Propeller Stirrer

Compare Tool

Select up to 3 products

Propeller Stirrer
1 - 27 of 27
Sort
View
Show
  • 316 SS Lightweight Three-Blade Propeller

    Oakton

    Lightweight three-blade propellers have blades that twist to achieve the desired pitch.

  • Stainless Steel Shafts and Propellers

    Arrow Engineering

  • Propeller Shafts

    Troemner

    All stainless steel 303/304 are constructed with 15° pitched blades which creates an axial flow. Various shaft lengths and diameters with permanent 2" or 3.5" 3-blade propeller for every mixing need available. PTFE coating available.

  • PTFE Shafts and Propellers

    Arrow Engineering

  • Propellers

    Oakton

    Use these three-bladed electro-polished propellers for your general-purpose mixing. Use singly or mount several on a shaft for thorough agitation. Choose marine-style propellers for your general-purpose mixing or choose turbine style for your airless mixing in deep containers. Dispersion…

  • Stir-Pak® Dual-Shaft Mixers

    Oakton

    … Keyless chuck accepts shafts from 5/16" to 3/8" (8 to 10 mm) dia Mixer includes: Controller 6" (152 mm) L mounting rod and 6-ft (1.8-m) three-wire cord with plug Complete system adds: 3/8" (9.5 mm) dia x 12" (305 mm) L, shaft; 3" dia (76 mm dia) propeller; double clamp; and support stand

  • Digital Stir-Tester Accessories

    Glas-Col

    …4-blade propeller on one end Listings show shaft length x propeller diameter Stirrer Shaft, with 3-Blade Propeller 8 mm-diameter shaft has stainless steel propeller and includes coupling Shaft length 222 mm; propeller diameter 38 mm Stirrer Shaft, with Paddle-Type Propeller With…

  • Mixing Shafts

    Oakton

    Shafts are 316 stainless steel. All 3/8" (9.5 mm) dia shafts are machined on one end to accept a 5/16" (8 mm) bore diameter propeller.

  • Stirrer, Model 105, Single Shaft

    Talboys

    Constant-speed stirrer which, with the proper propeller selection, can mix over 5 gallons of water Constant speed of 1,550 rpm provides significant agitation to water-like fluids 1/80 HP Non-sparking motor is equipped with thermal overload protection and an on/off switch Although…

  • Stirring Shafts

    VELP

    …the product from the top towards the bottom, with high turbulence and high shearing forces. Thomas No. 1198F89: Stirring shaft with turbo propeller: It generates an axial flow in the container with suction of the substance from the top towards the bottom with low shearing forces. Limited danger…

  • Electric Laboratory Stirrers

    Arrow Engineering

    …6 ft. 3-wire cord with grounded plug. Shaft and propeller are made of stainless steel to resist most acids and chemicals for easier cleaning. Shaft measures 12” long x 3/8” diameter and a 2 1/2” propeller. Light Duty Stirrer (8583L20) Ideal for stirring light to…

  • Stir-Pak® General-Purpose Mixers

    Oakton

    …shafts from 5/16" to 3/8" (8 to 10 mm) dia. Mixer includes: 3/8" (9.5 mm) dia x 12" (305 mm) L, 316 stainless steel shaft; 1-1/2" (38 mm) dia propeller; 6" (152 mm) mounting rod; and 6-ft (1.8 m) grounded cord with power supply. Complete system adds: double clamp and support stand.

