 24" Rod Swivel Burette Clamp Extension Clamp …

  • Round Bottom Flask Stand

    United Scientific Supplies

    Molded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.

  • …temperature control & save handling time (RC only) Run different tubes by combining AluBlocks™ (RC only) Recommendations Consider purchasing stirring bars and supports for round-bottomed flasks Choose AluBlocks™ to optimize sample heating and throughput

  • Digi-Mantles

    Electrothermal (Cole-Parmer)

    …design Round bottom flask capacity of between 250ml-1000ml "Cool-to-the-touch" design Greater stirring stability and speeds from 100 to 2000rpm Controller with display menus and touch pad interface Indicator lights for power, stirrer and heater operation Supplied with a support rod (NOTE…

  • Ideal for supporting funnels, round bottom flasks, reaction vessels, and other apparatus that requires lower support. Opening in PVC coated aluminum ring allows for easy removal of sample container. PVC coating protects glassware. Long extension arm permits depth adjustment of the open ring from the…

  • Multi (Extraction) Mantles: 3 Recess Model

    Electrothermal (Cole-Parmer)

    …enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity from 100ml to 1000ml at all 3 positions Top cover is polypropylene and external surfaces are powder coated giving…

  • …during stirring or dispersing. The AS 130.2 fixing clip attachment is for processing round flasks, measuring flasks, and Erlenmeyer flasks. Fixing clips must be ordered separately. The AS 130.4 test tube support is for small tubes, test tubes, cuvettes and centrifugal tubes that will undergo…

  • Flask support ring has a concave recess on top to support round bottom flasks from 250 to 500mL. 5-1/8" diameter.

  • PTFE Support Rings

    Chemglass

    PTFE support ring used to support round bottom flasks or cylindrical reaction vessels.

  • …carts for use with our 10L thru 100L reactor systems. Heavy Duty support cart can be used for round bottom flasks or cylindrical distillation receivers. Rear of cart incorporates 1/2” stainless steel lattice for mounting support clamps or accessories. Glassware can be quickly installed and…

  • …both filter and pressure reactor styles as well as standard round bottom flasks. It will accomodate flasks with or without bottom valves. The motor mount raises and lowers as does the flask support system. This aids in aligning the flask, motor and stir rod. Motor mount accepts all rod mounted stir…

  • …vessels. (Does not control or regulate gas/vacuum flow.) The Universal 5-way Telescopic Clamp is designed to neatly and conveniently support up to 5 round-bottom flasks, condensers, Soxhlet extractors, etc. Each clamp features five telescopic arms with Velcro® straps that can each be extended…

  • …heat dissipation to increase efficiency. Flexible fiberglass heating element for uniform heat Durable plastic-coated chemical resistant metal housing Thermally insulated and grounded for safety Round Bottom Flask Heater NOTE: HCLAMP Rod Support Attachment Sold Separately.

  • Short Path Distillation Kit

    United Scientific Supplies

    round bottom flasks after distillate is collected. PLEASE NOTE: Lab Jacks, Support Stands, Flask Stands, and Extension Clamps with Bosshead are not included in this kit. Contents: Short Path Distillation Head, Vacuum Jacketed, 24/40, 34/45 . . . . . . . . 2 Flask, Round Bottom,

  • Extraction Apparatus

    Electrothermal (Cole-Parmer)

    …enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 100ml at all 3 positions Top cover is polypropylene and external surfaces are powder coated giving good general…

  • EXTRACT APP/STIR 6W 500ML 110V

    Techne (Cole-Parmer)

    …enable easy regulation of heater, while removing sparking associated with mechanical switching Three 12.7mm diameter support rods are included Round bottom flask capacity of 500ml at all 6 positions Top cover is polypropylene and external surfaces are powder coated giving good general…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.