Mortar And Pestle

Agate Polished Mortar and pestle both agate Sizes shown are outside width Octagonal-shaped, thick-wall agate. Mortar and pestles sold as sets only.

Made of clear, heavy, flint glass with pour spout.

Ceramic Mortar with glazed outer surface. Ceramic Pestle with glazed surface.

Melamine formaldehyde (MF), white. Resistant to boiling and autoclavable (121°C). With foot and spout.

2 oz. Glass Mortar are smotth and Free of ribs or grooves

Low contour porcelain mortar and pestle has a three inch wide surface. The pestle conforms to the entire surface of the mortar for more efficient, uniform crushing and grinding. Easy grip, low profile handle. Useful for grinding chemicals, dry biological and pharmaceutical materials, seeds, spices,…

With spout Capacity indicated in listings

Mortar: with glazed lip and outside except bottom oversized for hand comfort, glazed to grinding surface.  Pestle: oversized for hand comfort in grinding.

Mortars with lips are glazed on the outside, except for the bottom. Pestles are glazed to grinding surface. Oversized pestle for easier grinding. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at…

Agate pestle and mortar set, recommended for use with very hard samples. Agate is much harder than porcelain, thus reducing the level of impurities introduced into the sample during grinding.

Octagonal mortar and pestle sets feature highly polished grinding surface. Made of naturally hard agate stone (6.5 on Moh's Scale). For use in laboratories demanding contamination-free results.

A large, classical mortar and pestle. Hand-made from onyx stone. Absolutely beautiful to look at, each mortar and pestle has is own unique stone pattern. Use as intended or as a decorative piece. Five inches high by five inches wide, 6.5 pounds.

Our Porcelain Pestle handle is manufactured with the highest standards. The Pestle handle is glazed to grinding surface and is used for mixing, crushing and grinding.

…pieces can withstand temperatures of 1050 degrees centigrade and the unglazed pieces can withstand temperatures up to 1350 degrees centigrade. These mortar and pestle sets are available in the following sizes: 80mm D x 60ml 100mm D x 130ml 130mm D x 320ml 160mm D x 500ml

…hard, brittle materials such as ores, minerals, etc. Mortar 76 mm diameter x 25 mm high Cavity 30 mm diameter x 9.5 mm deep, fitted with precisely machined, removable sleeve for holding crushed material in cavity Pestle 76 mm long x 25 mm diameter; fits securely inside sleeve 

Mortars have pouring spout, are glazed outside only, with porcelain pestles glazed to grinding surface.  

Meets U.S. Pharmacopeia XIX. Made from hardened tool steel in accordance with specifications for Powdered Glass Test. Mortar has a flat-bottomed cylindrical cavity. Mortar: 76.2mm. O.D. cavity: 50.8mm dia x 43.9mm deep; Pestle: 50.4mm dia, 108mm overall length, Shipping. wt.: 8 Lbs

Our Porcelain Mortar is manufactured with the highest standards. The mortar are glazed outside and on inside lip. No glaze on bottom or inside grinding surface.

…a lightweight battery powered instrument that can be used with disposable pestles, mixers and micro tubes. Cell tissue and pellets are completely homogenized within seconds by means of a high speed vortexing action. The pestle features a grooved grip handle tailored to fit the microtube. The grooved…

Standard depth mortars Mortars with spout Glazed outside Inside grinding surface unglazed Mortars and pestles are sold separately. Mortar dimensions (outside diameter x height) are noted in listings.  

…in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.

Pulverize tissue and extract DNA or RNA from tiny tissue samples within a microcentrifuge tube. Stainless steel mortar has a welded fixture to hold a 1.5ml microcentrifuge tube. The mortar is suspended above a stainless steel cavity which holds the liquid nitrogen and is nested in a heavily…

Mortars & pestle are glazed all over except for grinding surfaces and the outside bottom. Pestle is oversized for hand comfort in grinding. Application: Basic Laboratory Purposes and Sample Preparation and Emulsifications

Made of hardened alloy tool steel. Pestle has ball-end to fit bottom of mortar cavity. Mortar: 3 x 3 x 4-1/2"H (76 x 76 x 114mm); bore: 2" dia x 3" deep (51 x 76mm). Pestle: 9-1/2" (241mm) overall length. Shipping. wt. 16 lbs. (7.3kg)

Deep form mortars with lips are glazed on the inside and outside. Oversized pestles are glazed to grinding surface.

Mortar and Pestle Mortar: with glazed lip and outside except bottom oversized for hand comfort, glased to grinding surface. Pestle: oversized for hand comfort in grinding.

…grinding time for 0 to 60 minutes or set for continuous operation. Reproducible results can be achieved by adjustment of the pestle pressure and timer. The KM100 mortar grinder is for loss free wet or dry grinding of batches up to 300 mL. Depending on the degree of hardness, material with a…

…Spare mortars are useful for grinding different types of samples on the same day Insulated handle is removable for saving space; 10.2cm (4") long Three suction cup feet stabilize the unit on the workbench Recommended size pestle is any size appropriate for a 275ml mortar (not included)

This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don't need to keep pieces matched during cleaning. Grinding…

…the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If used with a motor-driven…