Kinematic Viscosity Bath

Compare Tool

Select up to 3 products

Kinematic Viscosity Bath
1 - 19 of 19
Sort
View
Show

  • CT-500 And CT-518 Constant Temperature Baths

    Cannon Instrument

    …accurate temperature control of 0.01°C within the range of 20° to 100°C, providing the temperature sensitivity required by ASTM D 445 for kinematic viscosity measurements. A cooling coil, when connected to tap water or a cooling system, permits operation below or slightly above ambient temperature.…

  • CT-1000 Constant Temperature Baths

    Cannon Instrument

    …100°C and 0.03°C above 100°C, providing the temperature sensitivity required by ASTM D 445 for kinematic viscosity measurements. Two electric heating elements inside the bath rapidly heat the medium to any desired temperature within the range. A cooling coil, when connected to tap water…

  • BS/IP/RF U-Tube Reversed Flow Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of opaque Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.3%. Minimum sample volume: 7 mL. Requires liquid bath depth of 280 mm (11"). Includes certificate…

  • Cannon-Ubbelohde UBU And UBC Series

    Cannon Instrument

    Uncalibrated and Calibrated Viscometers Measure kinematic viscosity of transparent Newtonian liquids by suspended level principle Meets ASTM D 445 and D 446 and ISO 3104 and 3105 requirements. Precision: ±0.2% Similar to Cannon-Ubbelohde but less rugged in design.…

  • SimpleVIS™ Portable Viscometer

    Cannon Instrument

    …tool for quick and reliable kinematic viscosity measurement. The SimpleVIS™ provides exceptional temperature control which is paramount to accurate viscosity measurement of petroleum liquids. If your site needs to test near laboratory quality viscosity measurements, the the SimpleVIS™…

  • Semi-Micro, Cannon CUSMC Series Viscometer

    Cannon Instrument

    …measurement of kinematic viscosity of small samples of transparent Newtonian liquids Meets ASTM Standard D 445; specifications conform with ASTM Standard D 446 Viscometer constant is same at all temperatures Initial sample can be diluted to as much as 20 mL for intrinsic viscosity determinations …

  • Viscoball Viscometer

    Fungilab

    Fungilab's Viscoball is an accurate kinematic viscometer suitable for the testing of transparent Newtonian liquids and gases. The Viscoball provides measurements for low viscosity substances in the food, chemical, cosmetic, pharmaceutical, and petrochemical industries. The improved visibility of…

  • Cannon-Fenske Series Viscometers

    Cannon Instrument

    …Type; Measures kinematic viscosity of dark Newtonian liquids Meets ASTM D 445 and ISO 3104 requirements Measures liquids whose meniscus cannot be seen at the timing marks when using Routine-type viscometers Precision: ± 0.3% Also used to measure kinematic viscosity of liquid…

  • BS/IP/SL Suspended Level Viscometer

    Cannon Instrument

    …viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105 Precision: ±0.2% Minimum sample volume: 11 mL. Requires liquid bath depth of 250 mm (10”). Includes…

  • CT-600 Constant Temperature Bath

    Cannon Instrument

    …switch on the front panel facilitates rapid setting of ten popular temperatures for kinematic viscosity determinations: 10, 15, 20, 25, 30, 40, 50, 60, 80, and 100°C. After the switch has been set the bath will equilibrate to within a fraction of a degree of the desired temperature. A fine-tuning…

  • TE-3000 Constant (Low) Temperature Bath

    Cannon Instrument

    …selectable operation Continuous on-screen monitoring of bath temperature through built-in platinum resistance thermometer Meets ASTM D 445 requirements for measurements of kinematic viscosity at low temperatures Bath and calibration temperatures can be entered digitally on keypad.…

  • BS/U/M Miniature U-Tube

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Precision: ±0.2% Specifications conform to ASTM D 446 and ISO 3105. Minimum sample volume: 2 mL. Requires liquid bath depth of 230 mm (9"). Includes certificate of…

  • BS/IP/MSL Miniature Suspended Level Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision:±0.2%. Minimum sample volume:4 mL. Requires liquid bath of 305 mm (12”). Includes certificate of…

  • Zeitfuchs Cross-Arm Unity Factor, Found Holder, ZCAXC-RO Series Viscometers

    Cannon Instrument

    kinematic viscosity of cut-back asphalts and road oils at 140°F and asphalt cements at 275°F in the range of 30 to 6000 centistokes by ASTM Standard D 2170. It is recommended that 9726A20 or A25 Constant Temperature Bath be used for work at 275°F. Can be filled and cleaned while in bath.

  • BS/IP/SL(S) Viscometers

    Cannon Instrument

    Calibrated viscometers For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume:10 mL. Requires liquid bath depth of 230 mm (9”). Includes certificate of…

  • BS/U Tube Viscometers

    Cannon Instrument

    … For measuring kinematic viscosity of transparent Newtonian liquids Meets ASTM D 445 and ISO 3104 Specifications conform to ASTM D 446 and ISO 3105. Precision: ±0.2%. Minimum sample volume: 7 mL in sizes A to C; 12 mL in sizes D to F ; 23 mL in sizes G and H. Requires liquid bath depth of 280 mm…

  • Zeitfuchs Cross-Arm Calibrated Viscometers

    Cannon Instrument

    … Also used to measure kinematic viscosity of cut-back asphalts and road oils at 140°F (60°C) and asphalt cements at 275°F (135°C) in range of 30 to 6,000 centistokes according to ASTM Standard D 2170 (see Table 3). Can be filled and cleaned while in constant temperature bath. Minimum sample volume:…

  • Cannon-Manning Semi-Micro, Cannon CMSMC Series Viscometers

    Cannon Instrument

    Calibrated Viscometers For measurement of kinematic viscosity of small samples of transparent Newtonian liquids, particularly petroleum products or lubricants Meets ASTM D 445 requirements Precision: ±0.2% Specifications conform with ASTM Standard D 446. Minimum sample…

  • Cannon-Ubbelohde, CUU And CUC Series Viscometers

    Cannon Instrument

    Uncalibrated and Calibrated Viscometers Suspended level viscometer for measurement of kinematic viscosity of transparent Newtonian liquids Also used for evaluating jet fuels and hydraulic fluids Meets ASTM D 445 and D 446, as well as ISO 3104 and 3105 requirements Suitable for use at…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.