Liquid Liquid Extractors

Compare Tool

Select up to 3 products

Liquid Liquid Extractors
1 - 21 of 21
Sort
View
Show
  • A liquid-liquid extractor for use with lighter or heavier-than-water extracting solvents. Overflow and boil-up tube uses Ace-Thred Connections, thus allowing easy removal for cleaning to reduce cross contamination among samples. Complete consists of:Extractor Body, (approx.1.3L capacity), Dispersion…

  • For extraction with liquids of lighter density than liquid extracted such as water with ether; 9422 and 9414 are used with extraction flask 9451.

  • …a stop-cock assembly and 3-ball Snyder column, the Corning One-Step extractor can both extract desired analytes as well as evaporate solvent from the end by-product within the same cycle. The Corning One-Step extractor comes with an electronic side control box which enables the operator…

  • Flask only, part of 9428 liquid-liquid extractor.

  • …a 2mm PTFE stopcock in the return tube. Stopcock stops the flow after the extraction is complete. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered separately.

  • …625 (base neutrals/acid extractables). Accommodates 1L sample and approximately 200mL of a heavier-than-water extracting solvent. Features an extractor body designed to accept a common condenser with a 45/50 joint, a 24/40 opening with a PTFE stopper near top of body for addition of reagents and…

  • …single piece continuous liquid/liquid extractor is for use with solvents of heavier specific gravity than sample liquid being extracted. It is designed to meet EPA test method requirements outlined by SW-846, RCRA, and CLP. The sidearm is sealed to the extractor body just below the 45/50 Standard…

  • Wide selection of sizes Most Soxhlet extractor sizes Consistent wall thickness High-purity glass binderless microfiber Common Cellulose Thimble applications include fat determination of meat and dairy products, determination of PCB in fish products, determination of free fats in food products,…

  • Round bottom design has the return tube sealed into the bottom of the extractor for more efficient extractions. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered…

  • …cotton linter for high-performance use in automated Soxhlet extractor systems. Used in air and waste gas analysis. OtherWhatman extraction thimbles are available from Cytiva business. Cellulose thimble options for Soxhlet extractor systems Standard extraction thimbles have a wall…

  • Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted.  Extraction and concentration can be done in 1/3 of the time.…

  • Extractor designed for EPA priority pollutant samples where the extracting solvent is heavier than water. For samples of 1 liter plus approximately 200mL of extracting solvent. Extractor has a 45/50 top outer joint and a 24/40 inner joint on the uptake tube. Flask and condenser must be ordered…

  • The ROT-X-TRACT-S® rotary Soxhlet extractor can accommodate up to 8 or 10 Soxhlet extractors. The bath cover disk holes can accommodate round sample flasks from 125 mL to 1 L. A wide range of sample sizes and quantities make this instrument ideal for Soxhlet extraction of samples in any lab. …

  • This 1L PYREX® extractor body has a 45/50 Standard Taper outer top joint, a middle 35/25 Spherical Joint ball joint and a bottom 18/9 Spherical Joint socket joint. It is a component of the modular Continuous Heavier than Water Liquid/Liquid Extractor (Nos. 3922-M and 3924-M) and…

  • Micro Soxhlet Extraction Apparatus

    DWK Life Sciences (Wheaton)

    …containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask Wetted parts are manufactured…

  • Tube only, for use with extraction flask 9451.

  • This PYREX® extractor body with a 45/50 Standard Taper outer top joint and a 24/40 Standard Taper inner bottom joint is a replacement for the One Piece Continuous Heavier than Water Liquid/Liquid Extractor System.

  • …separation of a substance or a group of elements from solid and semi-solid samples according to the Randall technique. Beats Ordinary Soxhlet Extractor Up to 5 times faster than traditional Soxhlet (hot solvent vs. cold solvent) Low solvent consumption (high solvent recovery, up…

  • …and power generation industries. Accurate and easy to operate, Norwell® Mucksuckers feature a piston-style extractor that provides high-suction syringe action for liquid sampling. They also feature a push/seal bottom that closes the sampling tube with a quick push against a solid surface,…

  • Chamber only, for use extraction flask 9451.

  • 125 ml App, Soxhlet Extraction, Gnd

    DWK Life Sciences (Wheaton)

    …containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask. All wetted parts are manufactured…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.