Microcentrifuge Tube Opener

… Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5,…

Dimensions: 79mm (3-1/8") long Easily open all sizes of microcentrifuge tubes with just one hand One end opens 1.5 to 2.2ml tubes, forked blade on opposite end opens smaller sizes: 250m, 400m, and 550m tubes

Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.

…seal will not come open during processing yet will open easily with a little thumb pressure. All caps have a textured writing surface on top with a needle access target in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are…

…Centrifuge tubes have an attached flat top cap, engraved graduations and are manufactured from high quality polypropylene. The tubes have a temperature range of -80°C to 120°C. CELLTREAT Micro Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags.…

…from heavy metal RCF: 30000 x g Endotoxin level: <0.1EU Clear graduations and frosted marking area Special safelock cap design provides secure lid sealing Easy opening and closing Autoclave at 121°C/15 psi Temperature range: -80° to +121°C DNase/RNase free

… Frosted writing area on tubes and caps Freezable to -80°C Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and…

…seal that is easy to open, even when wearing gloves, and are flat with consistent thickness for trouble-free piercing. Tubes have uniform wall thickness for consistent, repeatable results. Subdivisions for approximate volume determination. Microcentrifuge tubes with lid closure are…

1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …

… Microcentrifuge Tube Racks. Polypropylene . Available in Red or Blue. For 1.5 ml micro test tubes. Can accommodate 50 micro tubes with lid open (without interfering) or 100 micro tubes with lid closed or without lids. Racks are stackable even when completely loaded with test tubes.

… These Simport Centrifuge Tubes offer superb quality and performance at an affordable price. They feature an extended lip for easy opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification. These Simport centrifuge tubes withstand centrifugal forces…

…applications in molecular biology, chemistry, and biochemistry. Safer than ever: Flex Tubes® can be centrifuged up to 30,000 × g without any problems! Features Tube lid is easy to open and close for ergonomic operation Polypropylene provides high resistance to…

…the tube for sample accessibility. Expect the same high performance as other trusted Axygen Snaplock microcentrifuge tubes. Features include: Will withstand up to 14,000 RCF Frosted cap Snaplock cap assures an efficient seal, yet is still easy to “flip” open …

… Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at 20°C with an aqueous solution. Tubes are packaged in two bags of 500 tubes per case, except for 2591L95.

…Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Proprietary low-binding or low retention resin maximizes sample recovery Boilproof Low binding tubes fit all standard 0.5,…

…tubes feature an extra-thick and durable wall that can withstand centrifugation to 40,000 x G. The ultra-clear polypropylene resin gives you a clear view of the pellet as well as correct color rendition. Designed with ergonomic caps and smooth surfaces that make this tube easy to open and reduces…

…SureSeal S™ microcentrifuge tubes are designed for a broad range of research applications, including enzyme digests, DNA isolation/purification, centrifugation, incubation and general sample/reagent storage. With a variety of design advances, SureSeal Tubes improve sample visualization,…

…all current microcentrifuge instruments Safe and Reliable - External threads minimize contamination, material hang-up and loss. Screw cap is made of the same material as tube Convenient - Molded ridges on tubes match serrations on racks (Cat. No. 4214), so tubes may be opened with one hand.…

…Tubes are guaranteed to withstand forces up to 30,000 x g, allowing you to safely centrifuge without sample loss. Seal safety! During incubation in a boiling water bath, only the Eppendorf Safe–Lock Tubes remained safely closed. 10 % to 20 % opened lids were found for the tubes of…

The myFuge™ 5 microcentrifuge includes a four position rotor for compatibilty with a variety of 5ml test tubes, including 5ml snap cap centrifuge tubes. In addition, this combination rotor has four additional slots for centrifuging standard microtubes (1.5/2.0ml). Simply close the lid and the…

…speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for easy removal of samples. Unique rotor holds 12 position PCR strips "Mini" sized,…

…it from being opened while the rotor is still in motion, a splash proof display, and a unique imbalance detection system designed to automatically power down the motor in the event of improper loading of the rotor, or any tube breakage. The Z167-M is the perfect microcentrifuge for any lab. …

2.0mL Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

5mL Posi-Lock™ Graduated Microcentrifuge tubes feature large, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 5.0mL centrifuge rotors, racks, and storage boxes. Designed to fit all rotors, racks,…

0.6mL Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 0.5mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits standard centrifuge rotors, racks, and storage boxes Graduated every 100µL for easy volume…

…the globe. These strip tubes are extremely transparent which makes them the optimum choice for applications of optical qPCR signal. Open PCR strip tube, strip of 8 flat caps are also available which can be used to cover both 0.1 and 0.2mL tubes. Capp Expell 0.1 mL tubes are 15.6-16.6 mm high and…

…from highest quality, virgin, single melt polypropylene Our latest 1.7 ml microcentrifuge tubes with Posi-Click design incorporates over 20 improvements that have made these tubes our #1 seller. The tubes seal easily with a distinct "click" and stay closed through incubation, freezing and…

Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending   Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …

…contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered…

…Tubes are guaranteed to withstand forces up to 30,000 x g, allowing you to safely centrifuge without sample loss. Seal safety! During incubation in a boiling water bath, only the Eppendorf Safe–Lock Tubes remained safely closed. 10 % to 20 % opened lids were found for the tubes of…

…Tubes are guaranteed to withstand forces up to 30,000 x g, allowing you to safely centrifuge without sample loss. Seal safety! During incubation in a boiling water bath, only the Eppendorf Safe–Lock Tubes remained safely closed. 10 % to 20 % opened lids were found for the tubes of…