Plug Seal Cap

…large volume centrifugation.  Support cushions (2602A46 for 250mL or 0330E07 for 500mL) must be used with this product unless the centrifuge rotor has appropriate V-bottom cushions Polyethylene plug seal caps Maximum RCF of 6,000xg Tubes are sterile and certified nonpyrogenic

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Falcon® polystyrene Plug Seal screw caps for 50mL centrifuge tubes are sterile. The caps are sold 50 per pack and 1,000 per case.

…A wide range of optional caps are available for these bottles: Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification Vented membrane cap with 0.22µm PTFE hydrophobic membrane PBT caps with silicone septa for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

High vacuum stopcock that eliminates exposure to corrosive materials. Use to at least 13.6 Kg internal pressure. Variable openings from 0-3mm to 0-10mm. Ultimate vacuum of 10-7 can be realized with standard three seals. Smooth acting valve permits fine

Made of polyethylene These caps have two flexible flanges to ensure a leakproof seal. They will fit into test tubes and also in round cuvettes and centrifuge tubes.

…tubes with our exclusive flat cap that includes an integral molded-in elastomeric sealing ring, or a plug style cap that includes a very deep sealing area. The flat style caps can be easily labeled and are designed to allow you to seal them to an evaporation seal with ¾ turn for one-handed…

…crafted of extra clear virgin polypropylene in natural and colors or clear virgin polystyrene. Tube caps are made of low density polyethylene for a secure seal and are available in a fluted plug style or dual position design that permits sample aspiration. Polypropylene tubes are autoclavable to…

Process tubes at their highest rated speed level (10,000 x g or greater) without leakage, even when full. Thermo Scientific™ Nalgene™ Sealing Cap Assemblies include a Viton™ fluoroelastomer o-ring. Also recommended when spinning hazardous materials compatible with centrifuge tube…

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…Screw Cap Microcentrifuge Tube Caps feature o-rings to form a secure seal. Optimized for secure short term storage in low temperatures, these autoclavable screw caps are available in a variety of colors, and adapt to your scientific experiments.  Screw Cap Microcentrifuge Tube Caps Design…

…This leakproof design comes with a revolutionary plug feature that prevents seepage when used under recommended conditions. The plug seal cap is an original Corning design featuring a contoured plug for a tight, secure seal. This Corning plug seal product design has successfully passed the 95 kPa…

…Screw Cap Decapper, 8-channel provides users with a flexible solution for capping and de capping 96 format screw caps for low-to-mid throughput environments, with easily interchangeable cartridges to switch between tube types. The 8-channel hand-held capper and de-capper offers consistent sealing at…

The Corning® orange polypropylene caps are autoclavable at 121°C, have a GLS80 thread and use a linerless plug seal design for efficient sealing. Cap Style: Plug Seal Cap Material: Polypropylene Cap Color: Orange Thread Finish: 80 GL Feature: Reusable Sterile: No

…Manifolds. The sealed VersaCap design that Foxx offers eliminates tubes twisting as you thread the cap and eliminates the tubes from sliding in and out of the container. These HPLC Reservoir Assemblies guarantee you get accurate data from your analysis with its air-tight seal using a Class VI…

…caps (9718K60) Similar to 9718K15, but cap has foamed polyethylene liner Caps are packaged separately in bags of 100. Vials with linerless polyethylene plug caps (9718K62) Polypropylene vials Size: 4 mL Bulk-packed Caps are packed separately in bags of 1,000. For replacement caps, see…

…Designed for maximum growth of anchorage dependent cells. Canted neck for easy access to growth surface. A choice of phenolic style caps, plug seal caps and vented caps for sterile gas exchange. The 75 cm 2 canted neck tissue culture flask has a wide mouth for easy pipet access. All flasks are…

Flat polyethylene seal is pre-scored with starburst design to allow easier penetration and provide better resealing. Plug is designed to easily push in and remove from the vial while still having a tight fit.

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

…when connected to reduce tube kinks. MPC Connectors are reusable, and economical enough for single use while meeting all biocompatibility requirements. Choose from a full line of connectors and configurations, including pressure sealing caps and plugs, available in sizes 1/8", 1/4", and 3/8".

Colors permit easy identification and sorting Polypropylene caps fit all 1743E10 series PYREX ® bottles ranging from 100 mL to 10 L Autoclavable to 140°C One-piece cap eliminates liners Plug seal ensures leak-free closure Case contains 20 caps

… Cap contains 0.22 mm hydrophobic filter, which prevents wetting and bacteria from growing through membrane while allowing quick, stable buffering in aCO₂ incubator. Filter membrane has a three-dimensional matrix of polyethylene fibers. Plug-seal cap guarantees maximum seal of flask,…

…contaminants from the incoming air. The sealed VersaCap® design that Foxx offers eliminates tubes twisting as you thread the cap and eliminates the tubes from sliding in and out of the container. Each assembly comes with VersaCap® GL45 Cap and Manifold & Bottle Assy., Safety Inlet…

…incoming contaminants from the incoming air. The sealed VersaCap® design that Foxx offers eliminates tubes twisting as you thread the cap and eliminates the tubes from sliding in and out of the container. Each assembly comes with 38-430 Cap and Manifold Assy, Safety Inlet vale with filter,…

Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

The red Corning® polybutylene terephthalate (PBT) high temperature caps have a GL32 thread, can be dry heat sterilized at up to 180°C and have a Polytetrafluorethylene (PTFE) liner for efficient sealing.

…tubes, and plastic culture tubes, Overfit Caps are ideal for protocols that require centrifugation, agitation, and refrigeration. Offered in a variety of bright colors, Labcon's Overfit Caps are the ideal alternative to costly parafilm or plug caps that are prone to evaporation. Designed with…

…vented cap has a 0.22µm (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. They are autoclavable at 121°C. Since these caps are vented, the flasks can be autoclaved with the cap attached.…

…pellet formation 2-piece plug and sealing cap design promostes aseptic handling For centrifugation operating temperatures from 4° to 22°C and storage to 0°C The use of support bridge (Catalog #75007686) is required Includes white polypropylene plug with silicone gasket and…

…metering plug and CG-905 for glass portion only. GLASS PLUGS, O-RINGS, 90°, CHEM-VAC™ valve with glass plug eliminates the outgassing problems associated with TFE valves. Two sidearms are sealed to the barrel at a 90º angle to one another. Valve has a glass plug with three…