  • Impellers & Shafts for Caframo Overhead Stirrers

    Caframo

    …shafts.  Set screws included.  For high shear mixing at medium to high speeds. Thomas No. 1177M46 Pitched blade propeller of 65 mm (2 ½”) diameter, composed of electropolished 316L stainless steel. The 8 mm (5/16”)…

  • Labtools Stainless Steel Agitators, Shafts, and Propellers

    Eberbach

    …18” and 24” lengths recommended for Hollow Spindle Stirrers Stainless Steel Stirring Shafts Stainless Steel Shaft with fatted section for securing propeller Stainless Steel Propellers Stainless Steel Propellers come complete with wrench Stainless Steel…

  • DLS Digital Overhead Stirrer Package

    VELP

    … Viscosity: up to 25000 mPa*s Counter-reaction: constant speed even when the viscosity changes Included in the package: F201A0155 DLS Overhead Stirrer 80-260V/50-60Hz A00001300 Support Rod and Base A00001301 Double Clamp A00001307 Stirring Shaft with Propeller

  • Jiffy Mixer

    Biospec

    The small mixing shaft and head of the Jiffy Mixer is specially designed to stir viscous solutions (like food toppings, lotions, cell paste, epoxy resins, paint - anything that is 'flowable'). It thoroughly disperses and/or dissolves multi-part mixtures or suspensions of powders. Where ordinary…

  • Talboys Overhead Mixer, Model 107 & 107SC

    Troemner

    …shaft construction to maintain quiet mixing. This product line mixes large amounts of low viscous solutions when equipped with two Model 152A propellers. Both models have a continuous duty rating. Mixers include collet chuck and 8" (20.3cm) mounting rod with carriage bolt and wrench for…

  • Stirrer Accessories

    Lightnin

    Stirrer Shafts, Stainless Steel   Ends are square cut, unthreaded to accept propellers

  • Stir-Pak® Heavy-Duty Mixers

    Oakton

    … Complete System—Everything you need! These convenient, ready-made systems come complete with a mixer head, speed controller, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Heads feature a TENV,…

  • Servodyne™ Electronic Mixers

    Oakton

    …packages. Complete System—Everything you need! These convenient, ready-made systems come complete with speed controller, mixer head, shaft, propeller, clamp, and stand. Note: High-torque models include keyless chuck. Low-torque models include collet. Mixer Heads Optical shaft encoder…

  • Mixing Shafts

    Troemner

    Made of stainless steel Add propeller blades to these shafts to customize a propeller shaft Increase agitation with multiple blades on one shaft

  • Stir Shaft, 4 Blade Propeller, PTFE

    Ace Glass

    PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

  • Digital Stir-Testers

    Glas-Col

    …Available for 120 or 240 V, 50/60 Hz operation. Includes drive motor, mounting bracket, controller, 3-jaw keyless chuck and arbor, paddle, propeller and heavy-duty 90° clamp. Heavy Duty, Model HST20 Totally enclosed, 1/8 hp, permanent magnet, DC motor Direct-drive, with rpm/torque readout…

  • Air-Driven Stirrers

    Arrow Engineering

    …stainless steel stirring shaft 305 mm long, with 3-blade propeller, 64 mm diameter and shaft 9.5 mm diameter. Manufacturer recommends use of air filter (such as 4671J10) and oiler in compressed air line. Model 8583J20: Produces propeller speeds from approximately 50 to 1,200 rpm …

  • G.K.H. Stir Systems

    Glas-Col

    …slower speeds for stirring more viscous mixtures. Stirrers include motor, mounting bracket, 3-jaw keyless chuck, paddle, propeller and a right angle clamp. NOTE: Model 8836M34 Lab Stand is recommended to mount GT31 Stirrers. GT24 Stirrers (8585H60 and H64) Cool, quiet-running motors Torque:…

  • Propeller Blades

    Troemner

    Made of stainless steel. You can customize the propeller to the shaft of your choice. Several blades can be attached for increased agitation. Creates axial flow. Blades come on a bushing with a stainless steel hex-head screw and Allen key for attaching to mixing shafts.

  • Stirrer, Model 107, Single Shaft

    Talboys

    Constant-speed stirrer which can mix large amounts of low viscous solutions with the proper propeller selection Speed of 1,600 rpm provides significant agitation to water-like fluids Extremely quiet, non-sparking, 1/30 HP motor is equipped with thermal overload protection and an on/off switch …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.